ATI Electronics ATI60601 BLUETOOTH HEADSET User Manual UserManual
ATI Electronics (Shenzhen) Co. Ltd BLUETOOTH HEADSET UserManual
Users Manual
WIRELESS USB HEADSET FEATURING BLUHOOTH® TECHNOLOGY Thank you for purchasing the Mad Catz Wireless Headset Featuring Bluetooth® Technology for use with your PlayStation 3 video game system. Be sure to register your product online at www.madcatz.com and check out our full line of other quality video game accessories. The Bluetooth Headset is a wireless headphone developed with the latest Bluetooth Wireless Technology, which can connect to other Bluetooth devices such as the P33, mobile phones, desktop or notebook computers, PDAs etc., within a range of 30 Ft. (9.15 meters . Contents - Bluetooth Headset - Ear-hook Battery Charging The Headset comes with a rechargeable battery which is notfully charged when new. For firsttime use, it takes 4 hours to fully charge the battery. Subsequent charges will take about I hour and 45 minutes. With the battery fully charged, talk time will be 4 to 5 hours, and the stand-by time will be about 120 hours. 1. Plug the USB Headset into an available USB port on your P83 or PC. The Red LED indicator of the Headset will turn on while charging. 2. When the battery is finished charging, the Red LED indicator of the Headset willturn off. Low Battery Indicator -When the Red LED indicatorflashes slowly, it means the Headset’s battery is low; the Headset will beep as a reminderto recharge. Button Functions - Call Button: Power ON/OFF. - Plus Button: Increase volume. - Minus Button: Decrease volume. Turning the Headset ON or OFF 1. To turn the Headset ON Press and hold the Call button until the Blue LED indicator appears, then release the button. The Blue LED indicator will flash and you should hear an audible beep. 2. To turn the Headset off, repeat the above directions. Pairing the Headset Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent security link between the devices and enable quick access to the services provided without the need to re-enter Pass Keys. You will only need to pair your PS3 and the Headset once. Paired devices remain paired even when: - One of the devices is powered off. -A service connection is interrupted or stopped. - One or both devices are restarted. Pairing the Headset with the P83 Before the Headset can be used with the PS3, the two devices must be 'paired' so they can communicate with each other. Use a gaming controllerfor this procedure. 1. Power on your PS3 console. 2. Within the "Settings" menu, press X on "Accessory Settings." 3. Press X on the icon labeled: "Manage Bluetooth Devices." 4. Press X on "Yes" to pair (register) the headset with the P83 system. 5. Ensure the USB Headset is unplugged. 6. Once atthe next screen, prepare the Headset to be paired with the PS3 by holding down the Call button for 8 seconds. 7. Once the Headset’s LED indicator is alternately flashing Blue and Red (indicating the Headset is readyto be paired), press X on “Start Scanning." (if another device is paired oryou are going through the pairing process again, choose "Yes" to ovenNrite the currently registered device and then choose "Start Scanning") 8. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range. 9. Locate "60601” from the list of available devices and press X on its icon to be prompted for a Pass Key. 10. Enter 0000 (four zeros) as the Pass Key and press X on OK. 11. Press 0 twice to go back two screens. Press X on the "Audio Device Settings" icon. Press X on the “Input Device” icon and select "60601" a. The voice meter will fluctuate when the Headset is active. This indicates the Headset is connected. b. Set the Microphone level to 1 to eliminate feedback. c. This will complete the pairing process. 12. When changing games or resetting the console, go to the “Audio Device Settings" menu and ensure the Headset is being detected before starting the game. If it's not being detected, repeat step 12 (twelve). Product Maintenance -Use of non-original accessories may result in performance deterioration, injury, product damage, electric shock, and warranty termination. -Attempting to disassemble your Headset may damage it, and the warranty will be void. -Use only a clean soft cloth to clean your Headset. - Do not allow children to play with your Headset as they may injure themselves or damage the Headset. Battery Care -Do not store the Headset in extreme hot or cold temperatures and the battery should be recharged every two months if not in use for extended periods of time. -0nly qualified Service Centers are authorized to remove or replace the battery. -The battery can only be charged in a temperature range of 50°F— ll3°F(10°C to 45°C) - Use the Headset at room temperature for maximum battery capacity as it may be reduced if operated in a cold environment. Z-YEAR LIMITED WARRANTY Mad Catz warrants this product to be free from defects in materials and workmanship for the warranty-period. This non-transferable, two (2) year limited warranty is only to you, the first end-user purchaser. If a defect covered by this warranty occurs AND you have registered your product with Mad Catz AND you provide proof of purchase, Mad Catz, at its option, will repair or replace the product at no charge. The Mad Catz two (2) year limited warranty is available to North American and European customers. Your sole and exclusive remedy is repair or replacement of your Mad Catz product. In no event shall Mad Catz liability exceed the original purchase price of the product. This warranty does not apply to: (a) normal wear and tear or abusive use; (b) industrial, professional or commercial use; (c) ifthe product has been tampered with or modified. To receive warranty service you must: -North America: call Mad Catz Technical Support at 13005592287 or 1.619.683.2815 - Europe: call Mad Catz Technical Support at +44 (0) 8450-5084"! - Obtain a Return Authorization Number from Mad Catz Technical Support - Ship the productto Mad Catz at your expense for service - Enclose a copy of the original sales receipt showing a purchase ate - Enclose a full return address with daytime and evening phone numbers TECHNICAL SUPPORT 0nline Support and User Guides: www.madcatz.com E-mail: techsupport@madcatz.com North American telephone: Available 8 AM. to 4 PM. Pacific Standard Time, Monday through Friday (excluding holidays) at 1.800.659.2287 (US only) or 1.619.683.2815 (outside US). E-mail: techsupporteurope@madcatz.com European telephone: Available 9 AM. to 5 PM. Greenwich Mean Time, Monday through Friday (excluding bank holidays) at +44 (0) 8450-508418 ACAUTIONS A - Use this unit only as intended. -To prevent fire or shock hazard, do not expose this unit to rain or moisture. Do not use within 30’ of any water such as swimming pools, bathtubs, or sinks. -To avoid electrical shock, do not disassemble. Refer servicing to qualified personnel only. - Never insert objects of any kind, other than authorized items, into the product as they maytouch dangerous voltage points or short out parts that could result in fire or electrical shock. - Stop using this unit immediately if you begin to feel tired or if you experience discomfort or pain in your hands and/or arms while operating the unit. If the condition persists, consult a doctor. -Avoid prolonged use of this unit. Take breaks every 30 minutes. - Do not dispose of this product in fire. Referto local country, state and city guidelines for appropriate methods of battery disposal. -This product contains small parts that may cause choking if swallowed. Not intended for use by children under 3 years of age. Trade Name: Wireless Headset Featuring Bluetooth Technology Model Number: 60601 FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 ofthe FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connectthe equipment into an outlet on a circuit different from that to which the receiver is connected. - Consultthe dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following rwo conditions: (1) this device may not cause harmful interference and (2) this deVice must accept any interference received. including interference that may cause undesired operation NOTE: The manufacturer is not responsible for and radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could fold the user‘s authority to operate the equipment. This Class B digital apparatus complies with Canadian ICES-003. ©2010 Mad Catz, Inc. 7480 Mission Valley Road, Suite 101, San Diego, CA 92108 U.S.A. Mad Catz and the Mad Catz logo are trademarks or registered trademarks of Mad Catz, Inc., its subsidiaries and affiliates. PlayStation and PS3 are registered trademarks or trademarks of Sony Computer Entertainment Inc. (SCEI). This product is not sponsored, endorsed or approved by SCEI. Made in China. Printed in Hong Kong. All rights reserved. Product features, appearance and specifications may be subjectto change without notice. Please retain this information for future reference. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Mad Catz, Inc. is under license. Othertrademarks and trade names are those of their respective owners. Questions? Visit our web site at www.madca|7_com or call 13005592287 (USA only) or 1.619.683.2815 or +44 (0) 8450-5084"! in Europe.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2010:06:04 09:56:31+08:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2010:06:04 09:56:31+08:00 Format : application/pdf Title : Microsoft Word - UserManual.doc Creator : Administrator Document ID : uuid:795e43b9-7f8c-4880-a030-37d384bcce68 Instance ID : uuid:af77934e-827b-4ef2-b9e8-41f8260c6378 Page Count : 6 Author : AdministratorEXIF Metadata provided by EXIF.tools