Checkpoint Systems S3I0004 S3i XL Spider Wrap (Dual Tech EAS) Alarming User Manual FCC Part 15
Alpha - High Theft Solutions, A Division of Checkpoint Systems, Inc. S3i XL Spider Wrap (Dual Tech EAS) Alarming FCC Part 15
Manual
Certification Exhibit FCC ID: YWZ-S3I0004 IC: 3356F-S3I0004 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-210 ACS Project: 14-2070 Manufacturer: Alpha - High Theft Solutions Model: S3I-0004 User Manual 3998 FAU Blvd. Suite 310 Boca Raton, FL 33431 Tel: 561-961-5585 Fax: 561-961-5587 INSTRUCTIONS FOR S3I SPIDER WRAP XL – S3i 2 Alarm XL Spider Wrap (S3I‐0004) Key Features: Main Housing Flip‐Up Winder • Dual EAS technology (AM/RF) • Includes Lithium baMery. Note: BaMery is factory replaceable. • If a Cable is cut, the Spider Wrap will alarm for approximately five (5) minutes before it is automaXcally silenced. • The sound of the alarm emiMed is between 90‐95 decibels. • 132” (335.28cm) cable Key Locators Audible Alarm Dual EAS Technology Medallion Locking Clip Aircra` Grade Cable ApplicaXon: 1. Extend Cables to desired length 2. Lay Spider Wrap out and posiXon merchandise on top 4. Li` and turn the Flip‐Up Winder Clockwise to snugly Xghten the Cables around the merchandise. An audible clicking noise will be heard. Close the Flip‐Up Winder 5. Ensure that the Locking Clip is completely secured and the Cables are snug around the merchandise. This completes the applicaXon process. 3. PosiXon Cables around the merchandise. Be sure there is one (1) cable on each side of the merchandise. Insert the Locking Clip into Main Housing unXl you hear it click This device complies with Part 15 of the FCC Rules. OperaXon is subject to the following two condiXons: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operaXon. FCC ID:YWZ‐S3I0004, IC: 3356F‐S3I0004 INSTRUCTIONS FOR S3I SPIDER WRAP XL – S3i 2 Alarm XL Spider Wrap (S3I‐0004) Removal: 1. Align Detaching Locators into Key Locators. Lay the S3 HandKey or Super XT Key on the Main Housing 4. Once the Locking Clip is released from the Main Housing, pull out completely. 2. Fully engage the S3 HandKey or Super XT Key on the main housing as shown above. 3. Push the Locking Clip into the Main Housing unXl you hear a faint click 5. Wind up the Cables so the Medallion is engaged with the Main Housing and store in the appropriate bin. This device complies with Part 15 of the FCC Rules. OperaXon is subject to the following two condiXons: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operaXon. FCC ID: YWZ‐S3I0004, IC: 3356F‐S3I0004 PAGE 2 Alpha High The6 Solu9ons S3I‐0004 (S3I SPIDER WRAP XL) Warning: Changes or modifica9ons to this device not expressly approved by Alpha could void the user’s authority to operate the equipment. FCC Informa9on and Compliance RF Exposure This equipment complies with FCC radiaXon exposure limits set forth for an uncontrolled environment. This equipment may operate in direct contact with the body of the user under normal operaXng condiXons. This transmiMer must not be co‐located or operaXng in conjuncXon with any other antenna or transmiMer. For Class A Devices: “NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protecEon against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instrucEon manual, may cause harmful interference to radio communicaEons. OperaEon of this equipment in a residenEal area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.“ Under Industry Canada regulaXons, this radio transmiMer may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmiMer by Industry Canada. To reduce potenXal radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communicaXon. Conformément à la réglementaEon d’Industrie Canada, le présent émeLeur radio peut foncEonner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émeLeur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l’intenEon des autres uElisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communicaEon saEsfaisante. This device complies with Industry Canada licence‐exempt RSS standard(s). OperaXon is subject to the following two condiXons: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operaXon of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitaEon est autorisée aux deux condiEons suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’uElisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est suscepEble d’en compromeLre le foncEonnement.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : Brooke Copeland Create Date : 2014:08:05 11:45:58-04:00 Modify Date : 2014:08:05 11:46:56-04:00 Subject : Language : EN-US Tagged PDF : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2014:08:05 11:46:56-04:00 Creator Tool : Acrobat PDFMaker 11 for Word Document ID : uuid:b745c7af-8161-497a-83bc-dcdd119f6cab Instance ID : uuid:f7b3c81d-0f7f-464e-b469-b45b3ffe14ea Format : application/pdf Title : FCC Part 15 Description : Creator : Brooke Copeland Producer : Adobe PDF Library 11.0 Keywords : Source Modified : D:20140716134704 Company : Advanced Compliance Solutions, Inc. Page Layout : OneColumn Page Count : 4EXIF Metadata provided by EXIF.tools