u blox 08 QCA6234 User Manual

Rigado LLC QCA6234

a href="https://usermanual.wiki/u-blox" itemprop="url"> u blox >

User Manual

Rigado Inc. 3950 Fairview Industrial Dr. Salem, Oregon 97302 866-6-RIGADO  modules@rigado.com www.rigado.com/modules QCA6234 Modular Certification OEM Integrator Instructions Table of Contents QCA6234 MODULAR CERTIFICATION ................................................................................................................................................... 1 1. INTRODUCTION ...................................................................................................................................................................... 1 2. APPLICABLE MODULE ............................................................................................................................................................. 2 3. DEVIATION FROM SPECIFICATIONS FOR HOST LAYOUT, BOM, AND SCHEMATICS ................................................................... 2 4. VALIDATION OF SIP RADIO CONFORMANCE AS IMPLEMENTED IN HOST ................................................................................ 2 5. ADDITIONAL REGULATORY CONFORMANCE TESTING AND/OR SUBMISSIONS REQUIRED BY THE INTEGRATOR...................... 3 6. ALLOWABLE ANTENNAS TO USE WITH THE SIP MODULE ........................................................................................................ 3 7. FCC STATEMENT: .................................................................................................................................................................... 4 8. FCC IMPORTANT NOTES: ........................................................................................................................................................ 4 9. IC STATEMENT:....................................................................................................................................................................... 5 10. IC IMPORTANT NOTES: ........................................................................................................................................................... 6 11. REQUIRED LABELING ON THE MODULE .................................................................................................................................. 7 11.1 FCC/IC LABELING ON THE MODULE/SIP ................................................................................................................................................. 7 12. REQUIRED REGULATORY WORDING FOR USER GUIDE/INSTALLATION MANUAL..................................................................... 8 12.1 FCC COMPLIANCE INFORMATION ........................................................................................................................................................... 8 13. DOCUMENT HISTORY ............................................................................................................................................................. 9 1. Introduction This document describes the steps that the OEM integrator must follow when designing and manufacturing a system utilizing a certified SiP (System-in-Package) radio module (the “Module”). Failure to follow the instructions in this document may invalidate the radio certifications and authorization to market the host product. The Rigado, Inc. modular certifications described in this document apply only to radio conformance for the Module. The OEM integrator is responsible for all system-level EMI/EMC, Product Safety and RF Safety testing and certification that apply to the host system in countries where the system will be marketed or sold. This document must be read in conjunction with the document “QCA6234 SiP Module Certified Layout” which describes the allowable PCB layout, and schematic which must be implemented in the host design in order to use the SiP modular certifications. To obtain the above referenced document and other design documents, please contact your Rigado Inc account representative. Throughout this document, the term Certified Module and Certified SiP have the same meaning. Rigado Inc offers modular certification for the SiP component. In this case, the SiP is considered “the Module”.
Rigado Inc. 3950 Fairview Industrial Dr. Salem, Oregon 97302 866-6-RIGADO  modules@rigado.com www.rigado.com/modules 2. Applicable Module This document applies specifically and solely to the following component: - Model: QCA6234 - FCCID: 2AA9B08 - IC: 12208A-08 3. Deviation from Specifications for Host Layout, BOM, and Schematics The FCC requires that host systems using SiP modular approvals copy exactly the antenna trace design, matching component and layout used for the originally certified Rigado Inc design. The certified design is specified in the document “QCA6234 SiP Module Certified Layout”. An OEM integrator may wish to deviate from that specification and still utilize the available SiP modular approvals offered by Rigado Inc. For example a host design may require modified antenna trace length and layout, alternate PCB antenna design or use of other filter types not specified in “QCA6234 SiP Module Certified Layout” document. Some deviations would not be allowed and would instead require a full/new certification for FCC and other countries. For example addition of any active components in the RF path on the host PCB would require full/new radio certifications for the host device. Generally, alternate PCB layout, stackup, alternate matching component values and passive filters or diplexers may be authorized using the FCC permissive change process. However, the required steps and responsibilities of the host integrator for the permissive change process, is not detailed in this document. An evaluation must be done on a case-by-case basis and agreed with Rigado Inc. Please take the steps below: Request for Review of Deviation from Rigado Inc Design Specification: 1. Email host product details, description of deviations, proposed schematic of RF section on host PCB (if available) to: modules@rigado.com Sample Text for Subject Line of email: Request for review of deviation from SiP PCB design, Company ABCD, Host Model 12345 2. The Rigado Inc Regulatory team will respond within 14 days requesting further details, informing whether the requested deviation will be allowed with a proposed plan for the OEM Integrator to follow if agreed. NOTE: If a permissive change test and submission to FCC is proposed by Rigado Inc, the OEM Integrator will be responsible for managing the project and resulting test and filing costs. 4. Validation of SiP Radio Conformance as Implemented in Host When a host systems copies exactly the antenna trace design, matching component and layout specified in “QCA6234 SiP Module Certified Layout”, there is still a need to validate that the final product design maintains compliance with radio conformance rules. Minor electrical variations in PCB trace design, stackup and possible coupling with nearby circuits in the end system may result in different emissions characteristics compared to the original SiP design used for standalone modular certification testing performed by Rigado Inc.
Download:
Mirror Download [FCC.gov]
Document ID3531256
Application IDdT8Y42vU9sQEE3RP8JCtpA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize38.99kB (487375 bits)
Date Submitted2017-08-28 00:00:00
Date Available2017-08-29 00:00:00
Creation Date2017-08-22 20:02:15
Producing SoftwareMicrosoft® Word 2016
Document Lastmod2017-08-23 14:58:42
Document TitleUser Manual
Document CreatorMicrosoft® Word 2016
FCC ID Filing: 2AA9B08

Navigation menu