Home › Grant Ireland › Grant Ireland TA230 Actuator: Assembly, Disassembly, and Operation Guide

ℹ️ Document Conversion Notice: This page was converted from the original file for easier reading. Diagrams/images may appear only in the original PDF below.

File info: application/pdf · 1 pages · 595.52KB

Grant Ireland TA230 Actuator Guide

Electrical Specifications

Model: TA230

Electrical Rating: Power: 230VAC, Consumption: 2W, IP Rating: IP54.

Compliance: CE Marked. Revision 1.0.

Assembly and Disassembly

This section outlines the procedures for assembling and disassembling the TA230 actuator, detailing the steps involved in fitting and removing the unit.

NC - Normally Closed Operation

Instructions for the normally closed (NC) configuration are provided. This includes a testing procedure: fit the actuator to the base, apply power for six minutes, and allow it to cool. Following testing, users are guided to check the correct adaptor fit using provided visual references.

The document also illustrates the normal operation states, showing the actuator when the power is OFF and when the power is ON.

Models: TA230 Underfloor Heating Actuator, TA230, Underfloor Heating Actuator

Full PDF Document

If the inline viewer fails, it will open the original document in compatibility mode automatically. You can also open the file directly.