Centrica Hive AD11 Alertme Wireless Alarm Detector 1-1 User Manual User Guide PRINTED
AlertMe.com Ltd Alertme Wireless Alarm Detector 1-1 User Guide PRINTED
Contents
- 1. manual printed
- 2. manual web based
manual printed
![](/img.php?id=1029647&img=bg1.png)
Intelligent home security
1AlertMe in your home
Quick start guide
The Intruder alarm monitors the Motion Sensors and
Door/Window Sensors when you are away from home and
alerts you if anything happens.
Door/Window Sensors (x3) inform your AlertMe system whether doors
or windows are open or closed. Each sensor has two parts, and you stick
one on the door or window and one on the frame, so
that they are close together when the door or window
is shut. These are useful for checking that doors and
windows are closed when you leave home.
Motion Sensors (x2) watch for people moving around
in a room or area of your home. They are
best positioned towards the top of a
wall, pointing out into the room.
They are the best way of
detecting any intruder in
your home.
The Intruder Alarm
The hub (x 1) is the heart of AlertMe in
your home. It connects to AlertMe 24/7 via
your broadband (with a
backup GPRS link). If your
mains power goes out, it
keeps working on backup
batteries. It checks the
Accessories in your home
are working at all times
and lets you know, via our
secure servers, if anything
happens.
The Hub
The Emergency Alarm service uses Alarm
Detectors (x2) to listen to your existing smoke alarms
(or carbon monoxide alarms, or any other home
alarms which make a loud siren or beeping). With an
Alarm Detector installed next to
each alarm in your home,
your alarms become part
of the AlertMe system,
and you will be alerted
if any of them go off.
The
Emergency Alarm
The Keyfobs
Each Keyfob (x 3) has two buttons:
Home
(the big one) and
Away
(the little one), to blip
your home when you leave and return
home, just like blipping a car. This
controls the Intruder Alarm (letting it
know when to secure your home),
and can also be used to cancel the
Emergency Alarm if it goes off
because you’ve burnt the toast.
AlertMe also uses Keyfobs to keep track of who is
at home, and who is out. You can always
check who is at home using the
secure website.
As well as the serious home safety and security
service offered by AlertMe you also get a button and a
lamp in your kit. New features using these accessories will be
released over time. Check the website to find out what is available
at the moment!
The Lamp (x1) makes the AlertMe wireless
network in your home even more reliable. In
addition, it’s a funky, multi-coloured light which
can be used for all kinds of things.
The Button (x1) is an internet-connected button,
which like the Lamp, can be used in all
kinds of ways. Maybe you’d like to
use your Button as a doorbell or
a panic button, or
something else...
The Fun Stuff
Please turn over for instructions on how to install your alertme system.
You can also visit http://help.alertme.com
Side 1 without tab:Layout 1 7/12/07 13:50 Page 1
![](/img.php?id=1029647&img=bg2.png)
4
7 6
2Unpack your kit. You will also need access
to your broadband router and computer
Plug in the lamp and insert batteries into the
other accessories
Test your AlertMe system Following the web instructions, place
accessories around your home
3Plug your hub into your broadband router
and follow the web instructions at alertme.com
5
Attach sticky pads to your accessories
11/2
Please leave at least 1 1/2
hours for installation
Press for 5
seconds
Hold for 5
seconds
Some accessories may require 2 sticky pads
!
Squeeze the tabs on the side of the accessory to open
!
Once the battery is in place, carefully push together the
two sides of the accessory
!
Insert the keyfob tool into the slot by the keyring and slide
the top of the accessory back.
!
Distance between alarm and sensor - max 5cm
!
Distance between sensors - max 5mm
!
Make sure the indentations on both sensors are facing
each other
!
To remove the sticky pads, pull the exposed tabs away
while holding the accessory firmly in place.
!
Point me so the only movement I see
is people, not pets!
!
Connect your hub to your broadband router with the ethernet cable
provided. Connect it to mains power using the power cable provided.
!
Wave your hand in front of the motion sensor.
!
Check the keyfob arms and disarms your system
!Open windows and doors to check your sensors.
!
Side 2 without tab:Layout 1 7/12/07 13:43 Page 1