DAEWOO Electronics LA32L1 32" LCD Monitor User Manual S00E102 MANUAL

Dongbu Daewoo Electronics Corporation 32" LCD Monitor S00E102 MANUAL

Contents

User manual 1 of 2

Proper use guaranteesproduct life.Before using the product, be advisedthat you read this owner’s manual welland try to operate it.INSTRUCTION MANUALLCD TELEVISIONC32HDHBC37HDHBC42HDHBC42FHDHB
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THISAPPARATUS TO RAIN OR MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCHAS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENCAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.The lightning flash with arrowhead symbol, within an equilateraltriangle, is intended to alert the user to the presence of uninsulat-ed “dangerous voltage” within the product’s enclosure that maybe of sufficient magnitude to constitute a risk electric shock.The exclamation point within an equilateral triangle is intended toalert the user to the presence of important operating and servic-ing instructions in the literature accompanying the appliance.Caution
Caution2NOTE :This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-able protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause interference to radiocommunications. However, there is no guarantee that interference will not occur in a partic-ular installation.If this equipment does cause interference to radio or television reception which can bedetermined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures.- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.- Consult authorized service centers for help.- Only shielded interface cable should be used.Finally, any changes or modifications to the equipment by the user notexpressly approved by the grantee or manufacturer could void the usersauthority to operate such equipment,FCC RF INTERFERENCE STATEMENT
IMPORTANT SAFETYINSTRUCTIONS3Please read the following safeguards for your TV and retain for future reference.Always follow all warnings and instructions marked on the television.1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings.  Install in accordance with the manufacturer's instructions.8.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug.  A polarized plug hastwo blades with one wider than the other.  A grounding type plug has two blades and a thirdgrounding prong.  The wide blade or the third prong are provided for your safety.  If theprovided plug does not fit into your outlet, consult an electrician for replacement of the obsoleteoutlet.10. Protect the power cord from being walked on or pinched particularly at plugs, conveniencereceptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specified by themanufacturer, or sold with the apparatus.  When a cart is used, use cautionwhen moving the cart/apparatus combination to avoid injury from tip-over.13. Unplug this apparatus during lightning storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel.  Servicing is required when the apparatus hasbeen damaged in any way, such as power-supply cord or plug is damaged, liquid has beenspilled or objects have fallen into the apparatus, the apparatus has been exposed to rain ormoisture, does not operate normally, or has been dropped.15. DISCONNECTING DEVICE FROM MAINS - Main plug is the disconnecting device. The plugmust remain readily operable.
IMPORTANT SAFETYINSTRUCTIONS416. Wall or Ceiling MountingWhen mounting the product on a wall or ceiling, be sure to install the product using thedesignated mounting tool according to the method recommended by the manufacturer.17. Attachments and EquipmentNever add any attachment and/or equipment without approval of the manufacturer as such additionsmay result in the risk of fire, electric shock or other personal injury.18. Power SourceThis TV should be operated only from the type of power source indicated on the marking label. If youare not sure of the type of power supplied to your home, consult your appliance dealer or local powercompany.19. Power LinesAn outside antenna system should not be located in the vicinity of overhead power lines or otherelectric light or power circuits, or where it can fall into such power lines or circuits. When installing anoutside antenna system, extreme care should be taken to keep from touching such power lines orcircuits as contact with them might be fatal.20. OverloadingDo not overload wall outlets and extension cords as this can result in a risk of fire orelectric shock.21. Object and Liquid EntryNever push objects of any kind into this TV through openings as they may touch dangerous voltagepoints or short-out parts that could result in fire or electric shock. Never spill liquid of any kind on orinto the TV.22. Outdoor Antenna GroundingIf an outside antenna or cable system is connected to the TV, besure the antenna or cable system is grounded so as to providesome protection against voltage surges and built-up static charges.Section 810 of the National Electric Code, ANSI /NFPA No. 70-1984,provides information with respect to proper grounding of the mastand supporting structure, grounding of the lead in wire to an antennadischarge unit, size of grounding conductors, location ofantenna discharge unit, connection to grounding electrodes, andrequirements for the grounding electrode.23. Safety CheckUpon completion of any service or repair to the TV, ask the service technician to perform safety checksto determine that the TV is in safe operating condition.
Warning5This section must be read carefully and followed by the user prior to the operation of the product.The manual states important instructions for the user's own safety, and the proper operation of the product.In case of an accident, please unplug the unit from the outlet immediately.Hold the plug when unplugging the unitfrom the outlet. The cord may cause fire orelectric shock if damaged.Do not cause the product to lean or put it in anunstable place since it may cause a seriousinjury to a person, as well as damage to theproduct if it falls.Do not put any object that contains water -such as flowerpot - near to the unit.The water may penetrate into the unit, and bea cause of fire or hazardous electric shock.To reduce the risk of electric shock, do notremove cover or back. No user -serviceableparts inside. Refer to qualified servicepersonnel for repair.Do not put on or use the product near water andmoisture-such as in a bathroom, washbowl, etc.It may be a cause of fire and electric shockhazards.To prevent fire and damages to the product,unplug the unit from the outlet during lightningstorm, or when it is left unattended and unusedfor a long period of time. Do not let children hang on or climb on theproduct since it may be a cause of seriousinjury.Slots and openings in the case are provided forventilation to ensure reliable operation of theproduct. Never put in any item-such as a coin,paper, match- through these openings since itmay touch dangerous voltage points that couldresult in fire or shock hazard.
Warning6Do not put volatile substance-such asbenzene, naphtha- near the product since itmay cause a change in the product's color.Do not view the TV too closely since it maycause damage in your eyesight.Refer servicing to qualified servicepersonnel for cleaning at least once a yearsince dust inside the TV set may be a resultor fire and malfunctioning of the product.The product should be situated away fromany heat source-such as radiators, heatregisters, stoves, or other products thatproduce heat.Do not put on any heavy item on the powercord since it may result in fire or hazardouselectric shock if the cord is damaged.Do not cover the top of the television set.Ventilation will be prevented, and it may bea cause of fire if the product is internallyoverheated.Unplug the power from the outlet and all the relatedconnections from the unit to prevent electric shock. At leasttwo people must work together to move the TV set whentransporting to prevent the TV from falling, andconsequently, any serious injury or damage.Do not touch the power cord withmoisturized or wet hands when plugging toor unplugging from the outlet since it may bea cause of electric shock.Please be advised of electric wires and cables when installingthe antenna. It may be a cause of hazardous electric shock andfire if the antenna touches or falls on the electric wire; thus, itmust be installed firmly, and far away  from  the cables.Do not spill water or drop the remote controlsince it may be a cause of malfunctioning. This section must be read carefully and followed by the user prior to the operation of the product.The manual states important instructions for the user's own safety, and the proper operation of the product.Please keep the user's manual in a safe place for future reference.Do not expose the product to a dusty ormoisturized place since it may be a cause ofmalfunctioning.
Table ofContents7Installation and MaintenanceStand Construction 9Antenna Connection 11Video Connection 14Camcorder & Video Game Connection 15DVD Player Connection 16STB(Set Top Box) Connection 17PC Connection 18USB Connection 20Cable TV Broadcasting Connection 21Connect with the Dolby Digital AMP 22Name of Each Part 23Basic GuideFunctionsa of the Remote Control 25Method To Use Basic Menu 27To Watch TV 28Setting Up TV Stations 30Selection of TV/VIDEO Input Signal 34Selection of Multimedia Input Signal 35Selection of Media(USB) Input Signal 37Application GuidePicture Adjustment 38Sound Adjustment 42Features - Closed Caption 46Features - Parental Control 48Features - ETC 53Time Setting 54Channel Banner 57Troubleshooting 59Standard of Product 61
SuppliedAccessories8Make sure that the following accessories are provided with the product.AC cordAC cord Instruction manual-Remote controlBatteriesCover Bottom-When installing wall mount, set the coverbottom as shown aboveCable holderWall Mounting Unit(OPTIONAL)123The method of wire arrangement1. Assemble the cable holder enclosed on the backof TV. (PICTURE 1) (ASSEMBLY METHOD: After you push the"A"(prominence part of cable holder) in thehole, rotate the cable holder clockwise as anangle of 90°. You can separate in reverse orderof assembly.)2. Open the cable holder. (PICTURE 2)( you can open the cable holder then press andpush "B" part.)3. After arranging cables with the cable holder,lock "B" again. (PICTURE 3)
StandConstruction932” Stand Assy Construction1. Insert the cover frame stand to the stand base 2. Insert the frame stand into the stand base3. Assemble plate stand base and frame standwith the 4 screws supplied.4. Assemble TV set and stand with the 3 screws supplied.زززززززWhen attaching stand to TV set, besure to cover the surface to protectfrom accidental damage.
StandConstruction1037” Stand Assy Construction1. Insert the TV set to the stand assy.2. Assemble TV set and stand with screw 5EA.زززززWhen attaching stand to TV set, besure to cover the surface to protectfrom accidental damage.
AntennaConnection11Indoor Antenna Connection1. Connect the feeder cable of the antenna to the combining adapter.WHEN THE IMAGE IS NOT CLEAR : Unclear screen image and bad reception may be a cause of wrongantenna connection. Be sure to check its direction and place wheninstalling.2. Connect the combining adapter to the antenna input at the left side of the TV set.WHEN USING THE COMBINING ADAPTER : You may obtain the combining adapter at your closestService Center.Combining adapterVIDEO           L-AUDIO-RMONITORVIDEO L-AUDIO-ROUTAV1ANTHDMI1HDMI2INPUTPCPC/HDMI 1AUDIOY           Pb           Pr           L-AUDIO-RCOMP 1 COMP 2SERVICEOPTICALDIGITAL AUDIOS-VIDEOAntenna InputREAR OF THE TV SET
AntennaConnection12Antenna socket at the back of the TV setANTANTCombining adapterAntenna ConnectionWhen a coaxial cable is used : Plug the coaxial cable to the antenna socket on the wall.When a feeder cable is used : Plug the coaxial cable to the antenna socket on the wall.Antenna socket at the back of the TV set
AntennaConnection13Outdoor Antenna ConnectionOutdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private housesSingle Antenna ConnectionSeparate Antenna Connection.VIDEO           L-AUDIO-RMONITORVIDEO L-AUDIO-ROUTAV1ANTHDMI1HDMI2INPUTPCPC/HDMI 1AUDIOY           Pb           Pr           L-AUDIO-RCOMP 1 COMP 2SERVICEOPTICALDIGITAL AUDIOS-VIDEOVHF AntennaUHF AntennaANTREAR OF THE TV SET       ANT
Video Connection14INPUTVIDEO           L-AUDIO-RMONITORVIDEO L-AUDIO-ROUTAV1ANTHDMI1HDMI2PCPC/HDMI 1AUDIOY           Pb           Pr           L-AUDIO-RCOMP 1 COMP 2SERVICEOPTICALDIGITAL AUDIOS-VIDEOUSBR-AUDIO-L VIDEOAV2INPUTNote : • If your AV device has both Video OUT terminal and S-Video OUT terminal, S-Video connection isrecommended for better picture quality.• If S-Video and RCA jack are connected at the same time, the TV set will only detect the S-Videomode.Connecting with an External SourceYou may connect S-Video1(Rear of the TV) input to enjoy clearer and brighter picture images. You canmake the connection with the AV1 or AV2 input.REAR AND SIDE OF THE TV SET
Camcorder & VideoGame Connection15Note : • If your AV device has both Video OUT terminal and S-Video OUT terminal, S-Video connection isrecommended for better picture quality.• If S-Video and RCA jack are connected at the same time, the TV set will only detect the S-Videomode.Watching the Camcorder Recording or Video Game on TV1. You can use either the S-video or the RCA connector.2. These connectors connect to AV1/2 or S-Video1 as shown below.3. Turn on the TV set and camcorder/video game.4. Press "INPUT" and then You can see input menu. Select AV1, AV2 or S-Video1 mode by pressing"" and “OK” key.VIDEO           L-AUDIO-RMONITORVIDEO L-AUDIO-ROUTAV1ANTHDMI1HDMI2INPUTPCPC/HDMI 1AUDIOY           Pb           Pr           L-AUDIO-RCOMP 1 COMP 2SERVICEOPTICALDIGITAL AUDIOS-VIDEOUSBR-AUDIO-L VIDEOAV2INPUTREAR AND SIDE OF THE TV SET
DVD playerconnection16VIDEO           L-AUDIO-RMONITORVIDEO L-AUDIO-ROUTAV1ANTHDMI1HDMI2INPUTPCPC/HDMI 1AUDIOY           Pb           Pr           L-AUDIO-RCOMP 1 COMP 2SERVICEOPTICALDIGITAL AUDIOS-VIDEOVIDEO           L-AUDIO-RMONITORVIDEO L-AUDIO-ROUTAV1ANTHDMI1HDMI2INPUTPCPC/HDMI 1AUDIOY           Pb           Pr           L-AUDIO-RCOMP 1 COMP 2SERVICEOPTICALDIGITAL AUDIOS-VIDEOUSBR-AUDIO-L VIDEOAV2INPUTREAR OF THE TV SET       REAR AND SIDE OF THE TV SETNote : When you connect with the component, please check the color of cable between DVD and TV set.Note : • If your AV device has both Video OUT terminal and S-Video OUT terminal, S-Video connection isrecommended for better picture quality.• If S-Video and RCA jack are connected at the same time, the TV set will only detect the S-Videomode.When connecting with a component cableWhen connecting with a S-VHS cable and RCA cable
STB(Set Top Box)Connection17VIDEO           L-AUDIO-RMONITORVIDEO L-AUDIO-ROUTAV1ANTHDMI1HDMI2INPUTPCPC/HDMI 1AUDIOY           Pb           Pr           L-AUDIO-RCOMP 1 COMP 2SERVICEOPTICALDIGITAL AUDIOS-VIDEOREAR OF THE TV SET       VIDEO           L-AUDIO-RMONITORVIDEO L-AUDIO-ROUTAV1ANTHDMI1HDMI2INPUTPCPC/HDMI 1AUDIOY           Pb           Pr           L-AUDIO-RCOMP 1 COMP 2SERVICEOPTICALDIGITAL AUDIOS-VIDEOSet Top BoxREAR OF THE TV SETWhen connecting with a HDMI cableWhen connecting with a component cable
PC Connection18VIDEO           L-AUDIO-RMONITORVIDEO L-AUDIO-ROUTAV1ANTHDMI1HDMI2INPUTPCPC/HDMI 1AUDIOY           Pb           Pr           L-AUDIO-RCOMP 1 COMP 2SERVICEOPTICALDIGITAL AUDIOS-VIDEO1. Adjust PC resolution to available resolution in LCD TV.2. Connect the PC and TV set using the D-Sub and Audio cable like below the picture.3. Turn on the PC and TV set.4. Press "INPUT" and then You can see input menu. Select PC mode by pressing " " or "OK" key.VIDEO           L-AUDIO-RMONITORVIDEO L-AUDIO-ROUTAV1ANTHDMI1HDMI2INPUTPCPC/HDMI 1AUDIOY           Pb           Pr           L-AUDIO-RCOMP 1 COMP 2SERVICEOPTICALDIGITAL AUDIOS-VIDEO1. Adjust PC resolution to available resolution in LCD TV.2. Connect the PC and TV set using the HDMI and Audio cable like below the picture.3. Turn on the PC and TV set.4. Press "INPUT" and then You can see input menu. Select PC mode by pressing " " or "OK" key.REAR OF THE TV SETREAR OF THE TV SETWhen connecting with PC(D-Sub) cable.When connecting with a HDMI cable.Note : If the graphic card of the PC only support DVI signal, you must connect the Audio cable as shown above.
PC Connection19PC CONNECTION NOTES:1) If there is a [Vertical Frequency] setting menu in the [Screen] Menu of the PC, adjust the frequency to 60Hz.2) If the PC resolution is too high, it may be hard to read letters. Select a suitable resolution.3) HDMI input port receives only Digital Signal.4) Depending on the graphic card when you plug & unplug the HDMI connection, the screen may not displaycorrectly.Restart the computer if this happens.Note :1. When you connect with component, PC (D-Sub), and HDMI, you must check the input resolution ofexternal devices.2. So if this mode is used at PC mode, the screen can be enlarged.
USBConnection20USB CONNECTION NOTES:Only a USB mass storage device is recognizable.If the USB storage device is connected through a USB hub,the device is not recognizable.A USB storage device using an automatic recognitionprogram may not be recognized.A USB storage device which uses its own driver may not berecognized.The recognition speed of a USB storage device may dependon each device.Please do not turn off the TV or unplug the USB device whenthe connected USB storage device is working. When suchdevice is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.Please do not connect the USB storage device which was artificially maneuvered on the PC. The device maycause the product to malfunction or fail to be played. Never forget to use only a USB storage device whichhas normal music files or image files.Please use only a USB storage device which was formatted as a FAT or NTFS file system provided with theWindows operating system. In case of a storage device formatted as a different utility program which is notsupported by Windows, it may not be recognized.Please connect power to a USB storage device which requires an external power supply. If not, the devicemay not be recognized.Please connect a USB storage device with cable is offered by USB maker. If connected with cable is notoffered by USB maker or an excessively long cable, the device may not be recognized.Some USB storage devices may not be supported or operated smoothly.File alignment method of USB storage device is similar to Window XP and filename can recognize up to16 English characters.Please backup important files because data on USB device may be damaged. Data management isconsumer's responsibility and as a result, the manufacturer does not cover data damage.USBR-AUDIO-L VIDEOAV2INPUTMomery Stick• Connect the USB device to the USB injacks on the side of TV.
Cable TVBroadcastingConnection21Watching cable television is only possible after you have subscribed to the local broadcasting company andinstalled a cable receiver.VIDEO           L-AUDIO-RMONITORVIDEO L-AUDIO-ROUTAV1ANTHDMI1HDMI2INPUTPCPC/HDMI 1AUDIOY           Pb           Pr           L-AUDIO-RCOMP 1 COMP 2SERVICEOPTICALDIGITAL AUDIOS-VIDEOExternal Input Connection SourceAntenna Input ConnectionWatching cable television is only possible after you have subscribed to the local broadcasting companyand installed a cable receiver. You may make the connection to either the Component input, Video1 inputor Video2 input.REAR OF THE TV SET
Connect with theDolby Digital AMP.22VIDEO           L-AUDIO-RMONITORVIDEO L-AUDIO-ROUTAV1ANTHDMI1HDMI2INPUTPCPC/HDMI 1AUDIOY           Pb           Pr           L-AUDIO-RCOMP 1 COMP 2SERVICEOPTICALDIGITAL AUDIOS-VIDEOSurround L Surround RRL CenterWooferDolby Digital AMPINPUTOptical outputIf you connect the optical output to a Dolby digital AMP, you can listen to better sound.REAR OF THE TV SET
Name of Each Part23Control Key Buttons.INPUT Buttons : Each time you press this button, the TV will cycle through:AIR/CABLE  AV1  AV2  Component1  Component2  HDMI1  HDMI2  PCMENU Button : Use this button to enter and exit the MENU.VOL Buttons : Use this buttons to change your TV’s volume or to move cursor in the menu.CH Buttons : Use this buttons to change channels on your TV or to move cursor in the menu.POWER Button : Use this button to TV STAND-BY mode/TV ON mode.Remote control signal receiverThe screen contains the remote control signal receiving window; therefore, point the remote controltowards the screen when using it.Stand-by <LED Indicator>LED BLUE - StandbyLED OFF - SET ONButtons on the TV set have the same functions as those of the remote control.SIDE OF THE TV SETFront Panel and SideINPUT MENU VOL CH POWER12345
Name of Each Part24REAR OF THE TV SETVIDEO           L-AUDIO-RMONITORVIDEO L-AUDIO-ROUTAV1ANTHDMI1HDMI2INPUTPCPC/HDMI 1AUDIOY           Pb           Pr           L-AUDIO-RCOMP 1 COMP 2SERVICEOPTICALDIGITAL AUDIOS-VIDEORear of the TV set
Functionsa of theremote control251, POWER : Turns the TV on and off.2, NUMBER : Press the numbers on this board; you can selectCH directly in TV mode.(EX: When you want to select CH10, you should press down"1", "0" and "OK" within 5second. If you only press down"1", after 5second, CH1 will be selected.)3, DTV(-) : Used to enter a program number for multipleprogram channels such as 2-1, 2-2, etc.4. PREVIOUS CH : Press this button, you can tune to theprevious channel.5, EXIT : Exit from the MENU.6, MENU : Displays the main on-screen menu. Picture, Sound, Channel, Feature, Time.7, GUIDE : Access Electronic Program Guide (EPG). It worksonly in DTV mode.8, NAVIGATION KEY : You can use Navigation Key to move inmulti mode. 9, FAVORITE CH : Press to switch to your favorite channels.10, INPUT : Each time you press this button, the TV will cycleThrough: AIR/CABLE -> AV1/2 -> Comp.1/2-> HDMI1/2 -> PC11, OPTION : Use to quickly select frequently used functions.12, STILL : Press this button to freeze the picture.13, MEDIA : To enter the MEDIA HOME (It can be used onlywhen USB is connected to the TV)14, P.MODE : Picture modes change as follows:Normal -> User -> Dynamic -> Cinema -> Normal.15, MTS : In Analog, you can select sound mode(Mono/Stereo/SAP). In Digital, you can select audiotracks (EX:English/Spanish/French).16, CH : Press to switch to your memorized channels in sequence.17, VOL : Adjust the volume.18, MUTE : Press this button, and the sound goes off. Pressagain, and the sound returns.-
Battery Installation26Inserting Batteries into the Remote Control UnitTo install the batteries, turn the remote control over and open thebattery compartment. Insert the batteries (Two 1.5V, type AAA).Make sure that the polarity matches with the (+) and (-) marksinside of the battery compartment.Note:To avoid damage from possible battery leakage, remove thebatteries if you do not plan to use the remote control handset for anextended period of time.-
Basic Menu27Adjusts Picture Mode- Mode(Normal, User, Dynamic, Cinema), Brightness, Contrast, Color, Tint (NTSC only), Sharpness,Noise Reduction, Color Temp, Dimming, Aspect Ration and PC Screen Mode (Only PC Mode).Adjusts Sound Mode- Effect(Off,Dynamic Bass,ST Voice), Mode(Normal,Movie,Music,News,User),Equalizer,Balance, Auto Volume Control, Digital Volume and SpeakerAdjusts Channel Mode- Auto Search, Antenna(Air/Cable) Edit Channel, Fine Tune, Singnal StrengthAdjusts Feature Mode- Parental Control, Language(English, Espanol, Francais), Caption, Menu Opacity,MGDI Demonstration, InitializeAdjusts Time Mode- Clock Mode, Current Time Set, Time Zone, DST, Sleep Timer, On Timer, Off TimerColor temp.DimmingAspect RatioPC Screen ModeMoveOff16 : 9RGNoise ReductionUser4281581050OK   Select MENU   Exit2. Press the ” ” button.• You may setup according to the directions on thescreen after selecting the desired item by pressing the”” button.• If the setup is completed, exit from the menu bypressing the “MENU” button.Color temp.DimmingAspect RatioPC Screen ModeMoveOff16 : 9RGNoise ReductionUser4281581050OK   Select MENU   Exit- The basic menu appears on the screen if you press the menu button of the remote control.- There are 5 items Picture, Sound, Channel, Features, and Time in the basic menu.- Each item has sub-items under it. If the desired item is selected, the relevant sub-items are displayedupward.1. Press the "MENU" button.• The main menu appears if you press the “MENU” button.Basic Menu
To Watch TV28- Buttons with same name in the main body performs the same function.-When pressing the Digit Key button• Press the "OK" button if using the number button for channelselection. For example, to watch the No.9 channel, Press thenumber button "9" and the "OK" button. If pressing onlynumber “9” button, it takes a longer time to select the channel.• To watch the No.9-1 channel, Press the button "9", " ", "1"and "OK" in sequence.Press the “POWER” button on TV set orRemote control.Note:• The buttons of the remote control and the main bodyoperate only when AC power turn on.• You must pull out the plug of TV set to shut off the ACPowerTo turn sound off• Press the “MUTE” button.• No sound is heard if “MUTE” is displayed on the screen.• Sound is heard again if you press the “MUTE” button onceagain.Check of TV operation status• Pressing the “OK” button, the status of channel or clockbroadcasting being currently watched or entry status ofvideo component is displayed on the screen.Power, Number, DTV, OK, Mute, Input,  ,
To Watch TV2930AirAnalog261. Press the “POWER” button on TV set or remotecontrol.• The Stand-by LED lamp turns on in blue color. • Press the “POWER” button on the TV set or remotecontrol.• The Stand By LED lamp on the front panel begins toflicker in blue color and the TV turns on.2. Press the “ CH ” button.• Select the desired program by pressing the “CH”button or the number buttons.3. Adjust volume.• Sound reduces by pressing the  “VOL ” button.• Sound increases by pressing the “ VOL” button.Note : Sound mutes by pressing the “MUTE” button.4.Press the “POWER” button of right side of the set orRemote control for turning the TV off.• TV turns off and the power lamp changes to blue color.
Setting Up TVStations30- All stations that can be received are stored by this method. It is recommended that you use Auto tuning duringinstallation of this set.Move OK   Select MENU   ExitAntennaEdit ChannelFine TuneSignal Strength 2Move Change MENU   ReturnEdit ChannelFine TuneSignal Strength 2AntennaMove Change MENU   ReturnEdit ChannelFine TuneSignal Strength 2AntennaAuto Search in Progress..Channel Found : 0Auto Search27 %OK   Analog MENU   ExitMove Change MENU   ReturnEdit ChannelFine TuneSignal Strength 2AntennaThis will automatically search thechannels, do you wat to preoceed?Auto SearchOK   Analog MENU   ExitCancel OKMoveMove Change MENU   ReturnEdit ChannelFine TuneSignal Strength 2Antenna1. Press the “MENU” button to select the Channel menu.• Move the selection bar to the Channel menu with ”” buttons. 3. Select the "Auto Search". • Place the selection bar on Auto Search and press the “” button.4. Select the "OK" selection bar pressingby “”button.5. Wait until the Channel menu appears.Auto Search to find Channels2. Select the “Antenna”• Place the selection bar on Antenna and select Air orCable with “ ” buttons.
Setting Up TVStations311. Searching for channel finely• Select a Channel number you want to tune finely withthe “CH”buttons.• Press the “MENU” button and move to the Channelmenu.• Move the selection bar to the Fine tune with  ” ”buttons.• Press the “CB“ buttons to adjust the fine tuning.FAV.CH   Favorite Channel Add/DelChannel Select Add DelMENU   ReturnEdit ChannelAddDel1513154045Fine tune Edit ChannelNote:• If you are unable to get a good picture or Sound because of a poor broadcasting signal,adjustment of Frequency might improve it.1. Adding the Channel• Select a Channel number you want to add with the“NUMBER” buttons.•Press MENU Button. Select Channel by pressing “ “.• Move to Edit Channel. Then select “ADD/DEL” bypressing “CB“.2. Deleting the Channel•Press MENU Button. Select Channel by pressing “ “.• Move to Edit Channel. Then select “ADD/DEL” bypressing “CB“.FAV.CH   Favorite Channel Add/DelChannel Select Add DelMENU   ReturnEdit ChannelAddDel1513154045Move Select MENU   ReturnEdit ChannelFine TuneSignal Strength 2Antenna

Navigation menu