4/17/2020. 1) LOCATE AND MARK CENTER OF VEHICLE BUMPER BEAM. 2) POSTION HITCH OVER BUMPER BEAM ON CENTER MARK. SECURE WITH ...
Curt Adjustable RV Bumper Hitch | Thoroughbred Diesel
19100 RV BUMPER HITCH (4" X 4" only) 4/17/2020 GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 3,500 LBS. TRAILER WEIGHT & 350 LBS. TONGUE WEIGHT. * * * DO N OT EX CEED V EH ICLE MAN UFACTURER'S RECOM MENDED T OWIN G CAPACI TY.* * * WARNING: ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY 18050 STABILIZING STRAPS HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-877-287-8634 Parts List ITEM QTY PART NUMBER DESCRIPTION 1 4 10-10174 BOLT,CAR,1/2-13 UNC,5-1/2,GRD5 2 4 20-00165 NUT,SER-FLANGE,1/2-13 UNC,GRD5,CZ 2 1 BUMPER BEAM HITCH WEIGHT: 8 LBS. INSTALL TIME: 10 MINUTES INSTALL NOTES: INSTALLATION STEPS 1) LOCATE AND MARK CENTER OF VEHICLE BUMPER BEAM. 2) POSTION HITCH OVER BUMPER BEAM ON CENTER MARK. SECURE WITH 1/2-13" CARRIAGE BOLTS AND FLANGE NUTS. 3) TORQUE ALL 1/2" FASTENERS TO 64 LB-FT. PERIODICALLY CHECK THI S RECEIVER HITCH TO ENSURE THAT ALL FASTENERS ARE TI GH T AND TH AT ALL STRU CT URAL COM PON ENTS ARE SOUN D. Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.PDF Replacer PDF Replacer