Denso Wave orporated BHT900 Barcode Handy Terminal User Manual ACDSee print job
Denso Wave Incorporated Barcode Handy Terminal ACDSee print job
User Manual
![](/img.php?id=1363942&img=bg1.png)
![](/img.php?id=1363942&img=bg2.png)
![](/img.php?id=1363942&img=bg3.png)
![](/img.php?id=1363942&img=bg4.png)
![](/img.php?id=1363942&img=bg5.png)
DENSO
Regulatory statement
BHT product use
Country Reference page Remark
USA 2
Canada 4
Europe 3
Australia/New Zealand N/A No need regulatory statement
Japan N/A No need regulatory statement
Taiwan 4
China N/A No need regulatory statement
Korea N/A No need regulatory statement
Hong Kong N/A No need regulatory statement
Thailand N/A No need regulatory statement
Russia 5
USA Regulatory statement
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
IMPORTANT NOTE:
Radiation Exposure Statement:
The product comply with the US/Canada portable RF exposure limit set
forth for an uncontrolled environment and are safe for intended
operation as described in this manual. The further RF exposure
reduction can be achieved if the product can be kept as far as
possible from the user body.
![](/img.php?id=1363942&img=bg7.png)
Europe Regulatory statement
Important notice
This Barcode Handy Terminal may be operated in below country:
AT BE CH CY
CZ DE DK ES
FI FR GB GR
EE HU IT IE
IS LI LT LU
LV MT NL NO
PL PT SE SI
SK BG RO TR
Canada Regulatory statement
Industry Canada Statement
This device complies with RSS-210 of the Industry CanadaRules. Operation is
subject to the following twoconditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
IMPORTANT NOTE:
Radiation Exposure Statement:
The product comply with the US/Canada portable RF exposure limit set
forth for an uncontrolled environment and are safe for intended
operation as described in this manual. The further RF exposure
reduction can be achieved if the product can be kept as far as
possible from the user body.
Taiwan Regulatory statement
NCC 警語
低功電波輻射性電機管理辦法第十二條: 經型式認證合格之低功率射頻電機,非
經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特
性及功能。 第十四條: 低功率射頻電機之使用不得影響飛航安全及干擾合法通
信;經發現現象時,應立即停用,並改善至無干擾時方得繼續使用。 前項合法
通信,指依電信法規定作業之無線電信。低功率射頻電機需忍受合法通信或工
業、科學及醫療用電波輻射性電機設備之干擾。
![](/img.php?id=1363942&img=bg9.png)
Russia Regulatory statement