Memory Module Quick Installation Guide BSMI CNS15663 限用物質含有情況標示聲明書 Declaration of the Presence Condition of the Restricted Substances ...
12WE6-A16G32-10AR
Memory Module - Warranty Statement
The following limited warranty applies to GIGABYTE memory products. The limited warranty applies to the original end user customer of the product so long as the original end user customer owns the product. This limited warranty is non-transferable. GIGABYTE provides replacement or repair services to our customer for defective products within the applicable warranty period. If any, please check on https://www.gigabyte.com for more product detail.
Limitation Of Warranty This limited warranty covers only repairs or replacement of GIGABYTE products. Please note that GIGABYTE is not responsible for providing free repairs if any of the following applies: 1. Damage is caused by natural calamities, accidents, vandalism, power problems or any inappropriate
usage. 2. Damage is caused by accessories, wrapping materials and refillable goods other than the memory
module itself. 3. Product has been used with third-party accessories. 4. Product has been repaired or disassembled by unauthorized technicians. 5. The warranty label, product serial number is altered, damaged, unclear or missing. 6. Product serial number does not conform to the number issued by GIGABYTE or the label has been
damaged. 7. Products were purchased from unauthorized distribution channels. 8. Product compatibility problems don't result from any defect in the GIGABYTE memory module.
Duration of Warranty Memory modules are covered by a "limited warranty".* The warranty period starts from the day of purchase. If the product is damaged due to natural causes, free maintenance service is provided during the product's service life. Proof of the original purchase date is required for this Warranty Service.
* The limited warranty vary by countries, please visit GIGABYTE website for more detail warranty information.
Additional Remarks For certain products, maintenance is done by replacing them with reserved products; therefore it is possible that after maintenance, the product returned to the consumer may not be the original one sent in for maintenance. Due to high product turnover, if the product is no longer under production or the original manufacturer no longer provides maintenance, GIGABYTE will replace it with a substitute. The AORUS RGB Infused Demo Module (GC-RGB Module2) is not covered by the limited warranty, GIGABYTE only provides dead on arrival (DOA) for the accessory. AORUS RGB Infused Demo Module (GC-RGB Module2) only works with AORUS RGB memory, not compatible with other memory module. AORUS RGB Infused Demo Module (GC-RGB Module2) RGB syncs only with AORUS RGB memory. AORUS RGB Infused Demo Module (GC-RGB Module2) is not for sale as an independent accessory.
Caution Recommended voltage is shown on DRAM label. Always turn off your computer before installing or removing a memory module. Only for specific Motherboards and/or CPUs can the product operate at specified data rate. GIGABYTE will not be liable for any damage resulting from user's improper over-clocking application or usage.
Product Exchange and Information Required Send the defective product back to the dealer where it was purchased. During the procedure, we may need you to specify in detail the product's model, serial number, date of purchase and describe the trouble you came across. To avoid damage due to poor packing, and/or shipping damage, use proper packing material when sending the device for service and repair.
After we receive the product requested for maintenance and confirm that the damage is due to the deficient manufacturing process or poor materials, we will immediately send you a well-functioning product. GIGABYTE only accepts product exchanges if the full package is sent back. Full package meaning all the material inside the package has to be returned for a valid swap.
Regulatory Notices
United States of America, Federal Communications Commission Statement
Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information
Product Name: Desktop Memory Module Trade Name: GIGABYTE Model Number: GP-ARS16G32
Responsible Party U.S. Contact Information: G.B.T. Inc. Address: 17358 Railroad street, City Of Industry, CA91748 Tel.: 1-626-854-9338 Internet contact information: https://www.gigabyte.com
FCC Compliance Statement: This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ·· Reorient or relocate the receiving antenna. ·· Increase the separation between the equipment and receiver. ·· Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. ·· Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.
Avis de conformité à la réglementation d'Industrie Canada Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
European Union (EU) CE Declaration of Conformity This device complies with the following directives: Electromagnetic Compatibility Directive 2014/30/EU, Low-voltage Directive 2014/35/EU, RoHS directive (recast) 2011/65/EU & the 2015/863 Statement. This product has been tested and found to comply with all essential requirements of the Directives.
European Union (EU) RoHS (recast) Directive 2011/65/EU & the European Commission Delegated Directive (EU) 2015/863 Statement GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP). The parts and components have been carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic chemicals.
European Union (EU) Community Waste Electrical & Electronic Equipment (WEEE) Directive Statement GIGABYTE will fulfill the national laws as interpreted from the 2012/19/EU WEEE (Waste Electrical and Electronic Equipment) (recast) directive. The WEEE Directive specifies the treatment, collection, recycling and disposal of electric and electronic devices and their components. Under the Directive, used equipment must be marked, collected separately, and disposed of properly.
WEEE Symbol Statement The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure.
For more information about where you can drop off your waste equipment for recycling, please contact your local government office, your household waste disposal service or where you purchased the product for details of environmentally safe recycling.
End of Life Directives-Recycling The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure.
Déclaration de Conformité aux Directives de l'Union européenne (UE) Cet appareil portant la marque CE est conforme aux directives de l'UE suivantes: directive Compatibilité Electromagnétique 2014/30/UE, directive Basse Tension 2014/35/UE et directive RoHS II 2011/65/UE & la déclaration 2015/863. La conformité à ces directives est évaluée sur la base des normes européennes harmonisées applicables.
European Union (EU) CE-Konformitätserklärung Dieses Produkte mit CE-Kennzeichnung erfüllen folgenden EU-Richtlinien: EMV-Richtlinie 2014/30/EU, Niederspannungsrichtlinie 2014/30/EU, Ökodesign-Richtlinie 2009/125/EC, RoHS-Richtlinie 2011/65/EU erfüllt und die 2015/863 Erklärung. Die Konformität mit diesen Richtlinien wird unter Verwendung der entsprechenden Standards zurEuropäischen Normierung beurteilt.
CE declaração de conformidade Este produto com a marcação CE estão em conformidade com das seguintes Diretivas UE: Diretiva Baixa Tensão 2014/35/EU; Diretiva CEM 2014/30/EU; Diretiva Conceção Ecológica 2009/125/CE; Diretiva RSP 2011/65/UE e a declaração 2015/863. A conformidade com estas diretivas é verificada utilizando as normas europeias harmonizadas.
CE Declaración de conformidad Este producto que llevan la marca CE cumplen con las siguientes Directivas de la Unión Europea: Directiva EMC (2014/30/ EU), Directiva de bajo voltaje (2014/35/EU), Directiva de Ecodiseño (2009/125/EC), Directiva RoHS (recast) (2011/65/EU) y la Declaración 2015/863. El cumplimiento de estas directivas se evalúa mediante las normas europeas armonizadas.
Contact point for EU based customers G.B.T. Technology Trading GmbH Bullenkoppel 16, 22047 Hamburg, Germany tel: +49-40-25 33 040
Memory Module Quick Installation Guide
English
Desktop Memory 16 GB Kit (2 x 8 GB) DDR4 3200 MHz RGB Fusion
Installation Guide 1. Please turn off your computer and disconnect the AC
power cord. 2. Before touching the DRAM module and/or any electronic
components on the motherboard, make sure to touch a grounding metal object to discharge any static electricity that might be stored on your body or clothing. 3. If all memory slots are used, the memory with lower density shall be removed when installing a new memory. 4. Suggest to install memory with identical density & data rate on single system for better and stable performance. 5. Modules should only be inserted/ removed when the clips are in an open position. 6. During installation, make sure the memory module is properly aligned to the slot, then fully insert the module all the way into the slot. Proper installation should automatically force the retaining clips to a closed position. Always make sure the memory module is securely installed into the memory slot on your system. 7. Turn on the computer.
16 GB Kit (2 x 8 GB) DDR4 3200 MHz RGB Fusion
1. d
2. d
3. d
4. 5. d 6. d
dd 7.
Deutsch
Desktop Speicher 16 GB Kit (2 x 8 GB) DDR4 3200 MHz RGB Fusion
Installatiegids 1. Bitte schalten Sie Ihren Computer aus und ziehen Sie
das Netzkabel ab. 2. Bevor Sie das DRAM-Modul und/oder elektronische
Komponenten auf dem Motherboard berühren, stellen Sie sicher, dass Sie einen geerdeten Metallgegenstand berühren, um statische Elektrizität zu entladen, die auf Ihrem Körper oder Ihrer Kleidung gespeichert sein könnte. 3. Werden alle Speichersteckplätze genutzt, so muss bei der Installation eines neuen Speichers der Speicher mit geringerer Dichte entfernt werden. 4. Empfohlen wird die Installation von Speicher mit identischer Dichte und Datenrate auf einem einzelnen System für eine bessere und stabilere Leistung. 5. Module dürfen nur in geöffneter Position der Clips eingesetzt/entfernt werden. 6. Vergewissern Sie sich bei der Installation, dass das Speichermodul richtig auf den Steckplatz ausgerichtet ist, und stecken Sie es dann vollständig in den Steckplatz ein. 7. Die korrekte Montage sollte die Halteklammern automatisch in eine geschlossene Position bringen. 8. Vergewissern Sie sich immer, dass das Speichermodul fest in den Speichersteckplatz Ihres Systems eingebaut ist.
Español
Memoria Para PCs de Sobremesa 16 GB Kit (2 x 8 GB) DDR4 3200 MHz RGB Fusion
Guía de Instalación 1. Apague la computadora y desconecte el cable de
alimentación. 2. Antes de tocar el módulo DRAM y / o cualquier
componente electrónico en la placa madre, asegúrese de tocar un objeto de metal con conexión a tierra para descargar la electricidad estática que pueda tener su cuerpo o en su ropa. 3. Si se utilizan todas las ranuras de memoria, se eliminará la memoria con menor densidad cuando se instale una nueva memoria. 4. Sugerimos instalar memorias con la misma densidad y velocidad de datos en un solo sistema para mejor rendimiento y estabilidad. 5. Los módulos solo deben insertarse/retirarse cuando los clips están en una posición abierta. 6. Durante la instalación, asegúrese de que el módulo de memoria esté alineado correctamente con la ranura, luego inserte completamente el módulo en la ranura. La instalación adecuada debería forzar automáticamente los clips de retención a una posición cerrada. Siempre asegúrese de que el módulo de memoria esté bien instalado en las ranuras de memoria de su sistema.
16 GB Kit (2 x 8 GB) DDR4 3200 RGB Fusion 1.
2.
3.
4. 5.
6.
7.
16 (2 x 8 ) DDR4 3200 MHz RGB Fusion 1. ,
. 2. DRAM- /
, , , , . 3. DIMM- , . > . 4. / , . 5. , DIMM-, . . , DIMM-.
16 GB (2 x 8 GB) DDR4 3200 MHz RGB Fusion 1. , AC
. 2. ,
, . 3. , . 4. PC , . 5. . 6. , . , . PC .
16 GB 2 x 8 GBDDR4 3200 MHz RGB Fusion
1. AC
2. DRAM
3. 4. 5. 6.
Português
Memória para Computadores 16 GB Kit (2 x 8 GB) DDR4 3200 MHz RGB Fusion
Installation Guide 1. Desligue o computador e desconecte o cabo de
alimentação. 2. Antes de tocar no módulo DRAM e / ou em qualquer
componente eletrônico da placa-mãe, certifique-se de tocar em um objeto de metal com aterramento para descarregar qualquer eletricidade estática que possa estar armazenada em seu corpo ou roupa. 3. Se todos os slots de memória estiverem em uso, a memória com menor densidade será removida ao instalar uma nova memória. 4. É Sugerido a instalação de memória com densidade e taxa de dados idênticas em um único sistema para melhor desempenho e estabilidade. 5. Os módulos só devem ser inseridos / removidos quando os clipes estiverem em uma posição aberta. 6. Durante a instalação, verifique se o módulo de memória está corretamente alinhado com o slot e insira totalmente o módulo na ranhura. A instalação adequada deve forçar automaticamente os clipes de retenção para a posição fechada. Certifique-se sempre de que o módulo de memória esteja firmemente instalado no slot de memória do sistema.
Administrative Measures for the Restricted Use of Hazardous Substances in Electrical and Electronic Products (China RoHS Declaration)
Hazardous Substances Table
(Parts)
(Hazardous Substances)
(Pb)
(Hg)
(Cd)
(Cr+6)
(PBB)
(PBDE)
PCB Assembly
×
Chip
Heat Sink
()
Other plastic components
(Design options)
These tables are prepared in accordance with the provisions of SJT 11364 SJ/T 11364
The content of such hazardous substance in all homogeneous materials of such component is below the limit required by GB/T 26572. GB/T 26572
× The content of such hazardous substance in a certain homogeneous material of such component is beyond the limit required by GB/T 26572. GB/T 26572
BSMI CNS15663 Declaration of the Presence Condition of the Restricted Substances Marking
Desktop Memory Module Equipment name
GP-ARS16G32 Type designation (Type)
Unit
PCB Assembly
Restricted substances and its chemical symbols
Lead
Mercury Cadmium Hexavalent Polybrominated Polybrominated
(Pb)
(Hg)
(Cd)
chromium
biphenyls
diphenyl ethers
(Cr+6)
(PBB)
(PBDE)
Ñ
´
´
´
´
´
´
´
´
´
´
´
Chip
Heat Sink
´
´
´
´
´
´
()
Other plastic components
´
´
´
´
´
´
(Design options)
1. "0.1 wt %" "0.01 wt %"
Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
2. "" Note 2: "" indicates that the percentage content of the restricted substance does not exceed the percentage
of reference value of presence.
3. "" Note 3: The "" indicates that the restricted substance corresponds to the exemption.
Adobe PDF Library 9.9 Adobe InDesign CS5.5 (7.5.3)