Advanced RF Technologies ADRFTECH004 Epoch-M1C-AF, Epoch-M1C-BF & Epoch-M1C-FF 800 MHz User Manual M1C QuickStart

Advanced RF Technologies, Inc. Epoch-M1C-AF, Epoch-M1C-BF & Epoch-M1C-FF 800 MHz M1C QuickStart

Contents

Quick Start Guide

CHECK SIGNAL LEVELS
8
5
CHECK FOR PROPER COMMUNICATION
4
INSERT CD AND INSTALL SOFTWARE
6
SELECT OPERATING BAND(S)
7
MODEM SETUP
Documentation and Software can be found on the CD-ROM
included in the M1C box.
Technical Support
Contact ADRF’s Technical Support Team for assistance with:
-Software Questions
-Setting up the M1C
-M1P Operation
-Troubleshooting Questions
132
Epoch M1C Quick Start Guide
www.adrftech.com
CONNECT ANTENNAS/CABLES
DONOR
SERVER
1-323-254-8131
1-800-313-9345
ADRF
CONNECT USB CABLE AND INSTALL DRIVERS
RUN SOFTWARE AND POWER ON M1C
STATUS WINDOW
7 8
*If the M1C does not have a modem inside, proceed to step 8.
Verify that the box is checked.
Enter the Site ID and Manager IP information
provided by the carrier.
Click the SET button, then the “INSTALL” button.
When installation is complete go to STATUS menu
and verify input/output power, gains, etc.
AUTO CONNECTION
54 6
Now run the M1C software, and plug in the
power converter.
Then turn on the M1C.
(AC/DC Adapter)
After opening the software verify that it is
communicating with the M1C by checking
that the status window has loaded properly
as shown in figure 5.
Go to INSTALL menu on the top of the
GUI.
Click on the band you want selected.
SOFTWARE/POWER SOFTWARE COMMUNICATION BAND SELECTION
MODEM SETUP POST SURVEY
Congratulations! The M1C has been
successfully installed and is ready for use.
It is recommended to do a walk-through
inside of the building and make live phone
calls to verify RF coverage.
132
Connect the USB cable to your computer and
the M1C.
When the Found New Hardware wizard
comes up, click next to automatically search
the CD-ROM for drivers.
*The installation CD must be in the CD-ROM.
SOFTWARE INSTALL USB DRIVER INSTALLATION
Documentation and Software can be found on the CD-ROM
included in the M1C box.
Technical Support
Contact ADRF’s Technical Support Team for assistance with:
-Software Questions
-Setting up the M1C
-M1C Operation
-Troubleshooting Questions
Epoch M1C Quick Start Guide
www.adrftech.com
1-323-254-8131
1-800-313-9345
Connect the donor/server antenna cables to
the M1C’s antenna ports on top as shown in
figure 1.
Adjust antenna positioning to assure
maximum RSSI and coverage.
ANTENNA CONNECTION
Place the installation CD into your CD-ROM.
The setup will start automatically.
Follow the InstallShield Wizard to completely
install the M1C software.
When prompted, connect the USB cable and
install the driver. (Step 3)

Navigation menu