Fisher Price 71924R Car Seat Dashboard with Remote Control User Manual Product Brochure
Fisher-Price Inc. Car Seat Dashboard with Remote Control Product Brochure
Product Brochure
![](/img.php?id=97498&img=bg1.png)
Car Seat Dashboard
with Remote Control
Model Number 71924
WARNING
Please save these instructions for future reference.
Batteries must be installed by an adult.
Requires one 9 volt (6LR61) and three “AA” (LR6) alkaline batteries (not included).
Tool required for battery installation: Phillips Screwdriver (not included).
To prevent strangulation, never place product in a crib or playpen where baby
could become entangled. NEVER add strings or ties to the product.
![](/img.php?id=97498&img=bg2.png)
Battery
Compartment
Dashboard
Cover
Battery Installation Battery Tips
Hint: We recommend the use of alkaline batteries for
longer battery life.
9V
(6LR61)
1.5V X 3
“AA” (LR6)
SHOWN
ACTUAL SIZE
SHOWN ACTUAL SIZE
Battery
Compartment
Remote
Control
Dashboard
• Turn the dashboard face down. Open the fasteners on the
cover to locate the battery compartment on the dashboard.
• Loosen the screws in the battery compartment door with a
Phillips screwdriver. Remove the battery compartment door.
• Insert three “AA” (LR6) alkaline batteries as indicated inside
the battery compartment.
• Replace the battery compartment door and tighten the
screws with a Phillips screwdriver. Do not over-tighten.
Remote Control
• Loosen the screws in the battery compartment door with a
Phillips screwdriver. Remove the battery compartment door.
• Snap the contacts of a 9V (6LR61) alkaline battery to the
contacts inside the battery compartment.
• Replace the battery compartment door and tighten the
screws with a Phillips screwdriver. Do not over-tighten. 2
Set-Up
• Slide the power/volume control switch on to low volume .
• Press the horn on the dashboard to activate the system.
The lights will twinkle. The system will be on for
approximately two hours.
• Press the horn again to hear a soothing lullaby or
entertaining song. Adjust the volume to a comfortable
listening level for your child by either:
- keeping the switch on low volume .
- sliding the switch to high volume .
Hint: Although the system is on, unless the toy is playing
music or sound effects and lights are twinkling, only a very
small amount of power is being used from the batteries.
• Re-fasten the fasteners on the cover.
Press horn to
activate system.
Power/
Volume
Control
Switch
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use.
Always remove exhausted batteries from the toy and
remote. Battery leakage and corrosion can damage this
toy. Dispose of batteries safely.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as
recommended in the Battery Installation instructions are to
be used.
• If removable rechargeable batteries are used, they are only
to be charged under adult supervision.
• Rechargeable batteries are to be removed from the toy
before they are charged.
• If you use a battery charger, it should be examined
regularly for damage to the cord, plug, enclosure and other
parts. Do not use a damaged battery charger until it has
been properly repaired.
![](/img.php?id=97498&img=bg3.png)
Attaching the Dashboard to a Car Seat
IMPORTANT! This product is designed to attach to most car seats. If, after attaching this product to your car seat you find that
you cannot properly tighten your car seat’s restraint system (as described in the car seat manufacturer’s instructions), DO NOT
use this product on the car seat.
• Position the dashboard upright with the horn facing baby.
• Fasten the clips on the underside of the dashboard to the
car seat bolster fabric, as shown.
Clip
Car Seat
Bolster Fabric
Dashboard Horn
Car Seat with Bolster
Before attaching the dashboard to your car seat’s restraint
system, check to be sure the car seat restraint system is
securing your child properly. Check all restraint system
belts (shoulder, lap, crotch, etc.) by pulling on them. The
straps should not pull more than one inch (two fingers)
away from your child.
• Position the dashboard so that the horn is upright and
facing away from baby.
• Wrap the dashboard straps around the crotch strap (of the
car seat restraint system) and fasten.
Horn Dashboard
Car Seat Restraint System
Car Seat with 3-Point or
5-Point Restraint
3
![](/img.php?id=97498&img=bg4.png)
Adult Use with Remote Control
• Press the horn on the dashboard to activate the system.
The lights will twinkle.
• Press the remote control button once for soothing lullabies
and a light display. Music and lights plays for approximately
three minutes.
• To pause lullabies, press the remote control control
button again.
• To switch to entertaining songs, press the remote control
button a third time. A musical selection and light display
plays for approximately three minutes.
• To pause songs, press the remote control button again.
• To replay lullabies, press the remote control button again.
Hint: Each time the remote control button is pressed, the toy
will cycle between lullabies - pause - songs - pause, etc.
Attaching the Remote Control
To a Vehicle Visor
• Attach the remote control clip to the top of the vehicle visor,
as shown.
Hint: The remote control does not need to be in direct line
with dashboard.
Visor
Remote
Control
4
![](/img.php?id=97498&img=bg5.png)
Child Use with Dashboard Only
• Press the horn on the dashboard to activate the system.
The lights will twinkle.
• When your child presses the horn, you’ll hear a sound
effect. Then, your child will enjoy one soothing lullaby or
entertaining song along with twinkling lights and a sound
effect.
Care
Back View
Front View
Curved Edge
• Once cleaned and dried, unfasten the fasteners on the
underside of the cover.
• Position the plastic unit so that the curved edge is toward
the curved edge of the cover.
• Fit the plastic unit into the cover. Re-fasten the cover
fasteners closed.
• Turn the dashboard upright. Fit the four lenses on the
plastic unit through the four holes in the cover.
Back View
• Remove the plastic unit before washing the fabric
dashboard cover.
- Unfasten the fasteners on the back of the cover.
- Remove the plastic unit from the cover.
• Re-fasten the fasteners on the cover before washing. The
cover is machine washable. Wash the cover separately in
cold water on the gentle cycle. Do not use bleach.Tumble
dry on low heat.
• Do not immerse the plastic unit.
Plastic Unit
Cover
Fasteners
5
Remove the Plastic Unit for Washing
Replace the Plastic Unit for Use
Lenses
Holes
![](/img.php?id=97498&img=bg6.png)
Consumer Information
One (1) Year
Limited Warranty
FCC Note (United States Only)
Hints
If you have any questions about this product:
In Canada, call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
In Great Britain, telephone 01628 500303.
In Australia, Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1-800-800-812 (valid only in Australia).
Questions? We’d like to hear from you!
Call Fisher-Price®Consumer Affairs, toll-free at 1-800-432-KIDS,
8 AM - 5 PM EST Monday through Friday. Hearing-impaired
consumers using TTY/TDD equipment, please call
1-800-382-7470. Or, write to: Fisher-Price®Consumer Affairs,
636 Girard Avenue, East Aurora, New York 14052.
Car Seat Dashboard
Model Number: 71924
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Car Seat Dashboard
Consumer Affairs Department
636 Girard Avenue
East Aurora, New York 14052
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician
for help.
Fisher-Price, Inc., a subsidiary of Mattel, Inc.
East Aurora, New York 14052, U.S.A.
©2000 Mattel, Inc. All Rights Reserved. Printed in China
® and ™ designate U.S. trademarks of Mattel, Inc. 71924pr-0920
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, New York
14052 warrants that Car Seat Dashboard with Remote
Control is free from all defects in material and workmanship
when used under normal conditions for a period of one (1)
year from the date of purchase.
Should the product fail to perform properly, we will repair
or replace it at our option, free of charge. Purchaser is
responsible for shipping the product to Consumer Affairs
at the address indicated above and for all associated freight
and insurance cost. Fisher-Price, Inc. will bear the cost of
shipping the repaired or replaced item to you. This warranty
is void if the owner repairs or modifies the product. This
warranty excludes any liability other than that expressly
stated above including but not limited to any incidental or
consequential damages.
SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION
MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY
VARY FROM STATE TO STATE.
• If you will not use this toy for an extended period of time,
we recommend turning power completely off. Simply slide
the power/volume control switch on the back of the
dashboard to off . Be sure to follow the set-up
instructions, and turn power back on for future use.
• If sound or lights become faint or stop, it’s time for an adult
to replace the batteries!