How to creating a new HomePlug AV network？
It is suitable for: PL200KIT, PLW350KIT
Application introduction:
You can connect a number of devices on a powerline network, but you can only use the pair button on two devices at a time. We suppose that the Powerline adapter that connected with the Router is adapter A, and that connected with the computer is adapter B.
Please follow the below steps to create a secured Powerline network using the pair button:
STEP-1:
Press the pair button of Powerline adapter A for about 3 seconds, the Power LED will start flashing.
STEP-2:
Press the pair button of Powerline adapter B for about 3 seconds, the Power LED will start flashing.
Note:This must be done within 2 seconds after pressing the pair button of powerline adapter A.
STEP-3:
Wait for about 3 seconds while your Powerline adapter A and B are connecting. The Power LED on both adapters will stop flashing and become solid light when the connection is made.
