Edifier X3s True Wireless Stereo Earbuds
User Manual
Product Description and Accessories
Included Accessories:
- Charging Case
- Type-C Charging Cable
- Ear tips (Sizes: S, M, L, XL)
Key Features:
- Touch Panel Control
- Indicator Lights (Red/Blue LEDs)
? Note: Images are for illustrative purposes only and may differ from the actual product.
Operating Instructions
1. Charging
Earbuds:
- Low Battery: Red LED blinks with a prompt tone "low battery level, please charge.". Place earbuds in the charging case.
- Charging: Red LED ON.
- Fully Charged: Red LED OFF.
Charging Case:
- Connect the case to a power source using the included Type-C charging cable.
- Charging: Red LED ON.
- Fully Charged: Red LED OFF.
Input Specifications: 5V ⎓ 200mA (Earbuds), 5V ⎓ 1A (Charging Case)
Warning: ⚠️ Rechargeable batteries must be disposed of properly for recycling. Do not dispose of in fire. Use only approved power sources.
2. Power On/Off
- Power ON: Remove earbuds from the case (Blue LED lit for 1s).
- Power OFF: Place earbuds in the case.
3. Pairing
- Take earbuds out of the case.
- Press and hold the touch panel on either earbud for 2-3 seconds. Red and Blue LEDs will blink rapidly.
- Select "EDIFIER X3s" in your device's Bluetooth settings to connect.
4. Reset
- Take earbuds out of the case.
- Ensure earbuds are not connected to any Bluetooth device.
- Quickly tap the touch panel on either earbud 3 times and hold until the blue LED blinks rapidly. This clears the pairing record.
- Select "EDIFIER X3s" in your device's Bluetooth settings to connect.
5. Left & Right Connection
- Place earbuds in the case.
- Quickly tap the touch panel on both earbuds 3 times and hold until the blue LEDs blink rapidly. The left and right earbuds will start connecting.
- Red LED will be steady lit after connection.
6. Controls
| Action | Left Touch Panel | Right Touch Panel |
|---|---|---|
| Play/Pause | [Tap x1] | [Tap x1] |
| Previous Track | [Tap x2] | |
| Next Track | [Tap x2] | |
| Volume Down | [Press & Hold] | |
| Volume Up | [Press & Hold] | |
| Game Mode Switch | [Tap x3] | |
| Voice Assistant | [Tap x3] | |
| Accept Call | [Tap x1] | [Tap x1] |
| End/Reject Call | [Press & Hold 2-3s] | [Press & Hold 2-3s] |
FAQs
- Charging case indicator is off: Ensure the case is correctly connected to the power source.
- No sound: Check if earbuds are operating, volume is appropriate, earbuds are correctly connected to the mobile phone, and within working range.
- Bad call quality: Ensure the mobile phone has a strong signal and the earbuds are within the effective distance (10m) with no obstacles.
- Cannot control music playback via earbuds: Ensure the paired device supports the AVRCP profile.