Aironet Wireless Communications 102038 Direct Sequence Spread Spectrum Data Transceiver User Manual exerpt from users manual

Aironet Wireless Communications Inc Direct Sequence Spread Spectrum Data Transceiver exerpt from users manual

Contents

exerpt from users manual

Manufacturers Federal Communication Commission
Declaration of Conformity Statement
Models: PC4850
Manufacturer:
Aironet Wireless Communications, Inc.
3875 Embassy Parkway
Akron, OH 44333-8357
330-664-7900
This device complies with Part 15 rules. Operation is subject to the
following two conditions:
1) this device may not cause harmful interference, and 2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a residential environment. This equipment generates, uses, and radiates radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference. However, there is no guarantee
that interference will not occur. If this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following
measures:
Reorient or relocate the receiving antenna.
Increase separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from which the receiver is connected.
Consult the dealer or an experienced radio\TV technician.
Department of Communications—Canada
Canadian Compliance Statement
This Digital apparatus meets all the requirements of the Canadian Interference - Causing Equipment Regulations.
Cet appareil numerique respecte les exigences du Reglement sur le
material broilleur du Canada.
This device complies with RSS-210 of Industry of Canada. Operation is subject to the following two conditions: 1) this
device may cause harmful interference, and 2) this device must accept any interference received, including interference
that may cause undesired operation.
The device is certified to the requirements of RSS-139-1 for 2.4 GHz spread spectrum devices. The use of this device in a
system operating either partially or completely outdoors may require the user to obtain a license for the system according
to the Canadian regulations. For further information, contact your local Industry Canada office.
User Warning
The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or
modification to said product not expressly approved by Aironet could void the user’s authority to operate this device.

Navigation menu