Shelly Door/Window 2 User Guide
Wi-Fi Door/Window Sensor
The Shelly Door/Window by Allterco Robotics is designed to be placed on a door or window to detect open/close states, incline of opening, and vibration alerts*. It is battery-powered with a battery life of up to 2 years. The Shelly Door/Window can function as a standalone device or as an accessory to a home automation controller.
* Some features will be available after a firmware update of the device.
Specifications
Power Supply: 2x 3V CR123A Batteries
Battery life: 2 years
Complies with EU standards:
- RE Directive 2014/53/EU
- LVD 2014/35/EU
- EMC 2004/108/WE
- RoHS2 2011/65/UE
Working temperature: -10 ÷ 50°C
Temperature meas. range: -10°C ÷ 50 °C (± 1°C)
Radio signal power: 1mW
Radio protocol: WiFi 802.11 b/g/n
Frequency: 2400-2500 MHz
Operational range (depending on local construction):
- up to 50 m outdoors
- up to 30 m indoors
Dimensions:
- Sensor: 82x23x20mm
- Magnet: 52x16x13mm
Electrical consumption:
- Static current: ≤10 μΑ
- Alarm current: ≤60 mA
Installation Instructions
CAUTION! Before beginning the installation, please read the accompanying documentation carefully and completely. Failure to follow recommended procedures could lead to malfunction, danger to your life, or violation of the law. Allterco Robotics is not responsible for any loss or damage in case of incorrect installation or operation of this device.
CAUTION! Use the Device only with batteries which comply with all applicable regulations. Inappropriate batteries may cause a short circuit in the Device, which may damage it.
CAUTION! Do not allow children to play with the device, especially with the Power Button. Keep the devices for remote control of Shelly (mobile phones, tablets, PCs) away from children.
Control your home with your voice
All Shelly devices are compatible with Amazon Alexa and Google Assistant. Please see our step-by-step guides on:
Device "Wake Up"
To wake up the device, remove the back cover. Press the Button. The LED should flash slowly, indicating that Shelly is in AP mode. Press the Button again to turn off the LED and put Shelly into "sleep" mode.
Factory Reset
You can return your Shelly D/W sensor to its Factory Settings by pressing and holding the Button for 10 seconds. Upon successful factory reset, the LED will flash slowly.
Additional Features
Shelly allows control via HTTP from any other device, home automation controller, mobile app, or server. For more information about the REST control protocol, please visit: www.shelly.cloud or send a request to developers@shelly.cloud.
Mobile Application for Shelly
Shelly Cloud gives you the opportunity to control and adjust all Shelly devices from anywhere in the world. The only thing you need is a connection to the Internet and our mobile application, installed on your smartphone or tablet. To install the application, please visit Google Play or App Store.
Registration: The first time you open the Shelly Cloud mobile app, you have to create an account which can manage all your Shelly devices.
Forgotten Password: In case you forget or lose your password, just enter the e-mail address you have used in your registration. You will then receive instructions on how to change your password.
WARNING! Be careful when you type your e-mail address during the registration, as it will be used in case you forget your password.
After registering, create your first room (or rooms), where you are going to add and use your Shelly devices. Shelly Cloud allows easy control and monitoring using a mobile phone, tablet, or PC.
Device Inclusion
To add a new Shelly device, connect it to the power grid following the Installation Instructions included with the Device.
Step 1
Place your Shelly D/W sensor in the room where you want to use it. Press the Button - the LED should turn on and flash slowly.
WARNING: If the LED does not flash slowly, press and hold the Button for at least 10 seconds. The LED should then flash quickly. If not, please repeat or contact our customer support at: support@shelly.cloud.
Step 2
Choose "Add Device". In order to add more devices later, use the Menu at the top right corner of the main screen and click "Add Device". Type the name and password for the WiFi network, to which you want to add Shelly.
Step 3
If using iOS: you will see the following screen. On your iOS device, open Settings > WiFi and connect to the WiFi network created by Shelly, e.g. ShellyDW-35FA58.
If using Android: your phone will automatically scan and include all new Shelly devices in the WiFi network that you defined.
Upon successful Device Inclusion to the WiFi network, you will see the following pop-up:
Success! Inclusion was completed! 1 device were included in your WiFi network. Discovering of devices can take up to a minute depending on your device (phone/tablet). To retry including devices, click the button below.
Step 4
Approximately 30 seconds after discovery of any new devices on the local WiFi network, a list will be displayed by default in the "Discovered Devices" room.
Step 5
Select Discovered Devices and choose the Shelly device you want to include in your account.
Step 6
Enter a name for the Device. Choose a Room, in which the device has to be positioned. You can choose an icon or upload a picture to make it easier to recognize. Press "Save Device".
Step 7
To enable connection to the Shelly Cloud service for remote control and monitoring of the Device, press "yes" on the following pop-up.
Shelly Devices Settings
After your Shelly device is included in the app, you can change its settings and automate the way it works. To enter the details menu of the device, click on its name. From there, you may control the device, as well as edit its appearance and settings.
Sensor settings
Illumination definitions:
- Set Dark - define the period of time (in milliseconds), in which the LED will not be illuminated, when awake.
- Set Dusk - define the period of time (in milliseconds), in which the LED will be illuminated, when awake.
Internet/Security
- WiFi Mode - Client: Allows the device to connect to an available WiFi network. After typing the details in the respective fields, press Connect.
- WiFi Client Back Up: Allows the device to connect to an available WiFi network, as a secondary (backup), if your primary WiFi network becomes unavailable. After typing the details in the respective fields, press Set.
- WiFi Mode - Access Point: Configure Shelly to create a Wi-Fi Access point. After typing the details in the respective fields, press Create Access Point.
- Restrict Login: Restrict the web interface (IP in the Wi-Fi network) of Shelly with a Username and Password. After typing the details in the respective fields, press Restrict Login.
Settings
- Sensor Light: Enable or disable the light of the device, when the door is opened/closed.
- Firmware Update: Update the firmware of Shelly, when a new version is released.
- Time Zone and Geo-location: Enable or Disable the automatic detection of Time Zone and Geo-location.
- Factory Reset: Return Shelly to its factory default settings.
- Device Information:
- Device ID - Unique ID of Shelly
- Device IP - The IP of Shelly in your Wi-Fi network
- Edit Device: From here you can edit device name, room and picture. When you are done, press Save Device.
The Embedded Web Interface
Even without the mobile app, Shelly can be set and controlled through a browser and connection of a mobile phone or tablet.
Abbreviations used:
- Shelly ID: consists of 6 or more characters. It may include numbers and letters, for example 35FA58.
- SSID: the name of the WiFi network, created by the device, for example ShellyDW-35FA58.
- Access Point (AP): in this mode, Shelly creates its own WiFi network.
- Client Mode (CM): in this mode, Shelly connects to another WiFi network.
Installation/Initial inclusion
Step 1
Place your Shelly D/W sensor in the room where you want to use it. Press the Button - the LED should turn on and flash slowly.
WARNING: If the LED does not flash slowly, press and hold the Button for at least 10 seconds. The LED should then flash quickly. If not, please repeat or contact our customer support at: support@shelly.cloud.
Step 2
When the LED is flashing slowly, Shelly has created a WiFi network, with name such as ShellyDW-35FA58. Connect to it.
Step 3
Type 192.168.33.1 into the address field of your browser to load the web interface of Shelly.
General - Home Page
This is the home page of the embedded web interface. Here you will see information about:
- Current Illumination (in LUX)
- Current State (Opened or Closed)
- Current battery percentage
- Connection to Cloud
- Present time
- Settings
Sensor Settings
Illumination Definitions:
- Set Dark - define the period of time (in milliseconds), in which the LED will not be illuminated, when awake.
- Set Dusk - define the period of time (in milliseconds), in which the LED will be illuminated, when awake.
Internet/Security
- WiFi Mode - Client: Allows the device to connect to an available WiFi network. After typing the details in the fields, press Connect.
- WiFi Mode - Access Point: Configure Shelly to create a Wi-Fi Access point. After typing the details in the fields, press Create Access Point.
- Restrict Login: Restrict the web interface of Shelly with a Username and Password. After typing the details in the respective fields, press Restrict Shelly.
Advanced Developer Settings: Here you can change the action execution:
- Via CoAP (COIOT)
- Via MQTT
Cloud: Enable or disable the connection to the Cloud.
Settings
- LED Light Control: Enable or disable the light of the device, when the door is opened/closed.
- Time Zone and Geo-location: Enable or Disable the automatic detection of Time Zone and Geo-location.
- Firmware Update: Update the firmware of Shelly, when a new version is released.
- Factory Reset: Return Shelly to its factory default settings.
- Device Reboot: Restart your Shelly device.
- Device ID: Unique ID of Shelly.
- Device IP: The IP of Shelly in your Wi-Fi network.
Developers support
Our Facebook support group: https://www.facebook.com/groups/ShellyloTCommunitySupport/
Our support e-mail: support@shelly.cloud
Our website: www.shelly.cloud
