Guangzhou Chicken Run Network Technology T1D Bluetooth Controller User Manual
Guangzhou Chicken Run Network Technology Co.,Ltd. Bluetooth Controller
User manual
![](/img.php?id=3731128&img=bg1.png)
Power On / Off
Sleeping Function
Low Battery Indication
ABXY lights flash once/second.
Charging Indication
1.Charge under connection condition
2.Charge under sleeping condition
※Product Function
Adjust / Turn On / Off LED Lights
Turn On/Off LED Lights
Press L1 + R1 button for 5 seconds to turn on/off the button light.
1. Power On: Press Power button for 2 seconds to start.
2. Power Off: Press Power button for 5 seconds to power off.
When connecting to charging cable, ABXY lights flash once / 2 seconds.
All lights keep on when it is fully charged.
When connecting to charging cable, the gamepad wakes up and enters
current mode. Mode signal indicators will turn off when no signal
receives after 1 minute. HOME and ABXY button lights start flashing. All
lights keep on when it is fully charged.
1. The gamepad enters sleep state after 1-minute disconnection.
2. The gamepad is off after 10-minute no action.
Connect gamepad with any device first, press L2+R2+R3, and then
press D-pad / Up / Down button to adjust brightness of lights.
Press L1 + R1 button for 5 seconds to turn on / off the button light.
Press HOME button for 2 seconds to turn on the gamepad, it will be
reconnected to the device automatically.
※Auto Reconnection
3.When the device's Bluetooth is off and gamepad is off
※Attention
1.When the device's Bluetooth is on and gamepad is off
Turn on the device's Bluetooth, the gamepad will be reconnected
automatically.
Turn on the device's Bluetooth, Press HOME button for 2 seconds to
turn on the gamepad, it will be reconnected automatically.
1. Avoid strong vibration. Do not disassemble, refit or repair on your
own.
2. Do not keep the gamepad in humid, high temperature or soot place.
3. Keep the gamepad away from water or humid environment, as they
may impact performance of the gamepad.
4. Keep the gamepad away from fire, as the built-in battery will be in
danger of explosion.
5. Charging voltage is USB 3.7-3.5V DC supply. Normal Android smart
phone charging adaptor is available.
6. Children shall use the production under adult's supervision.
7. If you have any problem about quality or other suggestion, please
contact the distributor or our after-sale service staff. Contact details can
be found on the package.
台湾NCC警示语:
根據NCC低功率電波輻射性電機管理辦法 規定:
第十二 經型式認證合格之低功率射頻電機,非經許可,公司、商號
或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四 條低功率射頻電機之使用不得影響飛航安全及干擾合法通信;
經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。
前項合法通信,指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設
備之干擾。
韩国KC警示语:
巴西ANATEL警示语:
Este equipamento não tem direito à proteção contra interferência
prejudiciale não pode causar interferência em sistemas devidamente
autorizados.Este produto está homologado pela ANATEL, de acordo
com os procedimentos regulamentados pela Resolução n°. 242/2000
e atende aos requisitos técnicos aplicados.
Note:If you want to connect gamepad to other devices, please
re-pair & re-connect.
2.When the device's Bluetooth is off and gamepad is on
※Connection
a. Turn on phone device's Bluetooth
b. Press Power button of the gamepad for 2 seconds to turn it on
c. Search "GameSir-T1d" signal in Bluetooth management interface,
and click it to connect
d. When indicator light keeps on and indicator light flashes, the
gamepad is successfully connected
Platform (Android / IOS)
Bluetooth Connection
![](/img.php?id=3731128&img=bg2.png)
For All Products Except Those with Wireless
Operation:
GuangZhou Chicken Run Network Technology Co,Ltd.Hereby declares
that this equipment is in compliance with the EMC 2014/30/EU Dirertive,
LVD 2014/35/EU Dircrtive,ErP 2012/27/EU Directive and RoHS 2011/65/
EU Directive. The declaration of conformity may be consulted in the
support section of our Web site, accessible from www.gamesir.hk
For All Products with Wireless Operation:
GuangZhou Chicken Run Network Technology Co,Ltd. hereby declares
that this equipment is in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EU,ErP 2012/27/EU
Directive and RoHS 2011/65/EU Directive The declaration of conformity
may be consulted in the support section of our Web site, accessible
from www.gamesir.hk
FCC&IC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAN ICES-3(B) / NMB-3(B)
![](/img.php?id=3731128&img=bg3.png)
For all products:
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
※I MPORTANT SAFETY INSTRUCTIONS
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this apparatus near water.
6.Clean only with a dry doth.
7.Do not block any ventilation openings. Install this apparatus in
accordance with the manufacturer^ instructions.
8.Do not install this apparatus near any heat sources such as radiators,
heat registers, stoves or other apparatus (including amplifiers) that
produce heat.
9.Do not defeat the satiety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. The
wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10.Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles and the point where they exit from the
apparatus.
11.Use only attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket or table
specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long
periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as when the
power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, or the apparatus has been exposed to rain
or moisture, does not operate normally or has been dropped.
15.Do not expose this apparatus to dripping or splashing, and ensure that
no objects filled with liquids, such as vases, are placed on the apparatus.
16.To disconnect this apparatus from the AC mains completely,
disconnect the power- supply cord plug from the AC receptacle.
IC INFORMATION FOR USERS
For Products That Transmit RF Energy:
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions: (1) This device may
not cause interference; and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
Cet appareil est conforme aux CNR exemptes de licence d'Industrie
Canada . Son fonctionnement est soumis aux deux conditions suivantes :
( 1 ) Ce dispositif ne peut causer d'interférences ; et
( 2 ) Ce dispositif doit accepter toute interférence , y compris les
interférences qui peuvent causer un mauvais fonctionnement de
l'appareil.
There are no restrictions in use in EU
WARNING
DO NOT INGEST BAHERY, CHEMICAL BURN HAZARD [The remote
control supplied with] This product contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it can cause severe internal
burns in just 2 hours and can lead to death. Keep new and used
batteries away from children. If the battery compartment does not dose
securely, stop using the product and keep it away from children. If you
think batteries might have been swallowed or placed inside any part of
the body, seek Immediate medical attention.
CAUTION FCC AND IC STATEMENT FOR USERS
(USA AND CANADA ONLY)
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
interference; and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
aaordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
WARNING: TO REDUCE THE RISK OF FIRE OR ELEQRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
Caution: Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
Federal Communication Commission Interference
Statement
THE LIGHTNING FLASH AN ARROWHEAD SYMBOL, WITHIN AN
EQUILATERALTRIANGLE, IS INTENDEDTO ALERT THE USER TO THE
PRESENCE OF UNINSULATEDTANGEROUS VOLTAGE"WITHIN THE
PRODUQ'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO
CONSTITUTE A RISK OF ELECTRIC SHOCKTO PERSONS.
smart
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS
INTENDEDTO ALERT THE USERID THE PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE (SERVICING) INSTRUQIONS IN THE
LITERATURE ACCOMPANYING THE PRODUQ.
17.The mains plug of the power-supply cord shall remain readily operable.
18.Do not expose batteries to excessive heat such as sunshine, fire or the
like.
not occur in a particular installation. If this equipment does ause harmliil
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION
![](/img.php?id=3731128&img=bg4.png)