Dongguan Newmen Electronics Technology NSPNM6103BK Bluetooth Mouse User Manual NS PNM6103 BK 15 0609 QSG V2 EN ai
Dongguan Newmen Electronics Technology Co.,LTD Bluetooth Mouse NS PNM6103 BK 15 0609 QSG V2 EN ai
Users Manual
V2 Final flat size: 314.33 x 148.08 mm Final fold size: 104.77 x 148.08 mm NS-PNM6103-BK_15-0609_QSG_V2_EN.ai 1 7/28/2015 12:09:50 PM Quick Setup Guide | NS-PNM6103-BK Bluetooth Mouse PACKAGE CONTENTS MOUSE FEATURES • Bluetooth mouse • AA battery (1) • Quick Setup Guide FUNCTION DESCRIPTION LED indicator • Lights for three seconds when you turn on your mouse. • Blinks two times when your mouse is in pairing mode. • Lights for two seconds when pairing is complete. • Blinks every five seconds when the battery is low. • Lights for one minute when your mouse wakes up from standby mode. CONNECT button Press to put your mouse in pairing mode. SYSTEM REQUIREMENTS • Windows® 10, Windows®8.1, Windows®8, Windows®7, or Mac OS 10.x or higher • Built-in Bluetooth function or Bluetooth receiver FEATURES On/off switch CONNECT button INSTALLING THE BATTERY AND CONNECTING THE MOUSE 1 Open the battery compartment and insert one AA battery (included). Make sure that you match the + and – symbols in the battery compartment. 2 Press the CONNECT button on the bottom of the mouse. The LED indicator blinks twice to indicate your mouse is in pairing mode. 3 Pair your mouse to your computer. PC: 1 Click the Bluetooth icon in your computer’s taskbar. 2 Click Add a Bluetooth device. Your computer searches for your mouse. 3 Double-click Bluetooth 3.0 Mouse. Mac: 1 Open System Preferences in the dock. 2 Click the Bluetooth icon. 3 Click + in the lower-left corner. Your computer searches for your mouse. 4 Double-click Bluetooth 3.0 Mouse. Note: If your computer has never connected to a Bluetooth device, click Set Up New Device to pair your mouse to your computer. When pairing is complete, the LED indicator lights for two seconds. LED indicator TURNING YOUR MOUSE ON AND OFF Before using your new product, please read these instructions to prevent any damage. 1 The first time you use your mouse, turn it on by moving the on/off switch on the bottom of the mouse to the on position. 2 If you don’t use your mouse for five minutes, it switches to standby mode to conserve the battery. To wake up your mouse, press any button or move it. FINAL FOR PRINT NS-PNM6103-BK_15-0609_QSG_V2_EN.ai 2 7/28/2015 12:09:56 PM UN-PAIRING THE MOUSE FROM YOUR PC OR MAC TROUBLESHOOTING PC: 1 Click the Bluetooth icon on your task bar. 2 Click Show Bluetooth Devices. 3 Right-click (Win 7) or click (Win 8) Bluetooth 3.0 Mouse. 4 Click Remove Device to un-pair the mouse. Mac: 1 Open System Preferences in the dock. 2 Click the Bluetooth icon . 3 Click the - in the left-lower corner. 4 When it asks Are you sure you want to remove this device?, click Remove to un-pair the mouse. My mouse is not working. • Move your mouse closer to your computer. • Make sure that your computer meets the system requirements. • Make sure that your mouse is paired by pressing the blue CONNECT button on the bottom of your mouse, then pair it with your computer. • Make sure that the Bluetooth function on your computer or your Bluetooth receiver is working. • Un-pair your mouse from your computer, then re-pair it. • If the LED indicator on your mouse is blinking every five seconds, replace the battery. LEGAL NOTICES CLEANING YOUR MOUSE • Wipe the mouse with a damp, lint-free cloth. SPECIFICATIONS Mouse: • Dimension (L × W × H): 3.93 × 2.51 × 1.45 in. (10 × 6.4 × 3.7 cm) • Weight: 2.05 oz. (.058 kg)(without battery) • Battery: 1 AA alkaline battery • Battery life: 3 months (based on two hours moving per day) • Rating: 1.5V DC - 15mA FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RSS-Gen and RSS-210 statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RSS-102 statement This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé. ONE-YEAR LIMITED WARRANTY For complete warranty, visit www.insigniaproducts.com. CONTACT INSIGNIA 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC ©2015 Best Buy. All rights reserved. Made in China V2 ENGLISH 15-0609
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Acrobat Distiller 10.1.14 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2015:07:28 13:16:27-05:00 Create Date : 2015:07:28 12:09:56-04:00 Metadata Date : 2015:07:28 13:16:27-05:00 Format : application/pdf Title : NS-PNM6103-BK_15-0609_QSG_V2_EN.ai Creator : jennifer Document ID : uuid:82175b91-757f-462a-afda-322cf13de19b Instance ID : uuid:b99e31bc-c81d-4508-807c-601c70dcfcea Page Count : 2 Author : jenniferEXIF Metadata provided by EXIF.tools