Dongguan Newmen Electronics Technology NS-PNK6811 Wireless Keyboard With Integrated Touch Pad User Manual NS PNK6811 NS PNK6811 C 15 0381 QSG V1 EN ai
Dongguan Newmen Electronics Technology Co.,LTD Wireless Keyboard With Integrated Touch Pad NS PNK6811 NS PNK6811 C 15 0381 QSG V1 EN ai
Users Manual
V2 FINAL FOR PRINT NS-PNK6811_NS-PNK6811-C_15-0381_QSG_V1_EN.ai 1 6/9/2015 12:46:21 PM Final flat size: 215.9 × 158.75 mm Final fold size: 107.95 × 158.75 mm Quick Setup Guide | NS-PNK6811/NS-PNK6811-C Wireless Keyboard with Touch Pad PACKAGE CONTENTS INSTALLING THE USB NANO RECEIVER AND BATTERIES • • • • 1 Plug the USB nano receiver into an available USB port on your computer. Windows automatically finds and installs the appropriate driver. 2 Turn your keyboard over and open the battery compartment. 3 Insert two AA batteries (included) into the battery compartment. Make sure that you match the + and – symbols on the batteries with the + and – symbols in the battery compartment. The keyboard automatically detects the USB nano receiver. Wireless keyboard USB nano receiver AA batteries (2) Quick Setup Guide SYSTEM REQUIREMENTS • Windows® 10, Windows® 8.1, Windows® 8, Windows® 7, Windows Vista®, or Mac OS 10.X or higher. • One available USB port FEATURES Notes: • If the keyboard and USB nano receiver do not automatically pair, you can force them to pair by pressing the Esc, 1, and = keys simultaneously on the keyboard. The low battery/pairing indicator LED on the keyboard blinks while in pairing mode (10 seconds). • A low battery LED indicator notifies you when you need to change batteries. 4 Close the battery compartment and turn the keyboard over. You can immediately begin using your keyboard. USING THE TOUCH PAD # FUNCTION DESCRIPTION 1 Low battery and pair mode indicator LED Low battery: The LED will blink if the battery is low. Pair mode: The LED will blink while pairing, then stay on for two seconds once successfully paired. 2 Touch pad For cursor control 3 Mouse buttons Use these buttons just like you would left and right mouse buttons. Before using your new product, please read these instructions to prevent any damage. WINDOWS 8 (OR LATER) GESTURES DESCRIPTION One finger swipe from left edge towards center Switch application; N/A for Windows 10" One finger swipe from right edge towards center Show charm bar One finger swipe from top edge towards center Show application bar Two finger click Right button click; N/A for Windows 10" Two finger slide right or left Horizontal scrolling Two finger up or down Up and down scrolling Two finger spread/pinch Zoom in and out Three finger click Middle button click Three finger slide down Desktop display/minimize all Three finger slide up Start button Three finger slide right or left Forward/backward button NS-PNK6811_NS-PNK6811-C_15-0381_QSG_V1_EN.ai 2 6/9/2015 12:46:27 PM CLEANING YOUR KEYBOARD • Wipe the keyboard with a damp, lint-free cloth. SPECIFICATIONS Keyboard: • Dimension (L×W×H): 16 × 5.8 × .8 in. (40.6 × 14.9 × 2.1 cm) TROUBLESHOOTING My keyboard is not working. • Move your keyboard closer to your computer. • Make sure that your computer meets the system requirements. • Replace the keyboard batteries. • Try plugging your USB nano receiver into a different USB port on your computer. • Re-plug the USB nano receiver into the USB port on your computer, then press the Esc, 1, and = keys simultaneously on the keyboard to pair the keyboard with the USB nano receiver. After pairing successfully, the LED turns off. • Check the batteries in your keyboard. The low battery/pairing indicator LED blinks for 10 seconds when the batteries are low. LEGAL NOTICES FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RSS-Gen and RSS-210 statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RSS-102 statement This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé. ONE-YEAR LIMITED WARRANTY For complete warranty, visit www.insigniaproducts.com. CONTACT INSIGNIA 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC ©2015 Best Buy. All rights reserved. Made in China V2 ENGLISH 15-0381
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : jennifer Create Date : 2015:06:09 12:46:26-06:00 Modify Date : 2015:06:11 15:52:06+08:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2015:06:11 15:52:06+08:00 Format : application/pdf Title : NS-PNK6811_NS-PNK6811-C_15-0381_QSG_V1_EN.ai Creator : jennifer Producer : Acrobat Distiller 10.1.14 (Windows) Document ID : uuid:e3d16391-d145-474b-b088-33210a4c2e03 Instance ID : uuid:daffeddb-9ec9-4abe-9d2e-b76d86d8a458 Page Count : 2EXIF Metadata provided by EXIF.tools