Heiman Technology WS2SKUS Smart Metering Plug User Manual
Shenzhen Heiman Technology Co.,Ltd. Smart Metering Plug Users Manual
User Manual
Smart Metering Plug Quick Guide WS2SK-US LED Indicator Product Details Networking Button Supply plug The smart WiFi metering plug, adopts flameretardant engineering material and low-power consumption WiFi wireless signal transmission technology, it can be controlled by APP remotely. It also supports power metering and timing switch (need to combine with APP), and the function of power, voltage, current overload protection. Plug and play, install without tools. 1.Working Voltage: AC220V(full voltage range) 2.Average Power Consumption: <0.5W 3.Maximum Load: 3000W 4.Measured Voltage Range: 110VAC-240VAC 5.Measured Current Range: <16A 6.Measured Power Range: <3000W 7.Wireiess Networking Distance: Up to 100 meters (in open area) 7.Working Environment: -10℃ ~ +50℃ 8.Working Humidity: ≤95%RH 9.WiFi Standard: IEEE 802.11b/g/n 2.4GHz 10.Outline Dimension: 79.6*67.9*59mm *Please read the user manual carefully before operation. The guide picture is for reference only, please in kind prevail. Scan above QR code as above to download APP, and register user account with valid email, activate your acount and login. Hismart Click " ", select the Metering Plug. According to WiFi configuration guide, press networking button for 5 seconds till the red LED flash. FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: o Reorient or relocate the receiving antenna. o Increase the separation between the equipment and receiver. o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. o Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To comply with FCC RF exposure compliance requirements,this grant is applicable to only mobile configurations. The antennas used for this transmittermust be installed to provide a separation distance of at least 20 cm from allpersons and must not be co-located or operating in conjunction with any otherantenna or transmitter. Chooseable Plugs Description of LED Indicator Status Light It is suit to work with table lamp, TV, air-conditioner, refrigerator, electric fan, coffee machine, bread machine and some other household appliances and metering power consumption. Red LED Blue LED State Operation flash quickly Networking. Flash slowly Supply plug is powered off while network disconnected. Light on Supply plug is powered on while network disconnected. Light on Supply plug is powered on while network connected. Light off US Standard Smart Plug Input WiFi password. Click Configuration , APP will prompt “adding success” (smart phone needs to connect to WiFi which has set password before configuration, and WiFi needs to connect to Internet ) The red LED flash quickly and turn off after networking succeed, check the device list in “my device”. Plug an home appliance into the supply plug and power on, user can check power consumption of this home appliance through APP. Power on/off: After pressing power switch/networking button, blue LED keeps on and supply hub will be powered on; Press power switch/networking button again, blue LED turned off, supply hub will be powered off. UK Standard Smart Plug ! Please choose proper plug type according to your need. Supply plug is powered off while network connected. Statement *Instruction is for reference only, please prevail in kind. *Because of the updating of the technology, the final interpretation right owned by factory, if there are any inconformities when using this products under this instruction.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 1 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:9c0d91ee-9f76-11f2-0000-02c7314339d4 Producer : GPL Ghostscript 9.18 Modify Date : 2017:07:12 23:30:16Z Create Date : 2017:07:12 23:30:16Z Creator Tool : UnknownApplication Document ID : uuid:9c0d91ee-9f76-11f2-0000-02c7314339d4 Format : application/pdf Title : UntitledEXIF Metadata provided by EXIF.tools