Bibliotheca MR102 RFID Reader User Manual Annex No
Bibliotheca RFID Reader Annex No
Contents
- 1. Manual
- 2. User Manual
Manual
Annex no. 5 Functional Description / User Manual State: 2010-03-01 m. dudde hochfrequenz-technik Vers. no.: 1.10 Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 MONTAGE / INSTALLATION ID ISC.MR102-USB-BIB Anschluss und Inbetriebnahme Installation and starting up Vielen Dank, dass Sie sich für den Kauf des ID ISC.MR102 entschieden haben. Thank you for deciding to purchase the ID ISC.MR102 Der ID ISC.MR102 ist ein Gerät zum berührungslosen Datenaustausch mit gängigen Transpondern nach ISO 15693. Dazu benötigt er eine externe Antenne. Der Anschluss an einem Computer oder sonstiges Gerät erfolgt über die USB Schnittstelle. Der Mid Range Reader für unterschiedlichste Anwendungen in den Bereichen Handel, Logistik und Industrie geeignet und lässt sich problemlos in bestehende Systeme integrieren. The ID ISC.MR102 is a device for contactless data exchange with common Transponder according ISO 15693. To this it requires an external Antenna. The connection to a computer or other equipment is carried out via the USB interface. The HF Mid Range Reader ID ISC.MR102 is suitable to be used in fields of applications like library, retail, logistics and industry and is easy to integrate in existing systems. X3 - USB RFID by FEIG ELECTRONIC LED X1 - VCC 12 - 24 VDC 2013-04-19 – M01213-Bib-ID.doc ANT 1: Antenna (50 Ω ± 15 Ω <15°) MONTAGE / INSTALLATION Technische Daten ID ISC.MR102-USB-BIB Technical Data Gehäuse / housing ABS plastic Gewicht / weight 200 g / 0,44 lbs Schutzart / protection class IP 30 Spannungsversorgung / supply voltage 12 – 24 V DC/ Leistungsaufnahme / power consumption max. 6 W Schnittstelle / Interface USB (2.0) Temperaturbereich / temperature range • Betrieb / operation • Lagerung / storage -25°C to +55°C / -13°F to +131°F -25°C to +85°C / -13°F to +185°F relative Luftfeuchte / relative air humidity 5-95 % (non-condensing) Antenne / antenna External (50 Ω ± 15 Ω < 15°) Betriebsfrequenz / operating frequency 13,56 MHz RF-Sendeleistung / RF- transmitting power 1,2 W ± 1 dB Wichtiger Hinweis: Nichtbeachtung der nachfolgenden Hinweise kann irreparable Schäden am Gerät zur Folge haben. • • • Der Gerät darf nur mit einer angeschlossenen und abgestimmten 50 Ω ± 15 Ω <15° Antenne betrieben werden! Beachten Sie, dass Metallteile in der Nähe der Antenne zu einer Verstimmung der Antenne führen! Bei der Pad-Antenne ID ISC.ANT340240 ist ein Mindestabstand von 20cm zu Metallteilen einzuhalten! Weitere Instruktionen müssen der detaillierten Montageanleitung M01210-xdID.pdf entnommen werden. Die Funkanlage entspricht, bei bestimmungsgemäßer Verwendung den grundlegenden Anforderungen des Artikels 3 und den übrigen einschlägigen Bestimmungen der R&TTE Richtlinie 1999/5/EG vom März 99. Equipment Classification gemäß ETSI EN 300 330 und ETSI EN 301 489: Class 2 Bibliotheca RFID Library Systems AG Important Note: If you do not follow these instructions the device hardware can be damaged irreparable. • Use this device only with a connected and tuned 50 Ω ± 15 Ω <15° antenna! • Note that any metal parts around the antenna can detune the antenna! • If the Pad-Antenna ID ISC.ANT340240 is used, keep a minimum distance of 20cm ( 8 inch ) to any metal parts! More instructions must be read in the detailed mounting instruction M01210-xeID.pdf. When properly used this radio equipment conforms to the essential requirements of Article 3 and the other relevant provisions of the R&TTE Directive 1999/5/EC of March 99. Equipment Classification according to ETSI EN 300 330 and ETSI EN 301 489: Class 2 M01213-Bib-ID.doc MONTAGE / INSTALLATION Notice for USA and Canada ID ISC.MR102-USB-BIB FCC ID: RUVMR102, IC: 5417B-MR102 This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Unauthorized modifications may void the authority granted under Federal communications Commission Rules permitting the operation of this device. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Installation with FCC / IC Approval: FCC-/IC-NOTICE: To comply with FCC Part 15 Rules in the United States / with IC Radio Standards in Canada, the system must be professionally installed to ensure compliance with the Part 15 certification / IC certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States / Canada. The use of the system in any other combination (such as collocated antennas transmitting the same information) is expressly forbidden. This device has been designed to operate with the antennas listed below. Antennas not included in this list are strictly prohibited for use with this device. An SMA socket is provided on the circuit board for connecting the external antenna. Article No. Part No. AAA100144-000 Unified Kiosk Antenna AAA100143-000 Unified Kiosk Antenna AAA100132-000 Antenna Assy, Shielded AAA100227-000 Desktop Antenna Assy Table 1: Antennas with FCC / IC Approval Hinweis zum Netzteil: Power supply reference: Der Reader darf nur von einer Spannungsversorgung The reader has to supplied by a limited power supply gemäß EN 60950-1 Kapitel 2.5 Stromquellen be(e.g. NEC Class 2/LPS power supply) according IEC grenzter Leistung (LPS) oder mit einen nach NEC EN 60950, only Class 2/LPS zertifizierten Netzteil versorgt werden. Bibliotheca RFID Library Systems AG M01213-Bib-ID.doc MONTAGE / INSTALLATION Sicherheits- und Warnhinweise ID ISC.MR102-USB-BIB Safety Instructions • Das Gerät darf nur für den vom Hersteller vorgesehenen Zweck verwendet werden. • The device may only be used for the intended purpose designed by for the manufacturer. • Die Bedienungsanleitung ist zugriffsfähig aufzubewahren und jedem Benutzer auszuhändigen. • The operation manual should be conveniently kept available at all times for each user. • Unzulässige Veränderungen und die Verwendung von Ersatzteilen und Zusatzeinrichtungen, die nicht vom Hersteller des Gerätes verkauft oder empfohlen werden, können Brände, elektrische Schläge und Verletzungen verursachen. Solche Maßnahmen führen daher zu einem Ausschluss der Haftung und der Hersteller übernimmt keine Gewährleistung. • Unauthorized changes and the use of spare parts and additional devices which have not been sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized measures shall exclude any liability by the manufacturer. • Für das Gerät gelten die Gewährleistungsbestimmungen des Herstellers in der zum Zeitpunkt des Kaufs gültigen Fassung. Für eine ungeeignete, falsche manuelle oder automatische Einstellung von Parametern für ein Gerät bzw. ungeeignete Verwendung eines Gerätes wird keine Haftung übernommen. • Reparaturen dürfen nur vom Hersteller durchgeführt werden. • The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the device. The manufacturer shall not be held legally responsible for inaccuracies, errors, or omissions in the manual or automatically set parameters for a device or for an incorrect application of a device. • • • • Anschluss-, Inbetriebnahme-, Wartungs-, und sonstige Arbeiten am Gerät dürfen nur von Fachkräften mit einschlägiger Ausbildung erfolgen. Alle Arbeiten am Gerät und dessen Aufstellung müssen in Übereinstimmung mit den nationalen elektrischen Bestimmungen und den örtlichen Vorschriften durchgeführt werden. • Bei Arbeiten an dem Gerät müssen die jeweils gültigen Sicherheitsvorschriften beachtet werden. • Besonderer Hinweis für Träger von Herzschrittmachern: Obwohl dieses Gerät die zulässigen Grenzwerte für elektromagnetische Felder nicht überschreitet, sollten Sie einen Mindestabstand von 25 cm zwischen dem Gerät und Ihrem Herzschrittmacher einhalten und sich nicht für längere Zeit in unmittelbarer Nähe des Geräts bzw. der Antenne aufhalten. Repairs may only be executed by the manufacturer. Installation, operation, and maintenance procedures should only be carried out by qualified personnel. • Use of the device and its installation must be in accordance with national legal requirements and local electrical codes . • When working on devices the valid safety regulations must be observed. • Special advice for carriers of cardiac pacemakers: Although this device doesn't exceed the valid limits for electromagnetic fields you should keep a minimum distance of 25 cm between the device and your cardiac pacemaker and not stay in an immediate proximity of the device respective the antenna for some time. Copyright 2013 by Bibliotheca RFID Library Systems AG • Erlenstrasse 4a • CH-6343 Rotkreuz Liefermöglichkeiten und technische Änderungen vorbehalten. Data and design subject to change without notice. Supply subject to availability. Bibliotheca RFID Library Systems AG übernimmt keine Gewährleistung dafür, dass die in diesem Dokument enthaltenden Informationen frei von fremden Schutzrechten sind. Bibliotheca RFID Library Systems AG erteilt mit diesem Dokument keine Lizenzen auf eigene oder fremde Patente oder andere Schutzrechte. Bibliotheca RFID Library Systems AG assumes no responsibility for the use of any information contained in this manual and makes no representation that they free of patent infringement. Bibliotheca RFID Library Systems AG does not convey any license under its patent rights nor the rights of others. Bibliotheca RFID Library Systems AG M01213-Bib-ID.doc
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Tagged PDF : No XMP Toolkit : 3.1-702 Modify Date : 2013:05:06 10:24:37+02:00 Create Date : 2011:08:08 10:20:27+02:00 Metadata Date : 2013:05:06 10:24:37+02:00 Creator Tool : Adobe Acrobat 8.1 Combine Files Format : application/pdf Title : Annex No Creator : m.dudde Document ID : uuid:95b83544-5673-4703-b4fa-4c9e3a8acc1a Instance ID : uuid:7072a1bf-3908-4a2a-80d4-b9cb3370933f Producer : Adobe Acrobat 8.1 Has XFA : No Page Count : 5 Author : m.duddeEXIF Metadata provided by EXIF.tools