AeroAntenna Technology AT1595-13 Front End Satcom Module with Integrated Antenna User Manual AT1595 13 UserManual
AeroAntenna Technology, Inc. Front End Satcom Module with Integrated Antenna AT1595 13 UserManual
AT1595-13_UserManual
AeroAntenna Technology, Inc. 20732 Lassen Street, Chatsworth, CA 91311 Phone: (818) 993-3842 Fax: (818) 993-4525 AT1595-13 BT1595-13 Active Inmarsat Aviation Antenna System User Manual AT15951384-01 Rev 1 AT1595-13 Antenna BT1595-13 Bias Box/Amplifier Industry Canada: Industrie Canada: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le pressent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisese aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter toutbrouillage radioeslectrique su-bi, meeme si le brouillage est susceptible d'en compromettre le fonctionnement. © 2013 AeroAntenna Technology, Inc. All Rights Reserved. AT1595-13/BT1595-13 Aviation Antenna System Rev 1 22 Sep 2015 1 Introduction & Installation The AT1595-13/BT1595-13 antenna system is designed to provide Internet connectivity for General Aviation and Business Aviation markets. The antenna system requires professional installation. 2 Safety Information Regarding Exposure to RF Signals WARNING To satisfy FCC RF exposure requirements for mobile transmitting devices, the minimum safety distance is 1.072 m (3.517 ft). This separation distance should be maintained between antenna and people during operation of the antenna. During normal operation, the radiation of the antenna is directed up towards the sky and only a person on the roof of the aircraft will be exposed to appreciable amounts of radiation. WARNING MICROWAVE RADIATION MINIMUM SAFE DISTANCE 1.072 METRES 3 Cable Length Requirements To meet Inmarsat performance requirements and comply with FCC regulations, care must be taken to use the appropriate total RF cable length. Your antenna distributor should provide the appropriate cables. Cable Loss requirement Ref. Cable/Length SDU* to Bias Box/Amplifier (TX) 1.5 ± 0.2 dB @ 1650 MHz 44 inches RG-316 SDU* to Bias Box/Amplifier (RX) 1.5 ± 0.2 dB @ 1650 MHz 44 inches RG-316 Bias Box/Amplifier to Antenna 4.7 ± 0.2 dB @ 1650 MHz 290 inches RG-142 * SDU = Satellite Data Unit 4 Connection Diagram Bias Box/Amplifier SDU Antenna TX out RX in GPS in (NMEA) Airplane Power (28 VDC nominal) page 2 of 3 © 2015 AeroAntenna Technology, Inc. All Rights Reserved. 5 Specifications EQUIPMENT TYPE Mobile or Fixed Base Station INTEGRATED OPERATING ENVIRONMENT [ x ] Commercial [ x ] Light Industry & Heavy Industry POWER SUPPLY REQUIREMENT 16 to 40V DC, 120W maximum RF INPUT POWER RATING (US & CANADA) 20 dBm or 0.1 Watt peak (conducted) EIRP 21.6 dBW Max DUTY CYCLE N/A TX OPERATING FREQUENCY RANGE 1626.5 – 1660.5 MHz RX OPERATING FREQUENCY RANGE 1525.0 – 1559.0 MHz RF INPUT IMPEDANCE 50 Ohms MODULATION G1D, G1E, G1W EMISSION DESIGNATION 1K69G1D, 1K69G1E, 1K69G1W ANTENNA TYPE Integral ANTENNA CONNECTOR TYPE Antenna: TNC (Female) Bias Box/Amplifier • ANT: Type N(Female) • TX: TNC(Female) • RX: TNC(Female) TEMPERATURE RATING STORAGE: OPERATIONAL: -55°C to +85°C -55°C to +70°C © 2011 AeroAntenna Technology, Inc. All Rights Reserved. page 3 of 3
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 3 Page Mode : UseOutlines Language : en-US Tagged PDF : Yes Creator : Writer Producer : LibreOffice 5.0 Create Date : 2015:11:06 10:39:18-08:00EXIF Metadata provided by EXIF.tools