GIGA BYTE TECHNOLOGY T1000 TOUCH NOTE User Manual
GIGA-BYTE TECHNOLOGY CO., LTD. TOUCH NOTE Users Manual
Users Manual
Copyright © 2010
All Right Reserved - Printed in China
T1000 TouchNote User's Manual
Original Issue: 2010/ 01
This manual guides you through setting up and using your new Netbook PC. Information in the manual has been carefully checked for
accuracy and is subject to change without prior notice.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mecha-
nical, by photocopy, recording, or otherwise, without prior written consent.
Trademarks
Product names used herein are for identication purposes only and may be the trademarks of their respective companies.
Microsoft®, MS-DOS, Windows®, and Windows® Sound System are trademarks of Microsoft Corporation.
Intel®, Atom™ is registered trademarks of Intel Corporation.
Sound Blaster, Sound Blaster Pro are trademarks of Creative Technology.
All other brands or product names mentioned in this manual are trademarks or registered trademarks of their respective companies.
![](/img.php?id=1241334&img=bg2.png)
English
I
Safety Instructions
Use the following safety guidelines to help protect yourself and your
TouchNote.
When Using Your T1000 TouchNote Computer
CAUTION: Do not operate your portable computer for an
extended period of time with the base resting directly on
your body. With extended operation, heat can build up in the
base. Allowing sustained contact with the skin can cause
discomfort or a burn.
• Do not attempt to service the TouchNote yourself. Always follow
installation instructions closely.
• Do not carry a battery in your pocket, purse, or other container
where metal objects (such as car keys) could short-circuit the
battery terminals. The resulting excessive current flow can generate
extremely high temperature and may cause burns to your skin.
• Be sure that nothing rests on your AC adapter's power cable and
that the cable is not located where it can be tripped over or stepped
on.
• While you are using the computer or charging the battery, place the
AC adapter in a ventilated area, like on a desktop or on the floor.
Do not cover the AC adapter with papers or other items that may
prevent ventilation. Also, do not use the AC adapter while it is inside
a carrying case.
• Do not insert objects into the air vent of your TouchNote computer.
Doing so can cause short-circuiting and may result in fire or
electrical shock.
• Use only the AC adapter and batteries that are supplied by your
TouchNote manufacturer. Using other types of battery or AC
adapter may heighten the risk of fire or explosion.
• Incorrectly placed batteries may result in an explosion.
• Replace only with the same or compatible battery recommended by
the manufacturer.
• Please discard used batteries according to the manufacturer's
instructions.
• Before you connect your TouchNote to a power source, ensure that
the voltage rating of the AC adapter matches that of the available
power source.
- 115 V/60 Hz in most of North and South America and some Far
Eastern countries such as South Korea.
- 100 V/50 Hz in eastern Japan and 100 V/60Hz in western
Japan.
- 230 V/50 Hz in most of Europe, the Middle East, and the Far
East.
•IfyouuseanextensioncordwithyourACadapter,ensurethat
thetotalampereratingofalldevicespluggedintotheextension
corddoesnotexceeditstotalcapacity.
• When removing battery from your TouchNote, first turn off the
system, disconnect the AC adapter from the electrical outlet, and
then remove the battery.
• To avoid risk of an electrical shock, do not connect or disconnect
any cables, or perform maintenance or reconfiguration of this
product during a thunderstorm.
• Do not throw batteries into fire, doing so may cause explosion.
Check with local authorities first for battery disposal instructions.
• When setting up your TouchNote for work, place it on a level surface.
• When traveling, do not check your TouchNote as baggage. You can
put your TouchNote through an X-ray security machine, but nev-
er put your TouchNote through a metal detector. If you have your
TouchNote checked by hand, be sure to have a charged battery
ready in case you are asked to turn on your TouchNote.
![](/img.php?id=1241334&img=bg3.png)
English
T1000 TouchNote USER’S MANUAL
II
• When traveling with the hard drive removed from your TouchNote,
wrap the drive in an insulated material, such as cloth or paper. If you
have the drive checked by hand, you may be asked to install the
drive into your TouchNote. Your can have the hard drive checked
through an X-ray machine, but never put the drive through a metal
detector.
• When traveling, do not place your TouchNote in the overhead stor-
age compartment where it could shift around. Do not drop your
TouchNote or subject it to other mechanical shocks.
• Protect your TouchNote, battery, and hard drive from environmental
hazards such as dirt, dust, food, liquids, extreme temperature, and
direct exposure to sunlight.
• When you move your TouchNote in environments where there is a
substantial difference of temperature or humidity level, condensa-
tion may form on or within your TouchNote. To avoid damaging your
TouchNote, please allow sufficient time for the moisture to evapo-
rate before continue using.
NOTICE:WhentakingyourTouchNotefromacoldertoawarmeren-
vironmentorviceversa,allowyourTouchNoteenoughtimetoadapt
to the new environment before turning on power.
• When unplugging the power cord, please make sure that you pull
on its connector or on its strain relief loop, and not on the power
cord itself. As you pull out the connector, please ensure that it is
pulled out evenly in order not to bend its connecting pins. Also, be-
fore you connect the power cord, make sure that both connectors
are correctly oriented and aligned.
• Before you clean your TouchNote, turn it off first, unplug it from its
power source, and remove the battery.
• Handle interior components with care. When removing a compo-
nent, please hold it by the edge and not on the connecting pins
(such as the memory module).
When using your telephone equipments, safety instructions
should always be followed in order to prevent re, electrical
shock or injuries, these instructions include:
• Do not use this product near water, for example, near a
bathtub, washing basins, kitchen/laundry sinks, wet base-
ments or swimming pools.
• Avoid using cordless phones during an electrical storm as
lightening may cause electrical shocks.
• Do not use the telephone to report a gas leak within the
leakage area.
WARNING: Void of Warranty
* If the battery is not properly handled, there may be a risk of
explosion; make sure you are using the same or compatible
battery.
* Please discard used batteries according to the instructions
given by the manufacturer.
* Please be aware that use of cracked, severely scratched or
poor quality discs may damage the optical drive and corrupt
data in the disc. Such discs may break while drive operates
in high-speed, in this case, your product warranty may be vo-
ided.
![](/img.php?id=1241334&img=bg4.png)
English
III
Regulatory Notices
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits
for a Class B digital service, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
Any changes or modications made to this equipment may void the
user’s authority to operate this equipment. This equipment gener-
ates, uses, and can radiate radio frequency energy. If not installed
and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television re-
ception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one
or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiv-
er.
● Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for
help.
● All external cables connecting to this basic unit must be
shielded.
For cables connecting to PCMCIA cards, see the option
manual or installation instructions.
RF exposure
This equipment must be installed and operated in accordance with
provided instructions and must not be co-located or operating in con-
junction with any other antenna or transmitter. End-users and install-
ers must be provide with antenna installation instructions and trans-
mitter operating conditions for satisfying RF exposure compliance.
SAR Value:0.660 W/Kg
Canada Warning
"Industry Canada regulatory information Operation is subject
to the following two conditions:
(1)this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.""The user is cautioned that this device should be
used only as specified within this manual to meet RF
exposure requirements. Use of this device in a manner
inconsistent with this manual could lead to
excessive RF exposure conditions."
![](/img.php?id=1241334&img=bg5.png)
English
T1000 TouchNote USER’S MANUAL
IV
CE Notice (European Union)
This symbol indicates this T1000 TouchNote computer complies
with the EMC Directive and the European Union’s Low Voltage Di-
rective. This symbol also indicates that T1000 meets the following
technical standards:
• EN 55022 — “Limitations and Methods of Measurement for the
Radio Interferences of Information Technology Equipment.”
• EN 55024 — “Information technology equipment - Immunity char-
acteristics - Limits and methods of measurement.”
• EN 61000-3-2 — “Electromagnetic compatibility (EMC) - Chapter
3: Limits - Section 2: Limits on the harmonic current emissions
(Equipment input current up to and including 16 A per phase).”
• EN 61000-3-3 — “Electromagnetic compatibility (EMC) - Chapter
3: Limits - Section 3: Limits on the voltage uctuations and icker
in low-voltage power supply systems for equipment with rate cur-
rent up to and including 16 A.”
• EN 60950 — “Safety of Information Technology Equipment.”
NOTE: EN 55022 emissions requirements provide for two
classications
• Class A governs commercial use
• Class B governs residential use
For CB:
• Only use batteries designed for this computer. The wrong battery
type may explode, leak or damage the computer
• Do not remove any batteries from the computer while it is powered
on.
• Don not continue to use a battery that has been dropped, or that
appears damaged (e.g. bent or twisted) in any way. Even if the
computer continues to work with a damaged battery in place, it
may cause circuit damage, which may possibly result in re.
• Recharge the batteries using the notebook’s system. Incorrect re-
charging may make the battery explode.
• Do not try to repair a battery pack. Refer any battery pack repair
or replacement to your service representative or qualied service
personnel.
• Keep children away from, and promptly dispose of a damaged bat-
tery. Always dispose of batteries carefully. Batteries may explode
or leak if exposed to re, or improperly handled or discarded.
• Keep the battery away from metal appliances.
• Afx tape to the battery contacts before disposing of the battery.
• Do not touch the battery contacts with your hands or metal ob-
jects.
Battery Disposal & Caution
The product that you have purchased contains a rechargeable bat-
tery. The battery is recyclable. At the end of its useful life, under
various state and local laws. It may be illegal to dispose of this bat-
tery into the municipal waste stream. Check with your local solid
waste officials for details in your area for recycling options or proper
disposal. Danger of explosion if battery is incorrectly replaced. Re-
place only with the same or equivalent type recommended by the
manufacturer. Discard used battery according to the manufacturer’s
instructions.
![](/img.php?id=1241334&img=bg6.png)
English
V
BSMI Notice (Taiwan Only)
Most TouchNote computers are classied by the Bureau of Stan-
dards, Meteorology and Inspection (BSMI) as Class B information
technology equipment (ITE).
The symbol above must be attached to the product indicating
compliance with the BSMI standard.
![](/img.php?id=1241334&img=bg7.png)
English
T1000 TouchNote USER’S MANUAL
VI
![](/img.php?id=1241334&img=bg8.png)
English
VII Preface
Congratulations on your purchase of a TouchNote computer! Your
new TouchNote features the most innovative features in portable
computing technology. It combines state-of-the-art ergonomics with
sophisticated architecture, providing you with a personal computer
that is compact, powerful, and easy to use. Designed for a wide
range of general, business, and personal productivity applications,
this TouchNote is an ideal choice for use in the ofce, at home, and
on the road.
This Manual contains all the information you need to set up and
use your TouchNote computer. It describes all of its features in a
thorough yet easy-to-read manner.
![](/img.php?id=1241334&img=bg9.png)
English
T1000 TouchNote USER’S MANUAL
VIII
Content
Safety Instructions .............................................................................I
Regulatory Notices .......................................................................... III
Preface ...........................................................................................VII
Chapter 1 Introducing Your T1000 TouchNote
1.1 Panoramic View .......................................................................2
1.2 Left View ..................................................................................3
1.3 Right View ...............................................................................3
1.4 Cover View ..............................................................................4
1.5 Bottom View ............................................................................4
1.6 Status Indicators ......................................................................5
1.7 Turning Your T1000 TouchNote On and Off ...........................6
1.8 Keyboard Functions .................................................................6
1.9 Using the Touchpad ................................................................8
1.10 Using the built-in camera .........................................................8
1.11 Using the Audio ....................................................................... 8
1.12 Using the Wireless LAN (WLAN) .............................................9
1.13 Using the Battery Pack ............................................................9
1.14 Connecting the AC Adapter ................................................... 10
1.15 Installing T1000 Device Drivers .............................................11
1.16 Touch Screen Calibration ......................................................11
1.17 Use your T1000 as a Tablet PC ............................................ 12
1.18 Operating Temperature ......................................................... 12
Chapter 2 Battery
2.1 Battery Pack ..........................................................................14
2.2 Recharging The Battery Pack ................................................14
2.3 Questions And Answers ........................................................14
2.4 Battery Maintenance ..............................................................15
2.5 Power Consumption ..............................................................15
2.6 Reducing Power Consumption .............................................. 15
2.7 Removing The Battery Pack ..................................................16
2.8 Connecting System To AC Adapter .......................................16
2.9 Battery Capacity Inspection ...................................................16
Chapter 3 Introduction to Smart Manager
3.1 GIGABYTE Smart Manager ..................................................18
Chapter 4 Troubleshooting / Q&A
4.1 Troubleshooting .....................................................................20
4.2 Q&A ....................................................................................... 24
Appendix I Specication
Appendix II Recovery Update Notices
Appendix III GIGABYTE Service Information
![](/img.php?id=1241334&img=bga.png)
English
T1000 TouchNote USER’S MANUAL
1
Chapter 1 Introducing Your T1000
TouchNote
This chapter will show you how to operate your T1000 SERIES
TouchNote computer, including connecting the AC adaptor, turning
the computer on/off, using touch-pad, keyboard, hot keys, battery,
and so on. If you are new to computers and to the operating
system, this chapter will guide you through some of the new exciting
features.
![](/img.php?id=1241334&img=bgb.png)
English
2
1.1 Panoramic View
2
6
7
8 1
5
3
4
# Icon Item Description
1Web Camera Web camera for video
communication.
2LCD display Displays computer output.
3Keyboard For entering data into your
computer.
4LED indicators
Show the stats of certain
system components
activities.
5Touchpad
Touch-sensitive pointing
device which functions like
a computer mouse.
6
Num. Lock ,
Caps Lock &
3.5G LEDs
Num. Lock, Caps Lock & 3.5G
LED lights.
(Please refer to
the detailed descriptions of
the LED indicators on Page 5
of the User's Manual.)
7Microphone Internal microphone for
sound recording.
8Stylus Pen Slot The slot places Stylus Pen
![](/img.php?id=1241334&img=bgc.png)
English
T1000 TouchNote USER’S MANUAL
3
1.2 Left View
1 2 3 4 65
# Icon Item Description
1
External
display (VGA)
port
Connects to a display device such as
external monitor and LCD projector.
2USB2.0 port
Connects to USB devices such as
USB mouse, USB printers and USB
external HDD.
3Air vent To vent excess heat from the Netbook.
4Function Key
To activate the function key
a). The Battery capacity can be
displayed when the battery is loaded
and the function button is pressed in
shutdown/standby/hibernate mode.
b). In the Windows 7 Starter system:
turn on/off the Smart Manager
program.
5Headphone
jack
Connects to audio line-out devices
such as speakersand headphones.
6Microphone
jack
Accepts inputs from external
microphones.
1.3 Right View
1
23 4 5 6 7
# Icon Item Description
1Multi card
reader
Accepts SD/MMC/MS/MS Pro
memory cards.
2Express Card
slot Accepts Express Card.
3
eSATA/
USB2.0 combo
port
The combo port doubles as an
eSATA and a USB port allowing
USB devices and external Hard
Drives to be connected using just
one port.
4USB 2.0 port
Connects to USB devices such
as USB mouse, USB printers and
USB external HDD.
5Power button Turns the computer on and off
6Ethernet port Connects to an Ethernet
10/100/1000 based network.
7DC-in jack Connects to an AC adapter.
![](/img.php?id=1241334&img=bgd.png)
English
4
1.4 Cover View
1
2
# Icon Item Description
1Cover To Protect the T1000 TouchNote
2Axle To rotate the LCD Panel
1.5 Bottom View
2
1
43
# Icon Item Description
1Battery Computer battery pack.
2Speaker Deliver stereo audio.
3Kensington
Lock
Connects to a Kensington-
compatible computer security
lock.
4SIM Card Slot To insert of a mobile SIM card
for 3.5G function. (Optional)
![](/img.php?id=1241334&img=bge.png)
English
T1000 TouchNote USER’S MANUAL
5
1.6 Status Indicators
Icon Item Function
Bluetooth status
LED
Indicates when the Bluetooth
device is active.
Wireless LAN
status LED
Indicates when the WiFi LAN
device is active.
HDD status
LED
Indicates when the hard disk drive
is active.
Battery status
LED
Flash when charging, and off when
the battery is full.
Power status
LED
Indicates the computer’s power
status.
1Number-locked The keyboard is in Number-lock
mode.
Caps-locked The keyboard is in Caps-lock mode.
3.5G WWAN on/off status.
![](/img.php?id=1241334&img=bgf.png)
English
6
1.7 Turning Your T1000 TouchNote On and Off
Turning on the power
Open the T1000 TouchNote lid and slide the power switch to the left
for one or two seconds. The power indicator will glow blue once the
computer is powered on.
Turning off the power
If you are not going to use your T1000 TouchNote computer for a
while, it is best to turn off its power. Before turning off power, close
all open programs rst and shut down the operating system.
After turning off your T1000 TouchNote computer, make it a habit
to leave the LCD panel open for a while after it has been used for
an extended period of time. This allows the interior of your T1000
TouchNote computer to cool off. Closing the panel will force the
heat up against the LCD screen, and doing so can cause lasting
damage the screen. More importantly, never close the LCD panel
for a long period of time when the computer is on or when the power
saving function is disabled.
1.8 Keyboard Functions
T1000 TouchNote computer is equipped with a standard typewriter-
layout keyboard and has extra features.
Icon Description
Caps Lock Press Caps Lock to set all the characters input
are capital letters.
Num Lk To turn on the numeric keypad overlay, press
Num Lk.
Fn+Scrl Lk Press this key to scroll the screen under some
programs.
Press this key to activate Windows® START
menu.
Press this key to function as the right key of
mouse.
![](/img.php?id=1241334&img=bg10.png)
English
T1000 TouchNote USER’S MANUAL
7
Fn Combination Keys (Hot Keys)
Use Fn key combined with other keys to activate, close or set
special functions. These combinations are also called Hot Keys. To
use the Hot Keys, press and hold down <Fn> together with the keys
described below:
Hotkey Function Description
Fn+F1 Sleep Enable the computer into Sleep
mode.
Fn+F2 Wireless
LAN
Enables/disables the Wireless LAN
function.
Fn+F3 Brightness
down Decrease the screen brightness.
Fn+F4 Brightness
up Increases the screen brightness.
Fn+F5 Display
toggle
Switches display output between the
display screen, external monitor (if
connected) and both.
Fn+F6 Touchpad
toggle
Turns the internal touchpad on and
off..
Fn+F7 Speaker
toggle Turns the speaker on and off.
Fn+F8 Volume
down Decreases the sound volume.
Fn+F9 Volume up Increases the sound volume.
Fn+F10 3G Enables/disables the 3G function.
Fn+F11 Bluetooth Enables/disables the Bluetooth
function.
![](/img.php?id=1241334&img=bg11.png)
English
8
1.9 Using the Touchpad
The built-in touch pad is a PS/2-compatible pointing device that
senses movement on its surface. This means the cursor responds
as you move your nger on the surface of the touchpad. The central
location on the palm rest provides optimum comfort and support.
The following explains how to use the touch pad:
Move your nger across the touch pad to move the cursor.
Press the left and right buttons located on the edge of the
touch pad to do selection and execution functions. These two
buttons are similar to the left and right buttons on a mouse.
Tapping on the touch pad produces similar results.
1.10 Using the built-in camera
The Web Camera is an embedded camera that is used to capture
video, take still images and to do video conference calls or person
to person video chat. Programs like Windows Live Messenger take
advantage of web cameras, otherwise known as webcams.
•••••••••••••••••••••••
Tips: For using the built-in camera, see the help le on the
utility software.
•••••••••••••••••••••••
Tips: The built-in camera cannot be shared by more than
on software application. If another application is using
the camera, exit the application before using the built-in
camera.
1.11 Using the Audio
You can Control volume under your Windows operation system:
Click the volume icon on task bar and use the button to adjust
volume.
Or you can double click the volume icon to activate Volume
Control to adjust control items of volume.
•••••••••••••••••••••••
Tips: You can use Fn combination keys to adjust volume.
Please refer to “FN combination keys”.
Please adjust the voice down before your connect an
external audio equipment, such as earphone or MIC.
![](/img.php?id=1241334&img=bg12.png)
English
T1000 TouchNote USER’S MANUAL
9
1.12 Using the Wireless LAN
You can use Wireless LAN to connect to the network and use the
Internet in your home and ofce, so there is no need anymore to
pull cables or wires.
Connecting and using the wireless network
You can use the Function key (1.8 Using the Launch Keys) or Fn
combination keys (1.8 Keyboard Function) to turn on wireless Lan.
Right-click the Wireless network icon on the Taskbar and select View
available wireless network.
Select AP (Access Point) you want to connect to and type necessary
information. Click Connect. And If you place the mouse pointer on
the Wireless network icon on the Taskbar, you can see the status of
the wireless network.
•••••••••••••••••••••••
Tips: You can learn details by referring to instruction
documentation for your wireless network.
•••••••••••••••••••••••
The availability of the functions depends on the
conguration of T1000 TouchNote you bought, see the Spec
to see whether your model supports the function.
•••••••••••••••••••••••
Notice: Creating security settings for the wireless LAN is
important, we assume no responsibility for any security
problems that may arise from the use of the wireless LAN.
1.13 Using the Battery Pack
T1000 TouchNote computer is designed to operate with one of the
following power sources:
AC power (using the AC adapter connected to an electrical
outlet)
Lithium-Ion (Li-Ion) battery pack
You should use the AC adapter whenever possible; use the battery
pack only when AC power is unavailable. The rechargeable Li-Ion
battery pack allows you to operate your T1000 TouchNote computer
without an external power source. When you use the AC adapter
to connect your T1000 TouchNote to a power outlet, the internal
battery will begin to recharge. While the battery is charging, the
Battery Charge icon on the indicator panel will be on. Once the
battery is fully charged, the Battery Charge icon will turn off.
Operating video, or audio equipment can increase the use of
your computer’s power.
Decreasing monitor brightness can also save power.
When the battery is not fully charged, allow your battery to be
charged completely before using it (i.e., before disconnecting AC
power).
The battery will not be charged when remaining battery is higher
than 95% (The battery will be charged to 100% when remaining
battery is less than 95%).
Li-Ion Battery is vulnerable; do not charge it with other power
adapter, otherwise re or explosion may occur.
![](/img.php?id=1241334&img=bg13.png)
English
10
Replacing the Battery
The battery will gradually weaken over time. We recommend that
you replace your battery when you notice a signicant decrease of
battery capacity.
To change the battery pack, follow the steps below:
1. Turn off the computer.
2. Close the lid and ip the computer over.
3. Slide the battery latch. Continue to hold it until the battery is
removed.
4. Make sure the replacement battery is properly oriented before
inserting it into the battery compartment.
Maintenance of the AC Adapter
Do not connect the adapter to any other device.
Do not step on the power cord or place heavy objects on top of it.
Carefully route the power cord and keep cables away from all trafc.
When unplugging the power cord, do not pull on the cord itself but on
the plug instead.
If you are using an extension cord, make sure that the devices
plugged onto the cord do not exceed its total capacity. Furthermore,
the devices plugged into the electrical outlet shall not exceed the fuse’
s total ampere rating.
Please verify power voltage before connecting the electrical cord to
the power outlet. If you are uncertain of its power specication, please
consult with your local vendors or power company for more details.
1.14 Connecting the AC Adapter
The AC adapter converts AC power to DC power and reduces the
voltage supplied to the computer. It can automatically adjust to
any voltage from 100 to 240 volts and outputs power at 12V/19V,
allowing you to use your T1000 TouchNote computer in almost any
region.
CAUTION: Use only the AC adapter and the power cord we
recommend. Using the wrong adapter may damage your computer.
We assume no responsibilities for damages arising from misuse of
AC adapters.
1
3
2
To properly connect the adapter, follow the steps as below:
1. Connect the power cord to the AC adapter.
2. Connect the AC adapter to the DC power port of your computer.
3. Connect the AC adapter power cord to an AC outlet.
![](/img.php?id=1241334&img=bg14.png)
English
T1000 TouchNote USER’S MANUAL
11
1.15 Installing T1000 Device Drivers
If your T1000 TouchNote Computer already has an operating
system installed, it is best to install all necessary device drivers in
order for the hardware to properly function.
Before installing drivers, check with your vendors to see if they have
already installed all the drivers with the operating system, if not,
please follow the steps below:
1. You can nd the Utility Driver CD like the one shown below:
2. Place the CD into external CD RW or DVD RW Drive.An Auto
Run installation screen will appear.
1.16 Touch Screen Calibration
The stylus pen together with the system touch-screen LCD display
provides you a touch-screen operation by emulating the industry
standard mouse left click. Below are the two conditions that you
need to calibrate your touch-screen.
• The rst time Windows is installed and boot up. The active cursor
is shifted; not exactly the same position where the stylus pen tip is
tapped.
• Periodically when you nd the active cursor is shifted away from
the screen position where the stylus pen tip is tapped.
To calibrate the touch-screen, please select the Calibrate function in
Smart Manager. (Please refer to Chapter 3 for more information)
![](/img.php?id=1241334&img=bg15.png)
English
12
•••••••••••••••••••••••
Note: You need to set screen display resolution to right
resolution 1366x768 or 1024x600 (depends on your
hardware specication) before proceeding with the
calibration.
1.17 Use your T1000 as a Tablet PC
The screen of T1000 is convertible to simulate a Tablet PC. Follow
the steps to use this function.
1. Open the lid (the screen display)
of T1000.
2. On the top center above the
keyboard is the pivot connecting
the display panel to the bottom
case. There is a sign " "
3. Follow the sign to turn the screen
clockwise up to 180 degree so
that the screen is facing out.
4. Lay the turned screen down into
the flat position. The keyboard
will be covered by the display.
Use the stylus or simply touch
the screen to operate T1000 as
a Tablet PC.
5. When done with Tablet PC,
reverse the above instruction
(erect the screen to 90 degree,
turn counterclockwise to 180
degree) to set T1000 back to
original position.
* Attention: Please note that the screen can only rotate at 180
degree clockwise. Be sure to turn the screen according to the sign.
Forcing the screen to turn at the wrong angle will cause serious
damage to the the T1000.
1.18 Operating Temperature
Operating Temperature : 10ºC to 40ºC
![](/img.php?id=1241334&img=bg16.png)
English
T1000 TouchNote USER’S MANUAL
13
Chapter 2 Battery
![](/img.php?id=1241334&img=bg17.png)
English
14
2.1 Battery Pack
Your T1000 TouchNote is equipped w i t h a high-energy
rechargeable Lithium Ion (Li-Ion) battery pack. Battery life will
vary depending on the product configuration, product model,
applications loaded on the product, power management settings of
the product, and the product features used by the customer. As with
all batteries, the maximum capacity of this battery will decrease
with time and usage.
2.2 Recharging The Battery Pack
Your T1000 TouchNote supports both on-line and off-line recharge.
Follow the procedure below to recharge battery:
Make sure the battery pack is installed in the T10 00
TouchNote.
Connect the AC adapter to the T1000 TouchNote and to an
electrical outlet.
When a battery pack is being recharged, its battery LED (located
at the upper left corner of LCD display) should be lit. For details
on the LEDs, please refer to Chapter 1.6. When the T1000
TouchNote is OFF, a depleted Li-Ion battery will take three
hours to recharge.
2.3 Questions And Answers
I can feel a mild heat next to the battery pack. Is it normal?
The battery will generate heat during recharging and
discharging. There is a protection circuit inside the T1000
TouchNote to prevent overheating. User needs not to worry.
My battery operation time is not as long as it should be.
Why?
The battery is heat sensitive and can only be charged to its
maximum if the battery and its environmental temperature
remain within 15-25°C (59-77°F). The more the temperature
deviates from this range during recharging, the less chance
there is for the battery to be fully charged. In order to
recharge the pack to its full capacity, users are requested
to cool down the unit by unplugging the AC Adapter. Wait
until it is cooled down. Then plug in the AC Adapter to start
recharging again.
I did not use my spare battery for a few days. Even though
it was fully recharged, there wasn’t as much power left as a
newly charged one. Why?
The batteries will self-discharge when they are not being
recharged. To make sure a battery pack is fully charged,
recharge before use. Always keep the battery inside the
T1000 TouchNote and have the AC adapter connected
whenever possible.
![](/img.php?id=1241334&img=bg18.png)
English
T1000 TouchNote USER’S MANUAL
15
I did not use my spare battery for months. I have problem in
recharging it.
If you happen to leave your battery pack to go through an
extended period of self-discharge, say more than three
months, the battery voltage level will become too low and
needs to be Pre-Charged (to bring the battery voltage level
high enough) before it automatically (for Li-Ion only) resumes
its normal Fast Charge.
2.4 Battery Maintenance
To maintain the battery pack's maximum capacity, you should
occasionally let the T1000 TouchNote deplete its battery power
completely before recharging.
To carry out a complete depletion of the battery, disconnect the AC
adapter and let your T1000 TouchNote consume the remaining
battery power. To speed up the depletion, use the HDD as much as
possible. When the battery is empty, wait for the T1000 TouchNote
to cool down (especially the battery). The temperature should be
within 15-25°C (59-77°F). Then insert the AC adapter to recharge
the battery.
2.5 Power Consumption
The Windows™ operating system has incorporated the latest
state-of-the-art ACPI (Advanced Conguration Power Interface)
power management methodology. In order to fully utilize the
power of your battery packs, it would be a good idea for you to
spend sometime to acquire a basic understanding of the power
management concept from your operating system.
In Windows™ Operating Systems, you can go through Power
Options of the Control Panel according to the version of
Windows™ Operating System the T1000 TouchNote applies.
We shall not describe them in details.
2.6 Reducing Power Consumption
Although your T1000 TouchNote (together with the operating
system) is capable of power conservation, there are measures you
can take to reduce the power consumption:
Use the AC power whenever possible.
Try to use the HDD drive to read and write les, instead of
using the external USB FDD.
Disable unused devices, such as Web Cam, WLAN, Bluetooth®,
and etc.
Decrease LCD panel brightness through Windows.
Note: Whenever system is powered on or powered off, make sure
the battery pack is installed in the battery pack compartment.
![](/img.php?id=1241334&img=bg19.png)
English
16
2.7 Removing The Battery Pack
This battery pack can easily be removed and replaced. Make sure
that the computer is properly shutdown before changing the battery
pack. If you would like to change the battery pack while power is
on, make sure this battery pack is not the only electrical source to
the system unit. Follow the steps below to remove the battery pack.
1
2
Make sure the system is properly shutdown.
Flip the system upside down as shown.
Push the battery lock to the unlock position as shown by #1.
Remove the battery pack as shown by #2.
To insert the battery pack, reverse the steps above.
2.8 Connecting System To AC Adapter
Connect A C
adapter to system
unit as shown by #1.
Connect AC power cord
to AC adapter as shown by #2.
Connect other end of power cord to
an electrical outlet as shown by #3.
2.9 Battery Capacity Inspection
When system is turn off, press the function key (Please refer to 1.2)
to inspect the battery capacity.The LED indicators will show the
battery capacity status.
The LED indicators will show the battery capacity status as
following:
5 LED indicators on: Battery capacity 100%
4 LED indicators on: Battery capacity 80%
3 LED indicators on: Battery capacity 60%
2 LED indicator on: Battery capacity 40%
1 LED indicator on: Battery capacity 20%
1 LED indicator ashing: Low battery capacity
1
3
2
![](/img.php?id=1241334&img=bg1a.png)
English
T1000 TouchNote USER’S MANUAL
17
Chapter 3 GIGABYTE
Smart Manager
![](/img.php?id=1241334&img=bg1b.png)
English
18
3.1 GIGABYTE Smart Manager functions
Due to variations of Smart Manager versions, the interface, icons,
sequence and functions might be different comparing to the guide.
Battery Status:
The Battery icon with capacity status will be
shown on the screen after the battery is placed.
AC-IN:
The AC-IN icon will be shown on the screen once the AC
Adapter is plugged in. The battery icon will be shown on
the screen when using battery as the main power source.
Volume control:
Press the volume control icon to adjust the volume
level.
Mute:
Press the mute icon to enable/disable the mute mode.
Brightness:
Press the brightness icon to adjust the level of the
display backlight brightness.
Power mode:
Press the power mode icon to select different power
management mode.
Wireless LAN:
Press the Wireless LAN icon to enable/disable
Wireless LAN connectivity.
Bluetooth:
Press the Bluetooth icon to enable/disable Bluetooth
radio.
3G:
Press the 3G icon to enable/disable 3G device.
(Optional)
![](/img.php?id=1241334&img=bg1c.png)
English
T1000 TouchNote USER’S MANUAL
19
Camera:
Press the camera icon to turn on/off Webcam power.
Smart Charge
Press the Smart Charge icon to select the USB power
supplying mode under Sleep Mode when using battery
as the main power source *. (Optional)
Screen Rotation:
Press the screen rotation icon to rotate the display
direction.
Touch Screen Setting:
Press the touch panel icon to adjust touch panel
settings.
Calibration:
Press the calibration icon to calibrate the touch screen.
*The Introduction of GIGABYTE Smart Charge function
The GIGABYTE Smart Charge function allows you to charge
external devices (that support USB charging) through USB port
while the computer is in Sleep Mode.
The USB port will continue supplying power in Off/Sleep/Hibernation
Mode when using AC power as the main power source. However,
the USB port will only be able to supply power in Sleep Mode when
using battery as the main power source. To ensure there is enough
power to operate the system, you can disable the power supplying
function by select different Smart Charge options (Smart Charge
allows to disable power supplying when battery capacity is lower
than 30%, 40% or 50%). (This function is only available in some
specic models)
![](/img.php?id=1241334&img=bg1d.png)
English
20 Chapter 4 Troubleshooting / Q&A
This chapter contains advice and solutions to a few basic troubles
you might encounter when you use T1000 TouchNote. Please refer
to this chapter and follow the instructions to solve troubles.
![](/img.php?id=1241334&img=bg1e.png)
English
T1000 TouchNote USER’S MANUAL
21
•••••••••••••••••••••••
Warning: Under the condition that you can’t handle trouble,
please refer to your dealer to get professional service.
AC Adapter
Trouble Solution
No power
supplies to T1000
TouchNote
Make sure the AC adapter is well connected to
the power source and T1000 TouchNote.
Check the cable and plug to make sure they
are OK. If they are broken, please contact your
local dealer ASAP.
Battery pack
Trouble Solution
No power supplies
to T1000 Touch-
Note
The remaining power in battery pack may be not
enough to power on the machine. Connect AC
Adapter to recharge it.
Can’t be recharged
after connecting
AC Adapter
Check temperature of battery pack’s surface.
Battery pack can’t be recharged if its tempera-
ture is too high or too low. Recharged it after
its temperature is the same with the normal
environment one.
If battery pack is fully discharged, it won’t be re-
charged at once. Please wait for some minutes.
If the power indicators of battery pack are
always not lit up, its life may be over. Please
contact your dealer to buy another one.
Battery life is not as
long as it should be
Battery life depends on using condition of T1000
TouchNote. You can change the settings in
Power Manager of OS to save power.
Battery pack can’t exert its full capacity if it
works when not fully recharged frequently.
Power T1000 TouchNote by battery pack until
its power drops to a critically low level and the
machine emits a high-pitched beep or displays
a warning message; after that, recharge battery
pack to make battery pack work longer.
WARNING: Please pay attention to the following
information regarding the battery pack:
1.Be sure to recycle the waste batteries.
2.Do not place the batteries near high-temperature
locations, fire source or in burning fire as this may
cause the batteries to explode
3.Do not assemble/disassemble /modify the batteries
without authorization.
4.Use the battery pack provided by the original
manufacturer only. Batteries other than those supplied
by the original manufacturer may damage the device.
Keyboard
Trouble Solution
Press character keys
but number displayed
instead of character
Check if Num Lock is activated.
Confusing display Make sure there is no software to cong-
ure the keyboard.
4.1 Troubleshooting
![](/img.php?id=1241334&img=bg1f.png)
English
22
WARNING: Please pay attention to the following information about
keyboard maintenance.
1.Dust build-up may occur to the keyboard after long-term use.
It is recommended to clean the keyboard with a small brush.
Please shut down the machine before cleaning the surface of
the keyboard and wipe it with a soft cloth dipped in cleaner or
water gently.
2.In case any liquid enters the keyboard, shut off the power
supply immediately, remove the batteries and contact the
original manufacturer directly for repair. Do not disassemble the
keyboard yourself for repair.
Hard disc drive (HDD)
Trouble Solution
HDD can’t be
booted
The operating system is corrupted by incorrect
operation or virus. Try to clean virus and then
congure your operating system correctly.
Maybe the documents of your OS run in error;
please refer to the manual of your OS.
HDD performs very
slowly
There is too much le fragment. Use disk
defrag tools to rearrange the programs on the
hard disk.
WARNING: Please pay attention to the following information about
Hard Drive maintenance.
1.The hard disk is a high-speed data storage device. Avoid using
the TouchNote in unstable locations as far as possible to prevent
hard disk damage and data loss.
2.Please use the computer in accordance with normal startup/
shutdown procedures; improper startup/shutdown may shorten
the service life of the hard disk.
Printer
Trouble Solution
The data can’t be
output from T1000
TouchNote to
printer
Make sure printer is powered on.
Make sure its cable is OK and its USB interface
is well connected to T1000 TouchNote.
Make sure your printer is compatible to your
T1000 TouchNote.
Error printing Please refer to the user’s manual of your
printer for help.
LAN
Trouble Solution
Can’t be connected Be sure the RJ45 connector is rmly connected
to the Network Hub or Switch.
USB
Trouble Solution
Equipments
connected can’t
work
Check and be sure USB port of T1000
TouchNote is rmly connected with the USB
cord of the equipment.
Be sure the driver of the equipment is installed
correctly.
![](/img.php?id=1241334&img=bg20.png)
English
T1000 TouchNote USER’S MANUAL
23
LCD
Trouble Solution
The screen is
blank
Press hot key Fn + F5 to change the display
mode if certain external monitor is connected.
Make sure the system isn’t in the mode of
Hibernation or Standby.
WARNING: Please pay attention for below matters at
mounting design of touch panel of LCD module.
1.Do not put a heavy force along the edge of active area
2.Do not put a heavy shock or stress on the touch panel
and lm surface.
3.Do not put heavy goods on the touch panel.
4. The touch control LCD screen is the most fragile
component of the TouchNote and is prone to rupture
under external forces. Do not place any object on the
keyboard or between the keyboard and the screen to
prevent damage to the LCD screen.
5. When traveling with Gigabyte T1000 TouchNote, place
it in a special case in a tidy manner as far as possible.
Excess objects may squeeze the machine and therefore
damage the LCD screen.
6. Do not touch the screen with sharp objects or fingers
directly.
7. It is recommended that the LCD screen be wiped with a
special screen cleaning cloth. Wipe the screen gently to
avoid breakage of the screen.
8. Prevent any liquid from entering the LCD screen as this
may damage the elements of the LCD screen.
Audio
Trouble Solution
No sound emitted
Adjust sound controller.
Check the setting of sound volume of software.
Check if the ear phone is rmly connected.
Check the Devices Manager of Windows. Be
sure the Sound function has been activated
and isn’t interfered with other hardware.
Sleep / Hibernation
Trouble Solution
Can’t enter
into Standby/
Hibernation
Please check if the Windows Media Player is
running. If Yes, the T1000 TouchNote can’t
enter into Standby or Hibernation mode.
Please close Windows Media Player.
![](/img.php?id=1241334&img=bg21.png)
English
24
4.2 Q&A
My computer switches to hibernation mode much too quickly,
and I have to constantly hit a key or move the mouse to bring
back the screen. What can I do?
This is part of Windows Power Management. Access Power
Management by clicking on Start / Control Panel / Performance
and Maintenance / Power Options, and change the time next to
the “Turn off monitor” option to the time you want. You have the
choice of either adjusting time for the power supply or for the
battery.
I’ve heard that cleaning and rearranging les on the hard drive
will improve program’s launch speed, how do I do that?
Good disk maintenances can improve program launch
speed. This normally includes deleting unnecessary files, and
defragmenting hard disk so that files can be more efficiently
grouped. Windows contains maintenance utilities for these
tasks; run Disk Cleanup to remove unnecessary files, and
Disk Defragmenter to defragment file blocks. For more
information about these utilities, please refer to your Windows
documentation.
What kind of external microphone can I use with my notebook
computer?
You will need to use a self-amplifying microphone.
There are echoes coming from my speakers. What can I do?
Double click on the Speaker icon on the task bar. Then, under
Microphone Balance, check the Mute box.
Because of a software problem, I was unable to shut the
computer down from Windows, I pressed the power button to
power off the computer, but it didn’t work. How can I force a
power off?
Make sure you press the power button for at least 4 seconds.
Normally, this will force the computer to shut off.
Why can’t I charge the battery of my portable computer after it
was out of use for some time?
After your portable computer has not been used for a long time
(say, more than a month), the battery will enter into low voltage
protection mode. Under this circumstance, restoring to normal
voltage will require the battery to be slowly charged for several
hours. Once the battery has been fully charged, your computer
will resume to normal operation.
![](/img.php?id=1241334&img=bg22.png)
English
T1000 TouchNote USER’S MANUAL
25
My computer says: “CMOS Battery Low”, what should I do?
If your computer is without power (i.e. unplug the computer
power source from the power outlet and remove the battery
pack from it) for over 45 days, you would lose the information
stored in CMOS.
Please follow the steps below to reconfigure your CMOS
settings:
1. Press F2 to enter into the BIOS setup utility.
2. Select “Load Optional Defaults?”. When you see the
following prompt, choose <OK> and then press <Enter>.
3. Select “Save Changes and Exit”, select <OK> and press
<Enter> to restart your computer.
How to unplug or eject devices
1. In the notication area next to your task bar, double-click the
Safe Removal icon. Safe Removal displays a list of Plug and
Play devices that support safe removal and that are currently
attached to the system.
If you do not see the Safe Removal icon, your device does
not support safe removal, and you cannot unplug or eject
your device using Safe Removal.
2. In Safely Remove Hardware, in the list of devices, select the
device that you want to unplug or eject, and then click Stop.
This tells the system that you will be unplugging or ejecting
the device.
3. In Stop a Hardware device, click OK.
A notication appears stating that it is now safe to unplug or
eject the device.
Caution
• Unplugging or ejecting a device that supports safe removal
without first using the Safe Removal application to warn the
system can cause data to be lost or your system to become
unstable. For example, if you use Safe Removal, however,
you can warn the system before you unplug or eject a device,
preventing possible loss of data.
Note
• For removable storage devices that can safely be removed while
the system is on, the system disables write caching by default.
It does this so the devices can be removed without loss of data.
When write caching is disabled, however, the system will likely
experience slower performance, so be sure to enable write
caching when you have nished removing the device.
Does T1000 provide a hardware switch or function button to
enable/disable the Bluetooth function?
T1000 provides a combined function button to enable/disable
the 3G (Fn+F10) and Bluetooth (Fn+F11) functions.
(3G is optional)
![](/img.php?id=1241334&img=bg23.png)
English
26
What are the considerations for the use of the touch control
screen?
In accordance with the principle of panel structure, the
surroundings of the touch control panel are highly sensitive.
Hence, drawing lines along the surroundings of the chassis
is strictly prohibited as this may damage the Pet/film due to
extreme pressure or cause the internal liners/pads on the edges
of the outer shell to displace, therefore squeezing the edges of
the touch control screen and causing the screen to fail.
What is the capacity of SDHC card that T1000 can support?
The specication of SDHC that T1000 SD card reader supports
shall be in accordance with that of the SD Association. Currently,
the maximum capacity announced by SD Association is 32GB
http://www.sdcard.org/developers/tech/sdhc/
How can T1000 be upgraded in the DOS and Windows mode?
Please refer to how to upgrade T1000 in the DOS and Windows
mode??
![](/img.php?id=1241334&img=bg24.png)
English
T1000 TouchNote USER’S MANUAL
27
Appendix I Specications
![](/img.php?id=1241334&img=bg25.png)
English
28
Specications
CPU Intel® Atom™ Processor
OS Microsoft® Windows®7 Compliance
LCD 10.1” HD Ready TFT-LCD Touch Panel, WXGA 1366x768, with LED back-light
System Memory DDRII SO-DIMM
Chipset Intel® NM10 Express Chipset
Video Graphics Intel® GMA 3150
Hard Disk Drive 2.5” 9.5mm SATA HDD 5400rmp
I/O Port USB(2.0)*2, eSATA/USB Combo, D-sub, RJ45, Mic-in, Earphone-out, 4-in-1 Card
Reader (SD/MMC/MS/MS Pro), Express Card Slot, DC-in Jack
Audio 1.5Watt Speaker*2, Internal Microphone
Communications
LAN
Wireless LAN
Bluetooth
10/100/1000Mbps Ethernet
802.11b/g/n Wireless
Bluetooth V2.1 + EDR
HSDPA (3.5G) HSDPA Antenna build-in, HSDPA Module supported (Optional)
Webcam 1.3 MegaPixel Webcam
Security Kensington Lock
Battery Li-ion 4 cell, 32.4Wh, 4500mAh
Li-ion 6 cell, 56.61Wh, 7650mAh
Dimensions 265(W) x 195(D) x 38.5(H) mm (including 4 cell battery)
265(W) x 214(D) x 41.4(H) mm (including 6 cell battery)
Weight ~1.3kg (including 4 cell battery)
~1.48kg (including 6 cell battery)
![](/img.php?id=1241334&img=bg26.png)
English
T1000 TouchNote USER’S MANUAL
29
![](/img.php?id=1241334&img=bg27.png)
English
30 Appendix II Recovery Update
Notices
![](/img.php?id=1241334&img=bg28.png)
English
T1000 TouchNote USER’S MANUAL
31
GIGABYTE Xpress Recovery
System Recovery - Restore your T1000 Operating System
The hard drive of the T1000 has a hidden partition that contains
a full backup image of the operating system that can be used to
recover the system in the event that something happens to the
operating system.
If the hard drive is removed or the partition deleted, the
recover options will no longer be available and a recovery
service will be needed.
Launch System Recovery
The System Recover feature is part of the notebook installation and
it ships preset from the factory. The Options menu allows you to
launch the Windows Recovery tool to reinstall the operating system
to factory defaults.
Below will briey describe how to launch the Recovery Tool and to
get the recovery started.
1. Turn off or restart the Notebook.
2. Turn the notebook on and press and hold the F9 key to launch
the tool.
3. The recovery window will open
and give you the option to
“Recovery” in the toolbar. You
will be prompted if you want to
recovery. Click on “Recovery” to
begin the repair if you do.
4. The "Recovering" Window will
open and begin the recovery.
![](/img.php?id=1241334&img=bg29.png)
English
32
5. Once it is complete you will be
prompted to reboot the notebook.
Appendix III GIGABYTE Service Information
More service information please link to GIGABYTE ofcial website:
http://www.gigabyte.com.tw