Creative Labs MF8190 Creative Sound Blaster Roar 2 User Manual 1

Creative Labs Inc Creative Sound Blaster Roar 2 1

Contents

User Manual 1

Download: Creative Labs MF8190 Creative Sound Blaster Roar 2 User Manual 1
Mirror Download [FCC.gov]Creative Labs MF8190 Creative Sound Blaster Roar 2 User Manual 1
Document ID2591639
Application ID26TXeawGzve8Syi19sIXDg==
Document DescriptionUser Manual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize95.97kB (1199597 bits)
Date Submitted2015-04-21 00:00:00
Date Available2015-04-22 00:00:00
Creation Date2015-01-22 14:50:28
Producing SoftwareAdobe PDF Library 10.0.1
Document Lastmod2015-01-22 14:50:34
Document TitleUser Manual 1
Document CreatorAdobe InDesign CS6 (Macintosh)

A USER GUIDE TO
Discover the many features of the Sound Blaster Roar 2!
Discover more ways
to experience your
Sound Blaster Roar!
Model No.: MF8190
http://soundblaster.com/roar-guides
Technical Specification
Bluetooth® Version: Bluetooth 3.0
Operating Frequency: 2402 - 2480 MHz
Lithium Ion Battery: 6000mAh
USB Input: 5V 500 - 1000mA
DC Output: 5V 1000mA
Power consumption during standby/off: < 0.5 W
Power consumption during networked standby for each network port (Bluetooth, USB): < 2.0 W
Power consumption during networked standby when all network ports are activated: < 2.0 W
When the device is powered on and connected to mains with no audio playback and not
performing other main functions,
- it enters into networked standby mode within 20 minutes
- it consumes <0.5 W after all network ports are deactivated/disconnected in 28 hours
How to activate and deactivate wireless ports / connections
- To activate, perform pairing (See Page 6)
- To deactivate, perform clear device list* on the speaker and press the multifunction button
* 1 Ensure your speaker is not connected to any Bluetooth device.
2 With your speaker powered on, Press and hold the Multifunction button until the white LED blinks rapidly. Press
and hold the Multifunction button and Volume “-“ button until a voice prompt is heard indicating the speaker has
been master reset and returned to pairing mode.
Power Adapter Information
Brand: Creative
Model Number: GPE024W-150160-Z
Input: 100-240VAC 50/60Hz 0.75A
Output: 15VDC 1.6A
Operating Temperature range: 0ºC to 45ºC
Supported Bluetooth profiles*:
A2DP (Wireless Stereo Bluetooth), AVRCP (Bluetooth Remote Control),
HFP (Handsfree profile)
Supported Codec: SBC, aptX, AAC
Operating Range: Up to 10 meters, measured in open space.
Walls and structures may affect range of device.
Supports microSD cards of Class 4 and above, up to 32GB in FAT16/32 format
Supported audio formats: MP3, WMA and WAV (16 bit 48Khz PCM)
Support Mp3 and WMA up to 320kbps. Does not support WMA Pro / Lossless.
Records audio, voice or mobile calls at 16k, ADPCM WAV format.
Note: Compliance markings are located on the bottom of this product.
* Refer to your Bluetooth device (notebook¹, PC¹, or mobile device²) manufacturer’s
documentation/website for supported profiles.
¹ Compatible with PC (Windows XP/Vista/7/8/8.1), Apple Macintoshes equipped with
Bluetooth wireless stereo.
² Compatible with most major brands of Bluetooth A2DP enabled mobile phones.
Compatibility Disclaimer
Wireless performance is dependent on your device’s Bluetooth wireless technology. Refer to your
device manufacturer’s manual.
Creative will not be liable for any lost of data or leakages resulting from the use of these devices.
Product Registration
Registering your product ensures you receive the most appropriate service and product support
available. You can register your product during installation or at
http://www.creative.com/register.
Please note that your warranty rights are not dependent on registration.
Safe Removal of Built-in Battery
Detailed instructions on removal of integrated battery can be found at creative.com/support/
ROAR2, these instructions are meant strictly for independently qualified professionals.
Overview
Top
Rear
18
15
10
12
11
14
13
1. Power ON / Standby Button
12. Micro USB Connector
2. Volume Up / Down Button
13. MicroSD Slot
3. Multifunction Button
- For Bluetooth® pairing / connecting
- Answering calls
14. Mic On / Mute Switch
17
16
22
20
21
19
15. Record Button
16. (Record) Play / Pause Button
4. Power / Bluetooth Status Indicator
17. Random / Repeat All Switch
5. Microphone
18. Previous Button
6. Record Indicator
19. Next Button
7. Battery Indicator
20. (MP3 Playback) Play / Pause Button
8. NFC Receptor
9. DC Input
10. Aux-In
21.
/ TeraBass indicator
22.
/ TeraBass button
23. USB Audio / Mass Storage mode switch
11. DC Out (USB 1.0A)
How do I disable Voice Prompt?
● With the speaker powered ON, press both Volume “–“ and Multifunction Button at the
same time. A prompt is heard indicating voice prompt is disabled.
How do I enable Voice Prompt?
● On a speaker with disabled voice prompt, ensure that it is powered ON. Press both
Volume “+“ and Multifunction Button at the same time. A prompt is heard indicating
voice prompt is enabled.
23
Charging your speaker - Power Adapter
Option 1 : Power Adapter
Charge the speaker with the supplied power adapter for at least
3 hours before use. Please ensure your speaker is powered off
3 Hours for optimised charging.*
* Battery performance may degrade over time depending on
charge cycles.
Assembling the Power Adapter
Removing Adapter Plug Head
US, Japan & Taiwan
- Supplied interchangeable plugs
may vary to region and country
Europe
Optimize your charging
The speaker will charge your
smartphones even when the speaker
is off.
When turned on, some smartphones
require a higher charging rate than
battery banks can typically provide.
For the quickest charging time,
turn off your smartphone before
charging it.
The dual-purpose battery powers
your Sound Blaster Roar and also
charges your smartphone!
Here’s how you do it!
Simply connect a USB cable
to the Sound Blaster Roar’s
USB DC Out and the other
end to your smartphone.
Charging your speaker - USB Power
Option 2 : USB
The Sound Blaster ROAR can also be charged using a
USB cable.
It may take longer to charge due to USB power limitation.
Switch off your speaker when charging.
Mains
* Not included, USB
adapter with DC 5V
and up to 1A output
rating can be used.
PC/Mac
TIP:
Lithium-ion battery life may suffer when it is constantly fully depleted
or overexerted at low voltage. It is a good practice to keep the battery
well charged.
For optimized charging: Creative recommends using the bundled USB
cable for optimized charging.
Charging your speaker - LED Indications
Battery Status Indication
Battery full
Battery at about 70%
Battery low
Slow Blink
Running LED
Battery extremely low
Battery charging
Whenever the speaker is ON and connected to a power source, the LED
status indicators will continually blink in sequence. To check the battery
capacity, power OFF the speaker or disconnect it from the power adapter.
Power Saving
For better user connectivity experience, the Sound Blaster Roar will
now by default automatically enter power saving mode only after
approximately 28 hours of inactivity when the power adapter is attached
via a main outlet to the speaker. However, you have the option to keep
the power on permanently if needed.
To Disable Power saving mode with power adapter attached (For
keeping your speaker ON permanently):
1) Ensure that the speaker is powered ON and not connected to any
other devices.
2) Press the Power and Volume “+“ button together. The LED status
indicator will flash once to indicate power saving feature is disabled.
To Enable Power saving mode with power adapter attached:
1) Ensure that the speaker is powered ON and not connected to any
other devices.
2) Press the Power and Volume “-“ button together. The LED status
indicator will flash once to indicate power saving feature is enabled.
Note: The speaker automatically powers down when there is no
Bluetooth connection, recording using microSD card, microSD card
playback or audio input for more than 15 minutes on battery mode.
This feature helps to protect the internal battery and cannot be disabled.
Connecting your speakers - Bluetooth / NFC
The Sound Blaster Roar lets you stream music
wirelessly.
The Sound Blaster Roar
connects to Bluetooth
devices with robust
high-quality aptX® and
AAC music streaming.
NFC technology makes
connecting even easier
– just tap and play!
Here’s how you do it!
A. One-touch pairing with NFC
Turn on NFC on your NFC-enabled
device and tap your device on the
NFC logo to connect.
To disconnect, tap your device on
the Sound Blaster Roar again.
OR
A.
B. Manual Bluetooth pairing
(i) Press and hold
until the
white LED blinks rapidly.
ON
(ii) Select SB ROAR 2 on your
device.
B.
Start playback on your
connected device.
LED Indication
TIP:
What should I do if there is
no audio after connecting via
Bluetooth to the speaker?
Status
Green LED
stays lit
Powered ON but not
connected to any
Bluetooth devices
White LED
blinking rapidly
Bluetooth Pairing
Mode, waiting for
device to connect
White LED
stays lit
Connected to a
Bluetooth device
Please refer to
creative.com/support/ROAR2
on how to disable “Advanced
audio codec” for more details.
Connecting your speakers - Understanding Multipoint
Creative Bluetooth Multipoint lets you pair 2 devices
to the Sound Blaster Roar.
With Creative Bluetooth
Multipoint, you can
connect up to two
Bluetooth devices
simultaneously. Toggle
easily between your
phone and tablet, or
share music playback
from your phone or a
friend’s phone.
Here’s how you do it!
Pause playback on the
connected device.
Pair and connect a second
device (see previous page).
Start playback on either
one of the connected
devices.
To toggle between devices
Pause playback on the first connected
device before starting playback on the
second connected device.
Understanding TeraBass /
feature
/ TeraBass button intelligently boost the bass
and loudness of your music.
Like our in-house reference
Here’s how you do it!
systems, the Roar is tuned to
To toggle between modes, simply
be accurate, balanced, and well
defined, while delivering full
just press the
button.
spectral output at maximium
levels with minimal or no
Toggles from TeraBass ON->
compression. (NOT common
TeraBass with
->OFF
in many battery operated
portables). At low level
listening conditions, some
people may perceive audio
differently. Be it being less
sensitive to bass reproduction,
in less than ideal environments
or strictly personal preference.
The TeraBass feature
intelligently compensates the
loss of perceived loudness in
bass during low level playback
without artificially over
accentuating bass levels.
However when sheer audio
power is needed – such as large
parties and social gatherings
– the
mode instantly
boost the loudness, depth and
spaciousness of the audio.
Simply just toggle between
them !
LED
Status
Green
TeraBass
White
TeraBass +
For added boost
Connecting the Sound Blaster Roar
to the power adapter gives your
music added volume boost. It is
recommended to use a power adapter
when using the
feature.
Switching to USB Audio
You can play digital audio from your PC/Mac with
the Sound Blaster Roar.
Enhance music playback from your PC/Mac with the powerful
Sound Blaster Roar by connecting it with the USB cable supplied.
Here’s how you do it!
Slide the slider switch to USB Audio
to connect USB Audio mode.
Connect the Sound Blaster Roar to
a PC/Mac. A tone is heard indicating
USB audio is connected. *
* If no tone is heard, disconnect the
cable from the computer, and start
from Step 1 again.
Play your music on the PC/Mac.
Enhance your audio
To enhance your digital music further,
you can use the Sound Blaster Control
Panel software. See next page.
If no audio is heard
For Windows:
Click Volume Control and select
Sound Blaster Roar 2 as your output
device.
Note: If the Sound Blaster Roar is not detected
by the computer after your computer recovers
from sleep / hibernate / restart, please
Power OFF and ON the Sound Blaster Roar
to re-establish the USB audio connection.
You may also need to restart your computer’s
media player.
●
For Mac:
1. Go to System Preferences and
click Sound.
2. Click the Output tab and select
Sound Blaster Roar 2.
USB audio will disconnect if
button
is pressed during USB audio mode.
Installing the Sound Blaster Control Panel
The Sound Blaster Control Panel enhances PC/Mac
audio in real time.
Have complete control
over your PC/Mac audio
with the Sound Blaster
Control Panel software.
The SBX Pro Studio
technologies – such
as SBX Bass and SBX
Dialog Plus – intelligently
enhance PC/Mac audio in
real time.
Here’s how you do it!
Slide the slider switch to USB
Audio to connect USB Audio
mode.
Connect the Sound Blaster
Roar to a PC/Mac.
Visit www.soundblaster.com/
downloads/ROAR2/SBCP
to download and install the
Sound Blaster Control Panel. *
Setting the default audio
device.
a. For Windows
This setting will be
automatically configured
after Sound Blaster
Control Panel is installed.
b. For Mac
1. Go to System
Preferences and click
Sound.
2. Click the Output tab
and select Sound
Blaster Roar 2.
* The Sound Blaster Control Panel
requires the speaker to be connected
to your computer as USB audio before
it can be installed.
10
Playing MP3 / WMA audio files
Your Sound Blaster Roar comes with a built-in
WMA/MP3 player.
Besides streaming music
from your smart phone
wirelessly via Bluetooth,
the Sound Blaster Roar
can also play audio files on
a microSD card with the
built-in WMA/MP3 player.
Here’s how you do it!
Playback tips
You can play WMA, 		
WAV or MP3 files.
The Sound Blaster Roar
supports microSD or
microSDHC cards up to
32GB.
Insert a microSD card.
Press
microSD
Card
Navigate through tracks.
To skip tracks (in Repeat All
mode):
Press
or
during playback.
To skip folders:
Press and hold
or
during playback.
OR
Press
or
when playback is stopped.
The Sound Blaster Roar doubles up as a microSD
card reader!
Here’s how you do it!
Slide the slider switch to USB Mass Storage to
connect as USB Mass Storage mode.
Connect the speaker to a computer via USB cable.
Insert a microSD card.
Browse or modify microSD card contents on your
computer.
Note:
l To switch back to USB Audio mode, slide the slider switch to
USB Audio.
Depending on your operating system, a pop-up message may
appear informing you that the Mass Storage Device has not
been ejected properly. This is normal and not disruptive to your
microSD card.
11
Recording audio with your speaker
Recording is made really easy with the
Sound Blaster Roar.
If you need to record the
song playing on your
Sound Blaster Roar or
do a voice recording, just
insert a microSD card
and you’re ready to go.
Here’s how you do it!
Insert a microSD card.
Select source.
Recording
specifications
Audio recording is 		
saved in WAV format
in the VOICE folder.
l For recording, a
Class 4 microSD card
is recommended.
l The default recording
sampling rate is at 16
kHz. This is designed
to record longer voice
recording sessions
(e.g. meetings) and
avoid large file sizes.
l Recording from
microphone also
records the audio
coming out from
Bluetooth and Aux-in
audio sources.
l Simultaneous WMA /
MP3 audio playback
using microSD card
and audio recording
is not supported.
microSD Card
From built-in microphone
Switch on the microphone.
– Records voice and sounds
picked up by the microphone.
From Aux-in / Bluetooth source
Mute the microphone.
– Records Aux-in audio
directly from your media
player or Bluetooth device.
Press
(REC) to start 		
recording.
Press
(REC) again to
stop recording.
Press
(REC) to playback 		
recordings.
To skip recorded tracks:
Press
12
or
during playback.
Answering call with your speaker
You can use the Sound Blaster Roar as a
speakerphone.
When your phone is
connected to the Sound
Blaster Roar you can simply
answer calls without lifting
your phone – just press
a button!
Recording calls
Press
(REC) during
a call to start recording.
Ensure a microSD card is
inserted into the speaker and
the conversation will be saved
in the VOICE folder on the
microSD card.
Here’s how you do it!
Connect your smart device.
(Ensure the microphone is on)
Press
to answer an
incoming call.
Press
call.
To reject a call:
Press and hold
than 2 seconds.
13
again to end a
for more
Understanding Bedtime Mode*
The Sound Blaster Roar is the perfect companion to
end the day with.
Besides playing music at
loud volumes, the Sound
Blaster Roar can also
gently soothe you to sleep.
In Bedtime Mode, audio
playback from the microSD
card will gradually fade out
within 15 or 30 minutes,
after which the speaker will
power off automatically.
This is great for parents of
young children – you can
record yourself reading a
bedtime story and play it
back to your children as
they are about to sleep.
You can also use it to play
music before you sleep!
Here’s how you do it!
Insert a microSD card.
Start audio playback.
To play music files:
Press
To play voice recordings:
Press
(REC).
Activate Bedtime Mode.
For 15 minutes:
Press and hold
you hear a beep.
(REC) until
For 30 minutes:
Press and hold
(REC) until
you hear two beeps.
OR
To deactivate Bedtime Mode:
Press
* Patent pending
14
creative.com
Supplementary documentation for this product includes:
DoC, safety and regulatory information, ErP Regulatory information, and other related regulatory
notices. For more details please visit creative.com/support/ROAR2
For the latest, online version of this guide, visit creative.com/support/ROAR2
Creative Limited Hardware Warranty ( “Creative Warranty”)
Creative warrants that the accompanying product is free from material or workmanship defects for a period of 12 months
(non-transferable Creative Warranty period) from your purchase date. In the event of a genuine product failure, Creative
will assume repair or part replacement (new or refurbished) within the Creative Warranty period. However, this Creative
Warranty does not cover (but not limited to) normal wear and tear, abnormal usage, improper storage and handling,
unauthorised modifications or repair, damages arising from an Act of God and theft. In the event of a genuine product
failure you must provide Creative with the product and proof of purchase of the product by a dated itemised receipt.
For the entire details on the Creative Warranty period of your product, Creative Warranty terms, product returns
and repair procedure, and Creative Customer Support services and contact information, you are advised to refer
to our website at www.creative.com. From here, select your country of residence and proceed to the Support
section. We also recommend you to register your product with us at www.creative.com/register to enjoy a host of additional
product benefits that includes latest news and promotions. Note that your entitlement to the Creative Warranty is not
dependent on product registration.
Please note the Creative Warranty does not affect your statutory rights. Thank you.
The limited warranty for the Product is for twelve (12) months (for the European Union, twenty-four (24) months (excluding
all wear and tear), subject to certain exceptions as stated in the EU Directive 1999/44/EC**) from the date of Your purchase
(“Warranty Period”). The Warranty Period will be extended by each whole day that the Product is out of Your possession
for repair under this warranty.
**Only Applicable for European (EU) countries
A seller in the European Union (EU) may be entitled to refuse to repair or replace the goods if it is (i) impossible or (ii)
disproportionate (eg. where the costs are unreasonably high for the seller) to do so, taking into account the value the goods
would have had (if there were no lack of conformity), the significance of the lack of conformity and where an alternative
remedy would be completed without significant inconvenience to the consumer. In such cases, the consumer may ask
for an appropriate reduction of the price or have the contract rescinded. The consumer is not entitled to have the contract
rescinded if the lack of conformity (or defect or fault) is minor. In which case, the seller is entitled to turn down a request
for rescission of the contract in such a situation. For further details, please refer to Articles 3(3), 3(5) and 3(6) of the EU
Directive 1999/44/EC.
For Australia only:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure. (Creative Technology Ltd, 31 International Business Park, #03-96, Creative Resource, Singapore
609921. Telephone: +65 6895 4433 (standard international call charges apply.)
© 2015 Creative Technology Ltd. All rights reserved. Creative, the Creative Logo, Sound Blaster, Sound Blaster Roar and SBX
Pro Studio are trademarks or registered trademarks of Creative Technology Ltd. in the United States and/or other countries. The
Bluetooth® word mark and logo are owned by the Bluetooth SIG, Inc. and any use of such marks by Creative Technology Ltd
is under license. aptX is a trademark of CSR plc. microSDHC Logo is a trademark of SD-3C, LLC. All other trademarks are the
property of their respective owners and are hereby recognized as such. All specifications are subject to change without notice.
Actual product may differ slightly from images shown. Use of the product is subject to a limited warranty.
PN 03MF819000005 Rev A

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Create Date                     : 2015:01:22 14:50:28+08:00
Metadata Date                   : 2015:01:22 14:50:34+08:00
Modify Date                     : 2015:01:22 14:50:34+08:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:fafa56cd-fdbe-6a47-ab58-83968dcb3a34
Original Document ID            : xmp.did:C5C263F8152068118C148A90DD1DEC76
Document ID                     : xmp.id:90248A7C2E20681183D1CA5222D25F64
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:8F248A7C2E20681183D1CA5222D25F64
Derived From Document ID        : xmp.did:66F4F1912920681183D1CA5222D25F64
Derived From Original Document ID: xmp.did:C5C263F8152068118C148A90DD1DEC76
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2015:01:22 14:50:28+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 16
Creator                         : Adobe InDesign CS6 (Macintosh)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: IBAMF8190

Navigation menu