UG-05 Wireless Headphone User Manual

Packing List

• Wireless Headphone
• Boom Microphone
• Micro USB charging cable
• Audio Cable
• User Manual
• Wireless Transmitter
• Mic Foam Cover

Headset and Wireless Transmitter Overview

The UG-05 features a long boom microphone for enhanced call performance. A mute button on the microphone allows users to temporarily disable the mic during calls, indicated by a beep. The colorful decoration LED can be turned on or off by pressing the volume up and volume down buttons simultaneously.

Boom Microphone Features:

• Long boom for better call experience.
• Mute button: Short press to mute/unmute. A beep indicates mute is active.

LED Indicator Light Description (Headphone):

• Pairing Status: Blue and green LEDs twinkle alternately.
• Power On: Blue LED stays on indefinitely; flashes slowly when music is playing.
• Standby Mode: Blue LED stays on indefinitely.
• Low Battery Status: Blue LED flashes 3 times per second.
• Vibration Switch On: White LED stays on indefinitely.
• Vibration Switch Off: White LED goes out.
• Charging Status: Red LED stays on while charging; goes out when fully charged.

Wireless Transmitter LED Indicator Description:

• Power On: Red LED stays on indefinitely.
• Pairing Status: Green LED flashes quickly.
• Connection Succeeded: Green LED stays on indefinitely.

Basic Key Operation

• Turn On: Long press the power button. The blue LED stays on for 3 seconds, and the headphone enters pairing mode.
• Turn Off: Long press the power button. Blue and green LEDs stay on for 2 seconds, then turn off.
• Volume Adjustment: Short press volume up (+) and volume down (-) buttons.
• Music Selection: Long press (+) for next song, long press (-) for previous song.
• Play/Pause/Phone Call: Short press the multifunction button to play/pause music, answer/hang up calls. Long press to refuse a call. Double press redials the last number.
• Vibration Function Switch: Flip the switch down to turn on vibration (white LED on); flip upward to turn off (white LED off).

Wireless Connection

For the First Time Using:

1. Insert the Wireless transmitter into the USB port of your device. The device will automatically install the driver (named UG-05). The transmitter enters standby mode (red LED on).
2. Power on the headphone and long press the power button for 2 seconds to enter pairing status (blue and green LEDs twinkle alternately).
3. Turn on Bluetooth on your device and search for "UG-05". Click to connect. The blue LED will stay on indefinitely upon successful connection.

For the Second Time and Subsequent Using: The transmitter will automatically reconnect to the paired device within 5 minutes of being in range. If out of range for over 5 minutes, the headphone will turn off.

Connect with Other Wireless Devices: Short press the transmitter button to disconnect from the current device (red LED on). Long press the transmitter button for 2 seconds to enter pairing status (green LED flashes quickly) to connect with a new device.

Power On/Off (Transmitter): The transmitter turns on automatically when plugged into a USB port. Unplug to turn off.

Wireless Disconnection/Clear Connection: Short press the transmitter button to disconnect (red LED on). Long press for 8 seconds to clear connection information (green and red LEDs on).

Charging Mode

When the battery is low, charge for approximately 3 hours using the provided USB charging cable. The headphones turn off automatically while charging. The red LED stays on during charging and turns off when fully charged.

Power Status: When connected to an iOS device, the headphone's battery status is displayed on the screen.

Line-in Mode

Plug in the audio cable. The headphone turns off automatically. You can listen to music using the audio cable and choose between the built-in microphone or the long boom microphone. The vibration function can be turned on/off with the vibration switch. Note: Wireless mode cannot be used when in line-in mode. Unplug the audio cable and turn on the headphone to use wireless mode.

Warm Tips

• Charge the headphone with a 5V 1A / 5V 2A charger. High voltage may damage the headphone.
• If the headphone has not been used for over 3 months, charge it before use.
• For long periods of non-use, charge every 3 months to protect the battery.
• Fully charge the headphone before the first use.

Attentions

• Keep and use the headphone at normal temperatures, away from direct sunlight.
• Keep away from fire or hot objects.
• Keep away from damp places or liquids; keep dry.
• Only use the provided USB charging cable.
• Do not disassemble, repair, or modify the headphone.
• Avoid excessive impact. If damage occurs, contact for assistance using the warranty card information.
• If the headphone emits an abnormal smell, temperature, color, or shape, stop use and contact for assistance.

Warning

• Improper battery replacement can cause explosion. Replace only with the same or equivalent type of battery. Do not expose the battery to overheating conditions (sunlight, fire, etc.).
• The device should not be exposed to water droplets or splashes. Do not place near liquids.
• This product is not a toy. Children under 14 require parental supervision.

Headphone Parameters Information

Wireless Transmitter Parameters Information