btacc trainingcoursesv20200604 Bosch Security and Communications Training Academy
North America Course Catalog
Table of Contents
Introduction Training Guidelines Bosch training facility locations Pricing structure for technical training Cancellation policy Continuing Education Units (CEU's) Virtual Training Course registration Online training courses Access Access Easy Controller (AEC) Access Access Control Systems Professional Level online trainings and exams Communications Mass Notification and Life Safety OMNEO IP Basics PLENA Matrix Technical Professional Online training courses Electro-Voice & Dynacord - Retail Partner - Professional Level Electro-Voice & Dynacord - Retail Partner - Expert Level Electro-Voice & Dynacord - Live Sound Partner - Professional Level Electro-Voice & Dynacord - Live Sound Partner - Expert Level Online training courses Electro-Voice & Dynacord - Install Partner - Professional Level Electro-Voice & Dynacord - Install Partner - Expert Level PAVIRO Professional Level PAVIRO Expert Level Online training courses PRAESIDEO Professional Level DICENTIS Professional RTS Intercom Full Range Training - Professional Level DCN-NG Conference System Fire FPA 1000 Fire Alarm Control Panel FPD-7024 Fire Control Panel Professional Basics of Video Fire Detection
2 | Training Academy
5
(Online Courses continued)
Intrusion
20
6
G Series/B Series Professional Training (US/Canada)
20
6
B Series Professional Training (US)
20
7
Intrusion System Fundamentals
20
7
Introduction to IP Networking for Intrusion
21
G Series/B Series Integrated Intrusion Systems Overview
21
7
Intrusion Detector Fundamentals
22
8
G Series/B Series Installation
22
8
B Series Installation
22
10
Introduction to RPS Programming
23
Advanced RPS Programming
23
10
Intrusion and IP Camera Integration
24
10
Cellular for Intrusion Systems (US)
24
10
Cellular for Canada
25
10
Introduction to Remote Connect
25
11
Introduction to Z-Wave Home Control Services
26
11
B465 Dual Path Communicator: Installation and Programming
26
11
Conettix Receiver Setup
26
11
ISC-SK10 Shock Sensor
27
12
GV4 Overview
27
12
B940W Slim Touch Keypad Product Introduction Training
28
12
G Series/B Series Expert Recertification
28
13
G Series/B Series Master Recertification
28
13
Video Solutions
29
14
Bosch Video Systems Professional Certification (commercial)
29
14
Bosch IP Basics for Video Solutions
29
14
IP Camera Essentials
30
15
Bosch Video Systems Expert Certification (system design)
30
15
Video Analytics Technical Certification Training
30
Bosch License Plate Capture
31
16
IP Recording Essentials
31
16
BVMS Professional Level Online Training Plan: Technical Focus
32
16
BVMS Operator Client
32
17
DIVAR IP 2000 and 6000 Appliances
33
17
DIVAR IP 3000 and 7000 Appliances
34
18
Network Basics
34
18
Classroom training courses
35
18
19
Access Control
35
Access Control Systems - Access Professional Edition (APE)
35
Access Management Systems (AMS) Expert Level trainings and exams
35
Access Control Systems - Access Management System (AMS) Master Training
36
Course Catalog | 3
classroom Courses continued) Communications Conferencing DCN -- Next Generation Telex Radio Dispatch Certification Training Praesideo RTS Intercom Full Range Training - Master Level Electro-Voice & Dynacord Live Sound Partner Master Level Electro-Voice & Dynacord Install Partner Master Level FPD-7024 Expert
Intrusion B Series Expert Certification (US) G Series/B Series Expert Certification (US) G Series/B Series Expert Certification (Canada) G Series Master Certification (US)
Video Solutions Bosch Video Management System Expert with NetApp Certification Bosch Video Management System Expert with Appliance Storage Certification Bosch Video Management System Master Certification Bosch Video Essentials Master Certification DIVAR 1 Day Overview Cyber (Data) Security Technical Certification
Introduction
37
Bosch Security and Safety Systems is a division of the
37
Bosch Group and is a leading global supplier of security,
38
safety and communications products. We are committed
39
to providing our customers with innovative, high quality
39
solutions backed by world-class customer service
40
and support.
40
Our broad range of scalable, innovative and reliable
41
products, extensive training programs and our
41
technically competent staff enable you to design
41
dependable solutions from a supplier you can trust.
42
The superior performance of Bosch products combined
42
with reduced system downtime lowers call back costs
43
and leads to greater end user satisfaction and retention.
43
At Bosch, design, innovation and quality are top
43
priorities. Our significant investment in research and
44
development enables you to maintain your competitive
44
edge. Our training programs ensure you understand
45
how to get the most from our systems.
45
46
If you have any questions, please feel free to contact
us at training@us.bosch.com or 8002890096.
4 | Training Academy
Course Catalog | 5
Training Guidelines
Bosch now offers a state-of-the-art Learning Management System (LMS). This site improves a customer's ability to register for a course, track in-progress and completed courses, as well as to easily print certificates. Below is a list of policies and guidelines to enhance your training experience.
1. Customers must first register for access to the Training Website. To register, go to https://academy.globalteach.com/ST/Login.aspx and click on Register under New Users. Fill out the form and click Submit. (Please note: You choose your own User ID. Be sure it is something you will remember).
2. Course registrations are accepted only through the Training Website.
3. Confirmation of registration will be sent automatically upon registering for any course without a course fee. For courses with a fee, an emailed receipt will be sent once payment has been provided by the customer, then processed by Bosch. Processing can take up to 72 business hours. 4. Bosch Security and Safety Systems has the right
to cancel a course, with at least 10 business days notice, in the case of insufficient enrollment.
5. Enrollment in a course can be canceled by a participant up to 10 business days prior to the start of the course with no penalty. Customers who cancel with less than 10 business days notice or those who do not attend a course after registering are subject to a $500 cancellation/ no-show fee.
6. It is permissible to send a substitute participant to the course. Advanced notification of the change is always appreciated.
Bosch training facility locations
The Bosch Security and Communications Training Facilities located in Greenville (Greer), South Carolina; Rochester (Fairport), New York; Lancaster, Pennsylvania; Lincoln, Nebraska; Minneapolis (Burnsville), Minnesota; and Ontario, California; host a variety of training opportunities each month. Each course offered is outlined in the following pages, with information on prerequisites and CEUs. To find out more about Bosch Security and Communications Training and how we can support your development, please read on.
If you have any additional questions about training opportunities, please contact the Training Academy via email at training@us.bosch.com or by phone at 8002890096, option 7.
Burnsville, MN 12000 Portland Avenue S. Burnsville, MN 55337
Greer, SC 140 Caliber Ridge Dr. Greer, SC 29651
Lincoln, NE 8601 East Cornhusker Highway Lincoln, NE 68507
Fairport, NY 130 Perinton Parkway Fairport, NY 14450
Lancaster, PA 1706 Hempstead Road Lancaster, PA 17601
Ontario, CA 4641 E. Guasti Road Ontario, CA 91761
6 | Training Academy
Pricing structure for technical training
Bosch offers three certification levels - Professional, Expert, and Master - that ensure consistency for training across our security product portfolio. Pricing for training is also now standardized across the portfolio.
Training level
Fee for training
1. Professional
Web-based training
Free No charge for web-based training
2. Expert Instructor-led training in a classroom or virtual
$150 per person / per day (plus registration fee for classrooms) Instructor-led training (ILT) F.01U.352.824r
3. Master Instructor-led training in a classroom or virtual
$200 per person / per day (plus registration fee for classrooms) Instructor-led training (ILT) F.01U.352.825
4. Private Instructor-led training at a customer site or virtual
$1800 per day (registration fee waived) Expert or Master Instructor-led training (ILT) F.01U.352.827 $1800 per class Virtual
Registration fee: Cancellation fee:
Cancellation policy
$45 per person for classroom registrations $45 per person for classroom registrations Not applicable for virtual trainings
Registration cancellations with more than 10 business days advanced notice will receive a full refund.
Cancellations from 1 to 10 business days prior to the start of the course will receive a refund with the exception of the $45 registration fee.
Registrants who do not attend and do not cancel will not receive a refund.
Continuing Education Units (CEU's)
You may be eligible for continuing education credits for completing the following classes: -GB Series Professional -G/B Series Expert -BVMS Professional -BVMS Expert -FPD-7024 Expert
Please reach out to training@us.bosch.com to see if our classes are accredited in your state.
Course Catalog | 7
Virtual Training
To better accommodate for your needs, some classroom courses may also be offered virtually. Visit the course description to see if this is available for your course. Please reach out to your regional sales rep or training@us.bosch.com for any questions.
Course registration
Bosch Security Acedemy: https://academy.globalteach.com/ST/Login.aspx Bosch Communications Academy: https://academy.globalteach.com/Communications/Login.aspx
1. Courses will be under the "Training
1
Courses" tab.
2. Choose the appropriate folder for the
2
product training you would like.
8 | Training Academy
3. After choosing a course, click the Open Training Plan or Register Button.
3
4. On the left-hand side, there are the
online prerequisite modules, the final exam,
and the Classroom course. Choose the
4
item that says (Classroom) then click the
tab for Registration. Registration for virtual
courses will be closed 5pm EST the Friday
before the training.
56
5. Choose a specific course date, then click Book.
6. If the course is free, then you will be automatically registered. If the course requires payment you will be in the class as "requested" and will receive payment instructions to your email.
Course Catalog | 9
Online training courses
Access
Content
Target audience Purpose
Prerequisites Duration Location
Access Easy Controller (AEC)
Product overview Initial controller configuration Video features
Hardware installation System configuration Utility programs
Dealers, Installers, and Service Technicians
After completing this course, you will be able to: Describe the features of AEC Identify appropriate applications for AEC Discuss the benefits of the AEC system
None 3 hours Online at https://academy.globalteach.com/ST/Catalog.aspx
Access
Content
Target audience Purpose
Prerequisites Duration Location
Access Control Systems Professional Level online trainings and exams
IP Networking Access Modular Controller AMC Readers and Credentials - RaC System engineers, administrators and installers who will install and work with AMS The Professional Level Training Plan targets to provide you some general access control knowledge and a detailed knowledge of the Bosch Access Modular Controller (AMC) Product Family.
This knowledge is essential to participate and understand the content of the AMS and BIS Expert and Master Level Trainings.
None 5 hour Online at https://academy.globalteach.com/ST/Catalog.aspx
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
10 | Training Academy
Online training courses
Communications
Content
Target audience Purpose
Prerequisites Duration Location
Mass Notification and Life Safety
New, major changes to the National Fire Code Intelligibility influences on building and acoustic design System example
Dealers, Installers, and Service Technicians
After completing this course, you will be able to: Understand why NFPA made code changes Explain the NFPA code changes Describe a mass notification system List tools for modeling sound
None 1 hour Online at https://academy.globalteach.com/ST/Catalog.aspx
Communications
Content Target audience Purpose
Prerequisites Duration Location
OMNEO IP Basics
OMNEO Basics OMNEO elements
Media networking requirements OMNEO architecture
Dealers, Installers, and Service Technicians
After completing this course, you will be able to: Explain requirements and challenges for media networking Describe program transport Explain system control Discuss OMNEO architectur
None
30 minutes
Online at https://academy.globalteach.com/ST/Catalog.aspx
Communications
Content
Target audience Purpose
Prerequisites Duration Location
PLENA Matrix Technical Professional
-PLENA Matrix System Introduction -Hardware Installation Introduction -Matrix Mixer PC Graphic User Interface (GUI) -Amplifier, Graphic User Interface (GUI) System Knowledge Assessment
Installers, Dealers, and End Users
After completing this course, you will be able to: Have a better understanding of the PLENA Matrix in regards to: Product Overview,
Hardware & Installation, Matrix Mixer PC GUI and Amplifier PC GUIE & iOS GUI
None
3 hours
Online at https://academy.globalteach.com/ST/Catalog.aspx
**Bosch Security and Safety Systems has submitted the course outline to InfoComm for credit evaluation. Credits earned will be printed on the certificate of completion for the course.
Course Catalog | 11
Online training courses
Communications
Content
Target audience Purpose
Prerequisites Duration Location
Electro-Voice & Dynacord - Retail Partner - Professional Level
Dynacord & Electro-Voice Professional Systems Acoustic Basics
Dynacord & Electro-Voice Professional Systems Acoustic Basics Signal Chain
Dynacord L Series Amplifiers Product Training
EVOLVE 50 and EVOLVE 30M Introductions
Portable Speakers Portfolio Overview
Retail Partners, Sales managers with commercial & marketing focus
After completing this course, you will be able to: Contrast different applications for Electro-Voice portable speakers and Dynacord
L-Series amplifiers Perceive the particularities of signal chain in audio systems Have a comprehensive view about Electro-Voice and Dynacord solutions for retai
market
None
3 hours
Online at https://academy.globalteach.com/ST/Catalog.aspx
Communications
Content
Target audience Purpose
Electro-Voice & Dynacord - Retail Partner - Expert Level
Dynacord L Series Amplifiers System Training Electro-Voice ZLX + ELX200 Demo Guides and
Set-Up Examples Electro-Voice EKX + ETX Demo Guides and
Set-Up Examples
Electro-Voice EVOLVE 50 Demo Guide and Set-Up Examples
LOUD & CLEAR Academy
Retail Partners, Sales managers with commercial & marketing focus
After completing this course, you will be able to: Contrast different applications for Electro-Voice portable speakers and Dynacord
L-Series amplifiers Describe to choose the correct L amplifiers models for a project, based on system
design examples Understand how to demonstrate Electro-Voice speakers and Dynacord L series
amplifiers to various audiences Create different strategies to approach the customer with the solution which best
suits their needs
Prerequisites Duration Location
Retail Partner Training Professional Level Certificate 3 hours Online at https://academy.globalteach.com/ST/Catalog.aspx
Online training courses
Communications
Content
Target audience Purpose
Prerequisites Duration Location
Electro-Voice & Dynacord - Live Sound Partner - Professional Level
Dynacord & Electro-Voice Professional Systems Room Acoustics, Acoustic Basics & Signal Chain
Live Sound System Introduction and Portfolio Dynacord L and TGX Series Amplifiers Product
Training
Electro-Voice N8000 digital matrix product training
OMNEO / DANTE Networking Professional Level (IP-Basics & DANTE / OMNEO overview)
Live Sound Partners, Sound engineers & system technicians
After completing this course, you will be able to: Understand introductory concepts about room acoustics and weight its
importance in audio projects Perceive the particularities of signal chain in audio systems Understand EV & DC Live Sound Systems portfolio Identify EV & DC electronics and software components applied for rental partners Show basic knowledge on IP Networks and Audio Networks and to know their
relevance for rental sound system applications Recognize OMNEO / DANTE features and advantages in the audio IP world
None
4 hours
Online at https://academy.globalteach.com/ST/Catalog.aspx
Communications
Content
Target audience Purpose
Prerequisites Duration Location
Electro-Voice & Dynacord - Live Sound Partner - Expert Level
IRIS-Net General Software Introduction + EASE Focus 3 Quick Start Guide
Configuration and Control software introduction Acoustic prediction software introduction
OMNEO / DANTE Networking Expert Level (IP-Advanced & OMNEO tools)
System Design Examples with Dynacord L & TGX Series Amplifiers
Live Sound Partners, Sound engineers & system technicians
After completing this course, you will be able to: Explain how to choose the correct amplifier models based on system design examples. Design a highly economic, efficient and reliable sound system with L series & TGX
series amplifiers Understand principles of IP addressing, subnet masks and the role of network and
host IDs in IP based networks Describe how to use and setup OMNEO / DANTE tools Recognize the principles of SONICUE (configuration and control software) Recognize introductory concepts of IRIS-Net software Create a basic EASE Focus 3 project
Live Sound Training Professional Level Certificate (Online)
5 hours
Online at https://academy.globalteach.com/ST/Catalog.aspx
12 | Training Academy
Course Catalog | 13
Online training courses
Communications
Content
Target audience Purpose
Prerequisites Duration Location
Electro-Voice & Dynacord - Install Partner - Professional Level
Dynacord & Electro-Voice Professional Systems Room Acoustics, Acoustic Basics & Signal Chain
Install Sound System introduction Dynacord C Series Amplifiers Product Training
Dynacord IPX Series Amplifiers Product Training
Electro-Voice N8000 digital matrix OMNEO / DANTE Networking
Professional Level (IP-Basics & OMNEO overview)
Live Sound Partners, Sound engineers & system technicians
After completing this course, you will be able to: Understand introductory concepts about room acoustics and weight its importance in
audio projects Perceive the particularities of signal chain in audio systems Describe the Dynacord and Electro-Voice electronics and software components
designed for Install partners Recognize basic knowledge on IP Networks and Audio Networks Recognize the principles of SONICUE (configuration and control software) Explain OMNEO / DANTE features and advantages in the audio IP world
None
4 hours
Online at https://academy.globalteach.com/ST/Catalog.aspx
Communications
Content
Target audience Purpose
Prerequisites Duration Location
Electro-Voice & Dynacord - Install Partner - Expert Level
IRIS-Net General Software Introduction OMNEO / DANTE Networking Expert Level
(IP-Advanced & OMNEO tools)
Dynacord IPX Series Amplifiers System Training
Dynacord C Series Amplifiers System Training
Install Partners and Sales engineers & system technicians
After completing this course, you will be able to: Understand the IRIS-Net software Describe how to choose the correct amplifier models based on system design examples Design a highly economic, efficient and reliable sound system with L series &
TGX series amplifiers Understand principles of IP addressing, subnet masks and the role of network
and hots IDs Use and setup OMNEO / DANTE tools Demonstrate how to program IRIS-Net user interfaces using standard IRIS-Net
elements and observing basic project design rules Recognize the principles of configuration and control software Identify the features of acoustic prediction software
Install Partner Training Professional Level Certificate 5 hours Online at https://academy.globalteach.com/ST/Catalog.aspx
14 | Training Academy
Online training courses
Communications
Content
Target audience Purpose
PAVIRO Professional Level
PAVIRO System Introduction (V2) PAVIRO Controller, Amplifier, Router &
Call Station
PAVIRO Loudspeaker Topologies Introduction & Line Supervision
PAVIRO Networked Introduction
EVAC Partners, Sales and marketing staff of customers, consultants, specifiers
After completing this course, you will be able to: Give an overview of the PAVIRO system Describe the hardware setup and the application of the PAVIRO devices Understand terms like CAN bus and CST bus Choose between the different types of loudspeaker line supervision according
to application requirements Draft a simple PAVIRO system setup Understand different topologies and relation to router clusters Select the right number of routers and amplifiers Understand speaker line power allocation Understand the signal flow between the system components Understand the PAVIRO networking functions and features
Prerequisites Duration Location
None 5 hours Online at https://academy.globalteach.com/ST/Catalog.aspx
Communications
Content
Target audience Purpose
PAVIRO Expert Level
Includes 5 project design examples from Spec to BOM Shopping Centre School Hotel Sports Centre Networked Systems It also includes a Network
Basics WBT
EVAC Partners, -Consultants, System Designers
After completing this course, you will be able to: Transfer technical and functional project requirement specifications
into a correct system design and turn it into a Bill of Materials
Prerequisites Duration Location
PAVIRO Training - Professional Level 3 hours 30 min Online at https://academy.globalteach.com/ST/Catalog.aspx
Course Catalog | 15
Online training courses
Communications
Content
PRAESIDEO Professional Level
PRAESIDEO Introduction PRAESIDEO Architecture PRAESIDEO Priorities PRAESIDEO Call Station Keypad Functions PRAESIDEO Control input functions PRAESIDEO Control output functions
PRAESIDEO Key characteristics PRAESIDEO Call macro's PRAESIDEO PC connection PRAESIDEO Security PRAESIDEO Software 4.nn
Target audience Purpose
Engineers and installing companies, sales and marketing staff, system specifiers
After completing this course, you will be able to: Understand the basics of the PRAESIDEO system and should be ready to participate
in the PRAESIDEO Classroom Training
Prerequisites
Duration Location
Basic knowledge of electronics, acoustics and public address systems. Optional: PA Basics Online Training 2 hours
Online at https://academy.globalteach.com/ST/Catalog.aspx
Communications
Content
Target audience Purpose
DICENTIS Professional
OMNEO Networking Professional Level (IP-Basics & OMNEO overview)
The DICENTIS System applications Central equipment Discussion devices
Microphones Interpreter desks Software Accessories and Installation Equipment Basic system overview
Systems Integrators, Distributors, Installers, Specifiers, Consultants, Sales and Marketing & End Users
After completing this course, you will be able to: Recognize system hardware and software components Understand system & components features Identify system connectivity Describe a basic system overview Show knowledge on IP Networks and Audio Networks
Prerequisites Duration Location
None 3 hours Online at https://academy.globalteach.com/ST/Catalog.aspx
Online training courses
Communications
Content
Target audience Purpose
Prerequisites Duration Location
RTS Intercom Full Range Training - Professional Level
Intercom basics RTS Intercom Product Portfolio OMNEO Networking - Professional Level (IP
Basics & OMNEO Overview)
RTS Configuration Software Overview
Online Exam Professional Level
Broadcast & Theatre audio engineers + Intercom users
After completing this course, you will be able to: Understand the basic concepts about Intercom system Recognize RTS Intercom product family and its applications Explain OMNEO features and advantages in the audio IP world Recognize basic knowledge on IP Networks and Audio Networks Understand RTS Configuration Software suite key features to setup RTS
Intercom Digital Matrixes Systems
None 2 hours 30 min Online at https://academy.globalteach.com/ST/Catalog.aspx
Communications
Content
DCN-NG Conference System
DCN Conference Solutions without PC Control Single-CCU2 Multi-CCU2 DCN Conference Solutions with PC Control DCN-SWSMV
DCN-SW HD Camera Control Solutions DCN Conference Solutions
third party interface possibilities INTEGRUS Language
Distribution System
Target audience Purpose
Prerequisites Duration Location
Systems Integrators, Distributors, Installers and Consultants
After completing this course, you will be able to: A full understanding of designing, installing and operating DCN Conference
Solutions and First Line Services A basic understanding of designing, installing and operating DCN Conference
Solutions with PC Control A full understanding of designing, installing and operating DCN Conference
Solutions with Camera Control A basic understanding of Open interface (LBB4187), DCB-SWSMD and DCN-SWAPI A full understanding of designing, installing and operation of INTEGRUS Language
Distribution System and First Line Services
None
5 Days
Online at https://academy.globalteach.com/ST/Catalog.aspx
16 | Training Academy
Course Catalog | 17
Online training courses
Fire
Content
Target audience Purpose
Prerequisites Duration Location
FPA 1000 Fire Alarm Control Panel
Product overview SLC Device installation User operations Keypad/command center
programming
Hardware installation Option Bus Device installation Programming basics and shortcuts Browser-based operation and programming
Dealers, Installers, and Service Technicians
After completing this course, you will be able to: Describe the FPA 1000 Fire Alarm Control Panel List key features of the panel Identify appropriate applications for the FPA 1000 Fire Alarm Control Panel Identify various system options and their part numbers
None 4 hours Online at https://academy.globalteach.com/ST/Catalog.aspx
Fire
Content
Target audience Purpose
Prerequisites Duration Location
FPD-7024 Fire Control Panel Professional
Product overview Option Bus Device installation Command center user operation Setting system parameters RPS: setting up hardware RPS: mapping zone outputs
Hardware installation Keypad user operation Local programming Mapping zone outputs RPS: setting system parameters
Dealers, Installers, and Service Technicians
After completing this course, you will be able to: Describe the FPD-7024 Fire Control Panel List key features of the panel Identify appropriate applications for the FPD-7024 Fire Control Panel Identify various system options and their part numbers
None 4.5 hours Online at https://academy.globalteach.com/ST/Catalog.aspx
Online training courses
Fire
Content
Target audience Purpose
Prerequisites Duration Location
Basics of Video Fire Detection
Concept of AVIOTEC Algorithms Limitations
How to find an application for AVIOTEC How to configure AVIOTEC How to set up the camera
System Integrators
After completing this course, you will be able to: Explain what video based fire detection is Understand how the fire and smoke algorithms work Explain under which conditions AVIOTEC does not detect fire or smoke Install and configure AVIOTEC Differentiate between the advantages of AVIOTEC and standard fire detection Decide for which applications AVIOTEC is suitable
None 45 minutes Online at https://academy.globalteach.com/ST/Catalog.aspx
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
18 | Training Academy
Course Catalog | 19
Online training courses
Intrusion
Content
Target audience Purpose
Prerequisites Duration Location CEU Credits
Intrusion
Content
Target audience Purpose
Prerequisites Duration Location
G Series/B Series Professional Training (US/Canada)
G Series/B Series Integrated System Overview Intrusion System Fundamentals
Installers, System Programmers, Service Technicians, Project Managers, Sales After completing this course, you will be able to: Identify the components of an intrusion alarm system Determine which G Series and B Series panel is right for each application, based
on the features and benefits
None 1 hour Online at https://academy.globalteach.com/ST/Catalog.aspx This course may be accredited for CEU credits
B Series Professional Training (US)
Intrusion System Fundamentals B Series Integrated System Overview
Installers, System Programmers, Service Technicians, Project Managers, Sales After completing this course, you will be able to: Identify the components of an intrusion alarm system Determine which B Series panel is right for each application, based on the
features and benefits
None 1 hour Online at https://academy.globalteach.com/ST/Catalog.aspx
Intrusion
Content Target audience Purpose
Prerequisites Duration Location
Intrusion System Fundamentals
Security system basics Dealers, Installers, and Service Technicians After completing this course, you will be able to: Describe what an intrusion alarm system does Identify and understand the components of an intrusion alarm system Identify the best coverage pattern for your space Determine which reporting option is best for your installation
Explain how a system is wired
None
10 minutes
Online at https://academy.globalteach.com/ST/Catalog.aspx
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
20 | Training Academy
Online training courses
Intrusion
Content
Target audience Purpose
Prerequisites Duration Location
Introduction to IP Networking for Intrusion
IP networking information location IP networking connections
Key Terms Communication option
Installers, Programmers, Service Technicians, Sales
After completing this course, you will be able to: Locate and utilize IP network information Install security systems with IP network connections Explain key terms Identify and use network communication options None
20 minutes
Online at https://academy.globalteach.com/ST/Catalog.aspx
Intrusion
Content
Target audience Purpose
Prerequisites Duration Location
G Series/B Series Integrated Intrusion Systems Overview
Bosch Corporate Overview Control Panel Features Peripheral Devices
Integration Options Additional Features
Installers, Programmers, Service Technicians, Sales
After completing this course, you will be able to: Identify the features of Bosch Intrusion Control Panels Choose the correct peripheral devices for your installation Understand system integration options
None 30 minutes
Online at https://academy.globalteach.com/ST/Catalog.aspx
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
Course Catalog | 21
Online training courses
Intrusion
Content Target audience Purpose
Prerequisites Duration Location
Intrusion Detector Fundamentals
Detector Basics Bosch Motion Detector Overview
Motion Detector Selection Bosch Detector Total Cost of Ownership
Installers, Service Technicians, Sales
After completing this course, you will be able to: Identify different types of detectors Differentiate between motion detector technologies and choose the right
technology for your application Understand the Bosch detector portfolio Identify key factors to consider when selecting a motion detector Estimate your Return on Investment for Bosch Motion Detectors
None
2.5 hours
Online at https://academy.globalteach.com/ST/Catalog.aspx
Intrusion
Content Target audience Purpose
Prerequisites Duration Location
G Series/B Series Installation
Connecting system components
Wiring system components
Installers, Service Technicians, Sales
After completing this course, you will be able to: Identify system components Wire and connect components to the control panel Mount enclosure and install the control panel
None 30 minutes Online at https://academy.globalteach.com/ST/Catalog.aspx
Intrusion
Content Target audience Purpose
Prerequisites Duration Location
B Series Installation
Wiring system components
Connecting system components
Installers, Service Technicians
After completing this course, you will be able to: Identify system components Wire and connect components to the control panel Mount enclosure and install the control pane
None 30 minutes Online at https://academy.globalteach.com/ST/Catalog.aspx
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
22 | Training Academy
Online training courses
Intrusion
Content
Target audience Purpose
Prerequisites Duration Location
Introduction to RPS Programming
Installation Keypad programming Firmware upgrade
Installers, Service Technicians
After completing this course, you will be able to: Install the latest version of RPS Identify keypad programming options Program system points in RPS Upgrade firmware None
40 mins
Online at https://academy.globalteach.com/ST/Catalog.aspx
Intrusion
Content Target audience Purpose
Prerequisites Duration Location
Advanced RPS Programming
This course reviews additional RPS programming functions
Programmers, Service Technicians
After completing this course, you will be able to: Configure communications for reporting and notifications Assign keypads to areas and configure keypad functions Enable and configure duress alarms Create custom functions Configure points for RADION devices Use virtual points Use Bosch IP cameras as inputs and outputs Introduction to RPS Programming
1 hour
Online at https://academy.globalteach.com/ST/Catalog.aspx
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
Course Catalog | 23
Online training courses
Intrusion
Content
Target audience
Purpose
Prerequisites Duration Location
Intrusion and IP Camera Integration
Benefits of using Bosch IP cameras with G Series and B Series Control panels How to set up your system using MOTION +
Installers, Engineers, System Integrators, and Commercial Professionals that work with Bosch Integrated Intrusion Control Panels
After completing this course, you will be able to Identify the benefits of using Bosch IP cameras with G Series & B Series Control Panels Configure the control panel and Bosch IP cameras to work together, using MOTION+
None 40 minutes
Online at https://academy.globalteach.com/ST/Catalog.aspx
Intrusion
Content
Target audience Purpose
Prerequisites Duration Location
Cellular for Intrusion Systems (US)
Installer Services Portal Module options Installation
Web Services setup Activation Invoicing
Installers, Service Technicians
After completing this course, you will be able to: Sign up for cellular service Choose the correct cellular module Install the cellular module Set up web services and activate CDMA Configure primary path for cellular in RPS Understand the invoice
None
20 mins
Online at https://academy.globalteach.com/ST/Catalog.aspx
Online training courses
Intrusion
Content
Target audience Purpose
Prerequisites Duration Location
Cellular for Canada
Installer Services Portal Module options Installation
Web Services setup Activation Invoicing
Installers, Programmers, Service Technicians
After completing this course, you will be able to: Sign up for cellular service Choose the correct cellular module Install the cellular module Set up web services and activate CDMA Configure primary path for cellular in RPS Understand the invoice
None
20 mins
Online at https://academy.globalteach.com/ST/Catalog.aspx
Intrusion
Content
Target audience Purpose
Prerequisites Duration Location
Introduction to Remote Connect
Cloud Panel Setup Remote Security Control Build a Remote Access Profile Installers, Programmers, Service Technicians After completing this course, you will be able to: Build a Remote Access Profile Navigate the Remote Security Control App
None
6 minutes
Online at https://academy.globalteach.com/ST/Catalog.aspx
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
24 | Training Academy
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
Course Catalog | 25
Online training courses
Intrusion
Content
Target audience Purpose
Prerequisites Duration Location
Introduction to Z-Wave Home Control Services
Sign up and Get Started with Bosch Service Portal RPS and Webpage / LAN Configuration Dashboard and App Navigation
Programmers and sales
After completing this course, you will be able to: Understand Bosch's Z-Wave Home Control services
Add a Device Add a Scene Customize Modes
None 15 minutes
Online at https://academy.globalteach.com/ST/Catalog.aspx
Intrusion
Content Target audience Purpose
Prerequisites Duration Location
Intrusion
Content Target audience Purpose
Prerequisites Duration Location
B465 Dual Path Communicator: Installation and Programming
This course will familiarize you with the B465 Dual Path Communicator options, setup, and installation. Installers, Programmers, Service Technicians After completing this course, you will be able to: Understand the capabilities of the B465 module Install the B465 module Upgrade the firmware of the B465 module Program the B465 module None 15 minutes
Online at https://academy.globalteach.com/ST/Catalog.aspx
Conettix Receiver Setup
This course teaches basic configuration for a Conettix receiver via a series of videos.
Installers, Programmers, Service Technicians After completing this course, you will be able to: Download and install software Configure network Assign IP address Set up receiver Connect to automation Configure communication Set up and manage accounts Introduction to RPS Programming 20 mins
Online at https://academy.globalteach.com/ST/Catalog.aspx
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
26 | Training Academy
Online training courses
Intrusion
Content
Target audience Purpose
Prerequisites Duration Location
ISC-SK10 Shock Sensor
This course provides an introduction to the ISC-SK10 Shock Sensor via a recorded webinar
Installers, Service Technicians, Sales After completing this course, you will be able to: Identify appropriate applications for use of the ISC-SK10 Shock Sensor Identify the types of attacks the sensor can detect Recognize installation considerations None
15 minutes
Online at https://academy.globalteach.com/ST/Catalog.aspx
Intrusion
Content
Target audience Purpose
Prerequisites Duration Location
GV4 Overview
This course includes the following items Intrusion System Fundamentals (online) Bosch GV4 Basics (online) Bosch GV4 Hardware (online) Introduction to RPS Software (online) Advanced RPS Programming (online) Bosch GV4 Troubleshooting (online) Bosch ZONEX Devices (online) GV4 Assessment (online)
Installers, Programmers, Service Technicians
After completing this course, you will be able to: Configure devices and program the control panel according to the needs of a customer Use Bosch's Remote Programming Software (RPS) to program control panel parameters Troubleshoot potential configuration issues
None
3 hours, 20 minutes
Online at https://academy.globalteach.com/ST/Catalog.aspx
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
Course Catalog | 27
Online training courses
Intrusion
Content
Target audience Purpose Prerequisites Duration Location
B940W Slim Touch Keypad Product Introduction Training
This course includes the following items Product information Technical specifications Characteristics How to videos Installers, System Programmers, Service Technicians, Project Managers, Sales
Learn the commercial and technical characteristics of the new B940W Slim touch keypad None
20 minutes
Online at https://academy.globalteach.com/ST/Catalog.aspx
Intrusion
Content
Target audience Purpose Prerequisites Duration Location
G Series/B Series Expert Recertification
Introduction Resources Terminology End of Life Products Firmware updates New RPS Features
New Products B444-A Plug-in cellular module introduction training B940W Slim touch keypad product introduction
training RADION Wireless Devices: Portfolio Expansion Assessment
Installers, System Programmers, Service Technicians
Completion of this training will renew the G Series/B Series Expert certification for 2 years
G Series/B Series Expert Certification 2 hours Online at https://academy.globalteach.com/ST/Catalog.aspx
Intrusion
Content
Target audience Purpose Prerequisites Duration Location
G Series/B Series Master Recertification
Introduction Resources Terminology End of Life Products Firmware updates New RPS Features
New Products B444-A Plug-in cellular module introduction training B940W Slim touch keypad product introduction
training RADION Wireless Devices: Portfolio Expansion Assessment
Installers, System Programmers, Service Technicians
Completion of this training will renew the G Series Master certification for 2 years G Series Master Certification 2 hours Online at https://academy.globalteach.com/ST/Catalog.aspx
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
28 | Training Academy
Online training courses
Video Solutions
Content
Target audience Purpose Prerequisites Duration Location
Bosch Video Systems Professional Certification (commercial)
This training plan is composed of 14 modules 1.Startup instruction 2.Introduction 3.Quality and Trust 4.Easy installation 5.Leading solutions 6.Video Analytics 7.In_Store Analytics 8.Business Intelligence 9.Shaping the future 10.Fixed camera portfolio 11.Thermal camera portfolio 12.Moving camera portfolio 13.Recorder portfolio 14.End of training
Commercial people, installers, system designers and distributors
This training will explain the Bosch philosophy and the technologies behind our products. We will guide you trough our different solutions and products that have been created for your needs.
None
2 hour
Online at https://academy.globalteach.com/ST/Catalog.aspx
Video Solutions
Content Target audience Purpose
Prerequisites Duration Location
Bosch IP Basics for Video Solutions
IP video basics Basic configuration of IP devices
Dealers, Installers, and Service Technicians
After completing this course, you will be able to: Identify main components of IP video surveillance systems Describe the major differences between SD, HD, and MP cameras List cameras from the Bosch Common Product Platform portfolio and their features Describe how to obtain firmware and software updates for Bosch encoders and IP cameras Identify Configuration Manager and Configuration Wizard and describe differences Password-protect the Configuration Manager application Perform network discovery, assign valid IP addresses, verify live video feed, name
devices, and set date and time of network encoders Determine firmware version and update, if necessary
None
1.5 hours
Online at https://academy.globalteach.com/ST/Catalog.aspx
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
Course Catalog | 29
Online training courses
Video Solutions
Content
Target audience Purpose
Prerequisites Duration Location
IP Camera Essentials
IP Camera elements Video encoding Technologies
IP camera fixed portfolio IP camera moving portfolio Common product platform
Dealers, Installers, Service Technicians, Commercial sales members
After completing this course, you will be able to: Understand basic training on IP Camera Essential, see content for more
Bosch Video Systems Professional Training (commercial) 1.75 hours
Online at https://academy.globalteach.com/ST/Catalog.aspx
Video Solutions
Content
Target audience Purpose
Prerequisites Duration Location
Bosch Video Systems Expert Certification (system design)
History of C.C.T.V Camera fundamentals Recording fundamentals Project design fundamentals
Video analytics, designing solutions Bosch Video Systems Expert quiz (available without
prerequisite with a maximum of 2 attempts)
Commercial people, installers, system designers and distributors
After completing this course, you will be able to: Understand the Bosch video and camera system design
Bosch Video Systems Professional Certification (commercial) 4 hours
Online at https://academy.globalteach.com/ST/Catalog.aspx
Video Solutions
Content
Target audience Purpose
Prerequisites Duration Location
Video Analytics Technical Certification Training
Bosch video analytics at the edge Essentials and intelligent video analytics Essentials and intelligent video analytics
advanced configuration
Flow configuration Forensic search Application Design
Dealers, Installers, Service Technicians, Commercial sales members
After completing this course, you will be able to: Complete after taking the IP Camera Essentials
None
2 hours
Online at https://academy.globalteach.com/ST/Catalog.aspx
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
30 | Training Academy
Online training courses
Video Solutions
Content
Target audience Purpose
Prerequisites Duration Location
Bosch License Plate Capture
License plate capture and recognition Product portfolio and technical specifications Installing license plate capture cameras and recognition systemsn
Dealers, Installers, and Service Technicians
After completing this course, you will be able to: Describe license plate capture and recognition technologies Explain difference between standard cameras and license plate capture cameras Identify features of license plate capture cameras Identify and describe considerations for installation Describe proper integration with license plate recognition
None
1 hour
Online at https://academy.globalteach.com/ST/Catalog.aspx
Video Solutions
Content
Target audience Purpose
Prerequisites Duration Location
IP Recording Essentials
IP Recording Fundamentals IP Recording Portfolio Local and cloud storage recording
DIVAR IP 5000 DIVAR IP 3000/7000 DIVAR IP 6000
Dealers, Installers, Service Technicians, Commercial sales members
After completing this course, you will be able to: Know basic training on IP Recording Essentials, see content for more information
IP Camera Essentials Training 1.75 hours
Online at https://academy.globalteach.com/ST/Catalog.aspx
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
Course Catalog | 31
Online training courses
Video Solutions
Content
Target audience Purpose Prerequisites Duration Location CEU Credits
BVMS Professional Level Online Training Plan: Technical Focus
Fixed camera portfolio Moving camera portfolio Thermal camera portfolio Recorder portfolio Video Analytics IP Networking Basics BVMS Essentials - Module 1: Main system
components (Web based Training with voice)
BVMS Essentials - Module 2: Basic interaction between system components (Web based Training with voice)
BVMS Essentials - Module 3: Additional system components (Web based Training with voice)
BVMS Essentials - Module 4: Base licenses of the BVMS product family (Web based Training with artificial voice)
System engineers, administrators and installers To better understand the basics of networking, IP Basics, BVMS components, and the how the BVMS system components work together.
None 3 hours Online at https://academy.globalteach.com/ST/Catalog.aspx This course may be accredited for CEU credits
Video Solutions
Content Target audience Purpose
Prerequisites Duration Location
BVMS Operator Client
Operator Client overview and login instructions Alarm management and keyboard operations
Live and Playback functionality Video search and export
Dealers, Installers, and Service Technicians
After completing this course, you will be able to: 1. Understand the basics and features of Operator Client 2. How to perform Live and Playback functions to include exports 3. How to navigate Alarm features and notifications 4. Keyboard operations and movements
None
2.5 hours
Online at https://academy.globalteach.com/ST/Catalog.aspx
Online training courses
Video Solutions
Content Target audience Purpose
Prerequisites Duration Location
DIVAR IP 2000 and 6000 Appliances
Product overview Installation and basic setup Maintenance and repair
Hardware and software Basic VRM configuration
Technicians, Project Managers, IT Professionals, and Sales
After completing this course, you will be able to: Describe the DIVAR IP 2000 and 6000 storage appliances Identify hardware and software specifications for the DIVAR IP 2000 and 6000 Describe the installation process Identify the basic configuration process Add and configure system components using Configuration Manager Configure recording preferences, modes, profiles and schedules Use BVMS to check live playback Use VRM Monitor for maintenance and troubleshooting Identify the field-replaceable parts for the DIVAR IP 2000 and 6000 Describe how to perform maintenance or replacement for those parts
None
3 hours
Online at https://academy.globalteach.com/ST/Catalog.aspx
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
32 | Training Academy
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
Course Catalog | 33
Online training courses
Video Solutions
Content Target audience Purpose
Prerequisites Duration Location
DIVAR IP 3000 and 7000 Appliances
Product overview Basic configuration
Technical specifications and installation Maintenance and repair
Dealers, Installers, and Service Technicians
After completing this course, you will be able to: Describe the DIVAR IP 3000 and 7000 storage appliances Identify hardware and software specifications for the DIVAR IP 3000 and 7000 Describe the mounting and installation options Identify basic configuration for the DIVAR IP 3000 and 7000 Identify the field-replaceable parts for the DIVAR IP 3000 and 7000 Describe how to perform maintenance or replacement for those parts Describe the process for reimaging the system
None
3 hours
Online at https://academy.globalteach.com/ST/Catalog.aspx
Video Solutions
Content
Target audience Purpose
Prerequisites Duration Location
Network Basics
IP Addressing and Subnetting Open System Interconnection
(OSI) model
Topologies and cabling Network troubleshooting commands Ports and selection of network switches
Technicians, Project Managers, IT Professionals, and Sales
After completing this course, you will be able to: Describe IP addressing fundamentals Describe various network topologies and transmission mediums Discuss the OSI model Troubleshoot ports and interface problems Describe how to select network switches
None
1.5 hours
Online at https://academy.globalteach.com/ST/Catalog.aspx
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
34 | Training Academy
Classroom training courses
Access Control
Content
Target audience Purpose
Prerequisites
Duration Course fee Location
Access Control Systems - Access Professional Edition (APE)
Adding AMCs Creating Entrances Configuring I/Os Adding schedules
Assigning permissions Creating card holders Monitoring system
Installers, Integrators and Project Managers utilizing the APE system
After completing this course, you will be able to: Program the Bosch APE access control panel to meet customer criteria for their card
access needs
IP Networking Basics (Web Based Training) Access Modular Controller (AMC) Overall Test for all AMC modules Access Control Readers and Credentials
2 days
Classroom:- $345, Virtual - $300
Any Bosch Training Facility
Access
Content
Target audience Purpose Prerequisites
Duration Location Course Fee
Access Management Systems (AMS) Expert Level trainings and exams
Fundamentals of Access Management System Software
Basic programming of the AMC2 Controller
Installation of AMS in Server-Client architecture
Door Models Setting up door and reader parameters Working in MapView Working with the Badge Designer
application
PIN code types in AMS Time Models Random Screening Blocking and Blacklisting Reports Use of the web-based cardholder data
import/export tool Backup and Restore Licensing
Installers, Project Engineers and Technical support companies
After completing this Course, you will be able to work with and set up an access control system based on Bosch AMC hardware and Access Management System Software.
Basic network knowledge Beneficial if you already have some experience in access control systems,
installation and configuration. IP Networking Basics Online Training Readers and Credentials Online Training and its exam AMC Product Portfolio Online Training series and the AMC Exam
2 Days Any Bosch Training Facility $345
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
**Bosch Security and Safety Systems has submitted the course outline to InfoComm for credit evaluation. Credits earned will be printed on the certificate of completion for the course.
Course Catalog | 35
Classroom training courses
Access
Content
Target audience Purpose
Prerequisites Duration Location Course Fee
Access Control Systems - Access Management System (AMS) Master Training
Installation of AMS Server, Client and Mapview
Configuring AMS Door Models Badge Designer FP Reader configuration (if there is
FP reader, then we will do it life as well, otherwise PPT) PIN Codes Configurable data fields Time- and Day Models
Mapview (configuring, working with Mapview, implement changes in Mapview, Swipe ticker)
Connect to BVMS (configuring BVMS for it, configuring AMS for it, working with this connection)
Threat Level Management Backup/Restore Licensing Basic troubleshooting Test
Installers, Project Engineers and Technical support companies
Upon successful completion of an AMS Master Level Training and its online Exam, beyond the gathered knowledge and skills at Expert Level, you will be able to:
Configure and use the compatible Fingerprint Reader Configure and work with the advanced features of AMS Configure the Threat Level Management and help your customer to find out appropriate
Threat Level Scenarios Configure and operate your AMS with multiple MACs Offer and configure the feature "Divisions" to projects Establish and configure the connection between AMS and Bosch Video Management
System Connect the Bosch B/G Series Intrusion panels to AMS Work with the Elevator Door Model Importing and Exporting Cardholder data with the web-based Import/Export Tool
Access Control Systems Access Management Systems (AMS) Expert Level trainings and exams
2 Days
Any Bosch training facility or private trainings which are offered by request only
$445
Classroom training courses
Communications
Content
Target audience Purpose
Prerequisites No. of participants Duration Location CEU credits** Course fee
Conferencing DCN -- Next Generation
System Technology System Design Installing and Operating
Product Technology Exercise
Participants new in DCN Next Generation Multi-CCU system
After completing this course, you will be able to: Identify the capabilities and differences of Bosch Conference systems Identify and setup the different types of Conference Control Units Identify proper device installation and wiring practices Install and configure DCNM software
None
Minimum of 3
Facility Dependent
2 days
Burnsville, MN 10.0 RUs $595
36 | Training Academy
**Bosch Security and Safety Systems has submitted the course outline to InfoComm for credit evaluation. Credits earned will be printed on the certificate of completion for the course.
Course Catalog | 37
Classroom training courses
Communications
Content
Target audience Purpose
Prerequisites No. of participants Duration Location CEU credits** Course fee
Telex Radio Dispatch Certification Training
Review of networking terms, protocols, architecture, and security
Review of networking requirements and considerations for TELEX Radio Dispatch systems Introduction to IP224
Review design and layout considerations for C-Soft dispatch screens
Review system design considerations and best practices
Hands on system programming, hardware configuration and setup
Hands on system troubleshooting Practical Exam Master Level
Sales engineers & systems technicians
After completing this course, you will be able to: Setup an RoIP network including application and use case considerations Demonstrate an understanding of direct IP interfaces for P25 DFSI/CSSI, NEXEDGE, and
DMR/AIS along with encryption options Demonstrate an understanding of control station interfaces including supported
radios,features, and signaling Demonstrate radio gateway modes of operation (local, console, tone and crosspatch) Demonstrate management of hardware devices, including firmware upgrades, using Telex
System Manager (TSM) Correctly setup radio gateway(s) and audio interfaces Correctly identify requirements, install, and license C-Soft including options Correctly design and program a C-Soft based system including the SIP interface Correctly align and test a dispatch system using Telex hardware and software Demonstrate knowledge of radio system troubleshooting including IP network and C-Soft
programming
None
Minimum of 3
Maximum of 6
2.5 days Any Bosch Training Facility
9.0 RUs $595 at Bosch Facility, $895 at other location, $150 for recertification
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
**Bosch Security and Safety Systems has submitted the course outline to InfoComm for credit evaluation. Credits earned will be printed on the certificate of completion for the course.
38 | Training Academy
Classroom training courses
Communications
Content
Target audience Purpose Prerequisites
No. of participants Duration Location CEU credits** Course fee
Praesideo
Introduction to Praesideo System components Software: Installation and updates Configuration System bus powering MCI/BAM
Network basics and architecture PC connections Recording and setting messages Power consumption PC Call Station CobraNet basics and configuration
AV Dealers, AV Integrators, Engineers, Consultants
After completing this course, you will be able to: Design and program a Praesideo system
Public Address: 70V Audio and Business Music Pro Audio: Networking Basics Pro Audio: OMNEO IP Basics Pro Audio: OMNEO Selling Pro Audio: Praesideo Basics #1: System Components Overview (Online Courses)
Minimum of 3
Maximum of 6
3 days Burnsville, MN and Ontario, CA Training Facilities 12.5 InfoComm RUs $595
Communications
Content
Target audience Purpose
Prerequisites No. of participants Duration Location Course fee
RTS Intercom Full Range Training - Master Level
Hands on different RTS Intercom Matrices
RTS Intercom Keypanels IPEdit and AZEdit setup on live systems ADAM and ADAM-M cards Port Allocation RTS Trunking
RTS Intercom Accessories Integration with third party system Commercial Sales Training:
o RTS Intercom System differentiators o How to beat competition o RTS Intercom Innovations and opportunities
Sales engineers & systems technicians
After completing this course, you will be able to: Commissioning of Full Range RTS Intercom Systems Show RTS Intercom system integration with third party systems Understand different system sizes and complexities Describe RTS Intercom system positioning in the market
RTS Intercom - Expert Level Certificate (Online)
Participants based on location
2 days Any Bosch Training Facility $445
Course Catalog | 39
Classroom training courses
Communications
Content
Target audience Purpose
Prerequisites No. of participants Duration Location Course fee
Electro-Voice & Dynacord Live Sound Partner Master Level
Electro-Voice and Dynacord Live Sound system setup and configuration Electro-Voice and Dynacord Live Sound system tuning Electro-Voice and Dynacord Live Sound advanced system operation Electro-Voice and Dynacord Live Sound system examples Electro-Voice and Dynacord Live Sound system troubleshooting Live Sound Partners, Sound engineers & system technicians
After completing this course, you will be able to: Commission an Electro-Voice and Dynacord Live Sound system Show how to troubleshoot an Electro-Voice and Dynacord Live Sound system Recognize the particularities and characteristics of Live Sound systems Explain the best practices to setup and configure a Live Sound system Understand the importance and complexity of tuning Live Sound systems
Live Sound Training Expert Level Certificate (Online)
Participants based on location
2 days
Any Bosch Training Facility
$645
Communications
Content
Target audience Purpose
Prerequisites No. of participants Duration Location Course fee
Electro-Voice & Dynacord Install Partner Master Level
Electro-Voice and Dynacord system design and examples Electro-Voice and Dynacord advanced system operation Electro-Voice and Dynacord system programing and configuration Electro-Voice and Dynacord system commissioning and tuning Install Partners, Sales engineers & system technicians After completing this course, you will be able to: Design a Electro-Voice and Dynacord fixed installed system Understand the importance and complexity of tuning fixed installation systems Show the best practices to program and configure a fixed installation system Determine the best practices for commissioning a installed system
Install Partner Training Expert Level Certificate (Online)
Participants based on location
3 days
Any Bosch Training Facility $645
40 | Training Academy
Classroom training courses
Fire
Content Target audience Purpose
Prerequisites
No. of participants Duration
FPD-7024 Expert
FACU fundamentals RPS 7024 overview Installation FPD-7024 Planning of Wiring and Installation of field devices Keypads, LED / Visual Notification, and annunciators
Onboard inputs and outputs Option bus devices System operation Control Panel Programming Troubleshooting
After completing this course, you will be able to: Install and mount a FPD-7024 FACP, provide initial primary and secondary power, and
connect remote programming to the panel. Explain function and benefits of D7039 MUX module; demonstrate how to add a D7039
MUX Module to the system, and explain how the onboard keypad responds to this action Define number of onboard Notification Appliance Circuits and their individual and
combined amperage capacity Explain the battery/NAC test, including how long the battery is tested Differentiate between Zone Input and Addressable Point testing; describe the five
options available in Addressable Point testing. Demonstrate the necessary steps for keypad programming a daily test report to be sent
at a specified time
FPD-7024 Professional Bosch G Series Expert Level training strongly recommended Bosch G Series Professional level training recommended Conettix IP course recommended if FPD-7024 FACPs are to be connected to a D6600
or a D6100 Receiver
Participants based on location
Virtual: Maximum of 4
Classroom - 2 days, Virtual - 2 days
Location CEU credits Course fee
Intrusion
Content
Target audience Purpose
Prerequisites No. of participants Duration Location Course fee
Any Bosch training facility, virtually, or private trainings which are offered by request only This course may be accredited for CEU credits Classroom - $345, Virtual - $300
B Series Expert Certification (US)
Introduction to IP Networking for Intrusion (online)
B Series Installation (online) Introduction to RPS Programming (online) Cellular for Intrusion Systems (US)(online)
Intrusion and IP Camera Integration (online) Introduction to Z-Wave Home Control (online) B Series Expert Certification (classroom) Certification Exam (online)
Distributors, Installers, System Programmers, Service Technicians
After completing this course, you will be able to: Configure devices and program the control panel according to the needs of a customer User Bosch's Remote Programming Software (RPS) to program control panel parameters Troubleshoot potential configuration issues
B Series Professional Training (US)
Minimum of 3
Online pre-work 2.5 hours / Classroom 2 days / Virtual 2 days Any Bosch Training Facility Classroom: $345 Virtual: $300
Course Catalog | 41
Classroom training courses
Intrusion
Content
Target audience Purpose
Prerequisites No. of participants Duration Location Course fee CEU Credits
G Series/B Series Expert Certification (US)
Introduction to IP Networking for Intrusion (online)
G Series Installation (online) Introduction to RPS Programming (online) Cellular for Intrusion Systems (online)
Intrusion and IP Camera Integration (online) Introduction to Z-Wave Home Control (online) G Series/B Series Expert Certification
(classroom) Certification Exam (online
Installers, System Programmers, Service Technicians
After completing this course, you will be able to: Configure devices and program the control panel according to the needs of a customer User Bosch's Remote Programming Software (RPS) to program control panel parameters Troubleshoot potential configuration issues
G Series/B Series Professional Training (US/Canada)
Participants based on location
Virtual: Maximum of 4
Online pre-work 2.5 hours / Classroom 2 days / Virtual - 2 days Any Bosch training facility, virtually, or private trainings which are offered by request only $345 per person, $1800 per day, $1200 virtual private (both days) This course may be accredited for CEU credits
Intrusion
Content
Target audience Purpose
Prerequisites Duration Location Course fee
G Series/B Series Expert Certification (Canada)
Intrusion IP Networking Basics (online) G Series/B Series Installation (online) RPS Programming (online) Cellular for Intrusion Systems (Canada)
(online)
Intrusion and IP Camera Integration (online) G Series/B Series Expert Certification
(classroom) Certification Exam (online
Installers, System Programmers, Service Technicians
After completing this course, you will be able to: Configure devices and program the control panel according to the needs of a customer User Bosch's Remote Programming Software (RPS) to program control panel parameters Troubleshoot potential configuration issues
G Series/B Series Professional Training (US/Canada)
Online pre-work 2.5 hours / Classroom training 2 days / Virtual 2 days
Virtually or private trainings by request
Classroom: $345 Virtual: $300
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
42 | Training Academy
Classroom training courses
Intrusion
Content
Target audience Purpose
Prerequisites No. of participants Duration Location Course fee
G Series Master Certification (US)
Advanced Programming (online) Conettix Receiver Setup (online)
G Series Master Certification (classroom) Practical Exam (classroom)
System Programmers, Service Technicians
After completing this course, you will be able to: Program control panels for multiple applications, including banking, retail and warehouses Use Bosch's Remote Programming Software (RPS) to program advanced functions Integrate Bosch IP Cameras as inputs and outputs in the system
G Series/B Series Expert Certification (US)
Minimum of 3
Maximum: Participants based on location
Online pre-work 3.5 hours / Classroom 3 days Bosch Training Facilities Free in Bosch Training Center, private training fee may apply
Video Solutions
Content
Target audience Purpose
Prerequisites No. of participants Duration Location Course fee
Bosch Video Management System Expert with NetApp Certification
Encoder/camera technical overview VRM fundamentals Device configurations and logical tree MVS and Operator Client Adding VRM and storage NetApp installation and support
BVMS technical overview and licensing Schedules and camera configurations, alarms
and events, users and groups VRM technical overview E-Series overview NetApp Santricity Simulator and Log Collection
Support, Installation, and Design Staff utilizing Enterprise Video Storage (NetApp): School Districts, College or Corporate Campus, Government Complex, Technicians, Project Managers and IT Professionals
After completing this course, you will be able to: Describe Bosch Video over IP (BVIP) equipment Define basic encoder, alarm and system configurations and capabilities Describe how to design, implement and install Describe BVMS System Architecture and equipment Install and configure BVMS from an administrative standpoint Install and configure VRM within BVMS Install and configure NetApp storage in a BVMS environment
Network Basics Online Course Bosch IP Basics Online Course Bosch VMS Operator Client Training Online Course
Minimum of 3
Maximum: depends on location
3 days Offered by request only $495
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
Course Catalog | 43
Classroom training courses
Video Solutions
Content
Target audience Purpose
Prerequisites No. of participants
Bosch Video Management System Expert with Appliance Storage Certification
Encoder and camera technical overview VRM fundamentals BVMS licensing Schedules and camera configurations,
alarms and events, users and groups VRM technical overview
BVMS technical overview DIVAR IP appliance overview Device configurations and logical tree MVS and Operator Client Adding VRM and storage RAID basics
Technicians, Project Managers and IT Professionals utilizing DIVAR IP Storage
After completing this course, you will be able to: Describe Bosch Video over IP (BVIP) Equipment Define basic encoder configurations and capabilities Describe how to design, implement and install Describe BVMS system architecture and equipment Define basic system configurations Install and configure BVMS from an administrative standpoint Perform basic alarm configurations Install and configure VRM within BVMS Install and configure DIVAR IP storage in a BVMS environment
01 BVMS Professional Certification
Participants based on location
Virtual: Maximum of 4
Duration Location CEU Credts Course fee
3 days Any Bosch training facility, virtually, or private trainings which are offered by request only This course may be accredited for CEU credits $595
Video Solutions
Content
Target audience Purpose
Prerequisites No. of participants Duration Location Course fee
Bosch Video Management System Master Certification
Advanced VRM and system design Panel and ONVIF device integration
and configuration
Remote network connectivity and configuration Wireless fundamentals Advanced troubleshooting
System Engineers, System Administrators, Installers, Project Managers, and System Architects
After completing this course, you will be able to: Explain the functionality of the BVMS additional components Understand and configure advanced BVMS features and deployment options Understand the purpose of the following topics in relation to BVMS:
· Scripting (BVMS SDKs) · Automatic network replenishment (ANR)
BVMS Expert Certification
Participants based on location
4 days
Any Bosch Training Facility
$595/person
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
44 | Training Academy
Classroom training courses
Video Solutions
Content
Target audience Purpose
Prerequisites
No. of participants
Duration Location Course fee
Bosch Video Essentials Master Certification
Classroom course, online courses for the single system configuration, all in one system configuration, video analytics configuration.
Installers, system designers and distributors After completing this course, you will be able to: Understand the Bosch video and camera product lines
Bosch Video Systems Professional Certification (commercial) Bosch Video Systems Expert Certification (system design)
Participants based on location Virtual: Maximum of 4
Classroom training 3 days / Online post-work 3 hours Any Bosch training facility, virtually, or private trainings which are offered by request only $645
Video Solutions
Content
Target audience Purpose
Prerequisites No. of participants Duration Location Course fee
DIVAR 1 Day Overview
The DIVAR 1 Day Overview class is a guided instructional course focused on the setup and deployment of the DIVAR IP System.. This is an expert level class and does not provide a certification. Participants new with the Bosch Video Management System After attending the overview session, students will understand the: Setup procedure Basic installation tips for deployment Remote Connectivity setups 01 BVMS Professional Certification Participants based on location
1 day
Private requests only -- Can be hosted at any public facility or company facility $195
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
Course Catalog | 45
Classroom training courses
Video Solutions
Content
Target audience Purpose
Prerequisites No. of participants Duration Location Course fee
Cyber (Data) Security Technical Certification
State of Cyber Security and Cyber Warfare today Incident Response Procedures and Law Enforcement Digital Evidence and IP Video
Vulnerability analysis vs Pen Testing Tools used and practical application Nexpose and NMAP Labs LINUX Based cameras vs Closed OS (BOSCH)
Wireshark and validation testing Hashing and Encryption Lab IP Camera Hardening Procedures Storage Harding and Lock Down Procedures Working with Certificates Bosch Built In Firewalls Working with Servers Standalone and Domain Technicians, Project Managers and IT Professionals
After completing this course, you will be able to: Analyze and secure IP video systems Know the differences between vulnerability assessments and penetration testing Leverage scan information in order to reduce attack surfaces of system devices Data Security @ Bosch online module Basic Cyber Fundamentals online module Data Security Expert online module How to use Certificates online module Intermediate networking knowledge Participants based on location Virtual: Maximum of 4 Classroom - 2 days, Virtual - 3 days
Any Bosch Training Facility
$445
*The course outline, certificate and the number of hours required to complete the course may be submitted to your state licensure or affiliated accreditation organization to obtain CEU credits for this course.
46 | Training Academy
A Tradition of Quality and Innovation For over 125 years, the Bosch name stands for quality and reliability. Bosch is the global supplier of choice for innovative technology, backed by the highest standards for service and support. Bosch Security and Safety Systems proudly offers a wide range of security, safety, communications and sound solutions that are relied upon every day in applications around the world, from government facilities and public venues to businesses, schools and homes.
Bosch Security and Safety Systems 130 Perinton Parkway Fairport, NY 14450 USA Phone: 800.289.0096 Fax: 585.223.9180 © Bosch Security Systems, Inc. 2018 Modifications Reserved Printed in the US BTACC_Training-Courses_v20180420
Course Catalog | 47
Adobe PDF Library 15.0 Adobe InDesign CC 13.1 (Windows)