DIOSTECH BT-HS02 Bluetooth Stereo Headset User Manual users manual
DIOSTECH Co., Ltd. Bluetooth Stereo Headset users manual
DIOSTECH >
users manual
BLUETOOTH STEREO HEADSET BT-HS02 USER GUIDE TABLE OF CONTENTS 1. Introduction 2. Package Contents 3. Features 4. Charging 5. Pairing with Bluetooth Devices 6. Re-connecting with the paired device 7. Headset Controls 8. What the lights mean 9. Product Specification 10. Troubleshooting 11. Warning 12. Warranty 13. Need more help? 1. Introduction Thank you for choosing the BT-HS02 Bluetooth Stereo Headset with Bluetooth technology. BT-HS02 Bluetooth Stereo Headset makes connectivity invisible and reliable, besides will provide you with wireless control over many of today’s audio and mobile devices. What is Bluetooth? Bluetooth wireless technology is a short-range communications technology intended to replace the cables connecting portable and/or fixed devices while maintaining high levels of security. It is designed to communicate data/voice within short-range distance of 10m to 100m. Bluetooth technology has achieved global acceptance such that any Bluetooth enabled device, almost everywhere in the world, can connect to other Bluetooth enabled devices in proximity. A fundamental Bluetooth wireless technology strength is the ability to simultaneously handle both data and voice transmissions. This enables users to enjoy variety of innovative solutions such as a hands-free headset for voice calls, printing and fax capabilities, and synchronizing PDA, laptop, and mobile phone applications to name a few. 2. Package Contents BT-HS02 Stereo Headset USB Charging cable User Manual 3. Feature 4. Charging BT-HS02 Stereo Headset uses the rechargeable Lithium-Polymer battery. Make sure your BT-HS02 is fully charged for two hours before you start using. How to charge; 1) Plug the USB cable into the USB port on your computer. 2) The LED indicator is red when charging the headset. 3) The LED indicator turns blue when the battery is fully charged. 4) Remove the battery charger from the headset. 5. Paring with Bluetooth Devices Before you can use your headset with a Bluetooth enabled product, you must pair it with that product. How to pair; i214_□□□ i214_□□□ 6. Re-connecting with a paired device Although you disconnect your headset from the paired device, you don’t need to re-pair with the same device that was already paired before in order to reconnect your headset to that device. You can only turn the power-switch on and wait for a couple of seconds to reconnect your headset to that device. 7. Headset Control Key Definition Key Press Time Sound Effect Slide S/W On Don’t care Start-Up Sound Very Long Warning Sound Pairing Mode - Exit Short Tick Sound Wake Up the Headset Long Tick Sound Short or Long Tick Sound Pressed No Sound Play/Pause Short No Sound Play stop Long Tick Sound Action Power On Pairing Mode - Enter Reconnect Battery Check +/- & << >> Backward Search << Short Tick Sound Forward Search >> Short Tick Sound Volume Up Short Tick Sound on Volume Limit Volume-up (Repeat) Volume-down Continuous Continuous Tick Sound on Volume Limit Short Tick Sound Short Tick Sound Voice Dial Short Tick Sound Call Transfer Long Tick Sound Reject Call Long Tick Sound Hang Up Call Short Tick Sound Last Call Long Tick Sound Cancel Call Short Tick Sound Volume-down (Repeat) Accept Call Mic Mute On/Off << or >> Short * Short key : 0.5~2 seconds, Long key : 2~5 seconds, Very long key : Over 5 seconds 8. What the lights mean LED-Blue Action Status LED-Red ON Time (sec) OFF Time (sec) Status Pairing Blink Mode 1 0.2 0.2 Blink Mode 1 A2DP Streaming Blink Mode 1 0.05 2.0 Off Waiting Connection Blink Mode 2 0.05 0.05 Off Ring Blink Mode 3 0.05 Active Call Blink Mode 1 0.05 Charging Off On Full charged On Off Very Low Off Blink Mode 1 Low Off On Normal On Off Full On Off Battery ON Time (sec) OFF Time (sec) 0.2 0.2 0.2 0.2 1.0 0.05 Off 1.0 2.0 Off Check Mode * Blink Mode 1 : On - Off - On - Off … Blink Mode 2 : On1 - Off1 - On1 - Off2 … Blink Mode 3 : On1 - Off1 - 20 times - Off2 - On1 … Note 9. Products Specification Bluetooth Version Version 2.0, Class II Bluetooth Support Profile A2DP, AVRCP, HSP, HFP RF Frequency 2,4GHz / 79 Channel / AFH Coverage Range* Bluetooth standard 33 feet (10 meters) Music Playback Time* Up to 8 hours (The maximum playback time depends on the usage frequency and environmental factors. A long distance wireless connection and high volume level will increase the power consumption and may decrease the playback time.) Talk Time* Up to 10 hours Standby Time* Approximately 300 hours Charging Time Approximately 2.5 hours Charging Methods Mini USB cable, DC Adapter(5V, 300mA) Battery 290mAh, Lithium-Poymer Headset Speaker Diameter: < 15mm Frequency Response: 20Hz ~ 20KHz SPL (Sound Pressure Level): 93dB @ 1KHz Impedance: 16Ω @ 1V, 1KHz Power Rating: 5mW (Maximum) Mic. Typical : ECM unit (110dB) S/N Ratio Up to 58dB Size and Weight 45.5(W) x 23.5(L) x 11.8(H) , About 40g Supports Bluetooth Hands-Free and Headset Profiles (HFP/HSP), Advanced Audio Distribution Profile (A2DP), and Audio/Video Remote Control Profile (AVRCP) *Performance may vary by device. 10. Troubleshooting 1) If you hear crackling noises, - Bluetooth is a radio technology, which means it is sensitive to objects between the headset and the connected device. It is designed for the headset and the connected device to be used within 100 meters (33 feet) of each other, with no major object in the way. 2) If you have no light on the indicator LED, - Please make sure if the headset is switched on or you also check the battery if it is too low for power on. 3) If you have pairing problems, - You may have deleted the pairing connection in you Bluetooth mobile phone, MP3, and other Audio devices. Please follow the pairing instruction in section 5. 4) If you can not hear anything, - Please increase the volume in the headset, and ensure that the headset is paired to a device that is playing. 5) If you are facing the other problems, - Please contact with the seller. 11. Warning Use of a headset that covers both ears will impair your ability to hear other sounds. Use of such a headset while operating a motor vehicle or riding a bicycle may create a serious hazard to you and/or others, and is prohibited by law in some regions. 12. Warranty z This warranty lasts for one year from the date of purchase of the products. z This warranty extends to you only if you are the end users with the original purchase receipt. z We will, at our option, repair or replace the products that do not conform to the warranty. z The manufacturer or the seller shall not be liable for any incidental consequence or damages by the end users. z This warranty gives you specific legal right. You may also have other rights which vary from state to state. 13. Need more help? Additional page FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, Including interference that may cause undesired operation Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio Frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Do not Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res Page Count : 10 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:e726ef67-7022-4ad6-add2-472c4b21c430 Producer : Acrobat Distiller 6.0 (Windows) Modify Date : 2007:03:27 10:25:44+09:00 Create Date : 2007:03:27 10:25:24+09:00 Creator Tool : PScript5.dll Version 5.2 Metadata Date : 2007:03:27 10:25:44+09:00 Document ID : uuid:294c9bc8-9429-41ed-ae29-6a1e48e1c957 Format : application/pdf Title : Microsoft Word - 10.manual BT-HS02 UI _영문_.doc Creator : Kyung-Taek Author : Kyung-TaekEXIF Metadata provided by EXIF.tools