ooma SENSE001 DECT module User Manual Ooma QSG Water Sensor EN 2016 09 30 R4 indd

ooma, Inc. DECT module Ooma QSG Water Sensor EN 2016 09 30 R4 indd

Contents

Manual - Water Sensor

Quick Start Guide
700-0165-100
Step 1 Step 2
Key Features Additional Information Need Help? Pair Your Sensor Mount Your Sensor
To get started, download and install the Ooma Home
Monitoring app on your iOS or Android device.
The app can be found at: ooma.com/app
When the app is installed, log in using your Ooma
phone number and My Ooma password. If you forgot
your password, reset it at: my.ooma.com
Complete the initial setup in the app, and then follow
the instructions on your screen to pair your sensor.
Status indicator light
Pairing button
Water probe
Cable wrap
Tamper sensor
Mounting plate
Quick release button
Starting pairing mode
Your sensor automatically enters pairing mode when
you insert the batteries. You can also press and hold
the pairing button for ve seconds to start pairing
mode. Status indicator light blinks quickly when in
this mode.
Checking battery level
Tap the pairing button to check the battery level.
A long ash indicates that the battery is good.
A slow blink indicates that the battery is low.
Using the included adhesives pads or screws, mount
the large device in a place where it will not come into
contact with water (it is not waterproof). Mount the
water sensor probe so that it is either standing up
or laying down in a position that will allow the two
gold probes to make contact with water in the event
of a leak.
If you are mounting the water probe using screws,
remove the screw cap to expose the screw hole.
Support articles
www.ooma.com/support
User manuals
www.ooma.com/userguide
Community forum
forums.ooma.com
Live customer care:
1-888-711-6662 (US)
1-866-929-5552 (Canada)
Legal
For warranty, safety, and other legal information,
visit ooma.com/legal
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation.
1 42 53 6
A
D
B
C
E
F
GA
D
F
E
G
A
C
B
Status indicator reference
Pairing mode
Quick red ashes
Battery good
Long red ash
Battery low
Short red ashes
Software update
Slow red double ashes
A
Ooma-QSG-Water-Sensor_EN 2016-09-30-R4.indd All Pages 9/30/16 9:24 PM

Navigation menu