Ibis Networks 200 RF Module User Manual DataSheetSinglex

Ibis Networks Inc. RF Module DataSheetSinglex

Contents

User Manual - IS-201

IS-201 InteliSocket™ Ibis Networks · 828 Fort Street Mall Suite 600 · Honolulu, HI 96813 · www.ibisnetworks.com 1 05/28/15 FEATURES • 120V 15A • UL Certification • ZigBee Pro • 128 bit AES Security • 20dBm RF Power • Surge Protected • 0C to 40C DESCRIPTION The IS-201 is a smart socket which meters plug load energy usage and provides device on/off capability. It works with other InteliSocketsTM to form a secure wireless mesh network for control and reporting of data. Each network has an InteliGatewayTM base station providing connectivity to the Ibis InteliNetworkTM, a cloud-based data collection and analysis application. InteliSockets can be configured to operate on any of the 15 ZigBee channels. In addition, the hive (PANID) has over 4000 possible settings, preventing nearby systems from interfering with each other. PERFORMANCE Parameter Symbol Min Typ Max Units Input Voltage (RMS) VIN 108 120 132 V Input Frequency 60 Hz Output Current (RMS) IOUT 15 A Output Power POUT 1800 W Power Consumption 1 W Reporting Interval 1 15 255 s Accuracy (Energy) 0.5 % Accuracy (Voltage) 2 % Accuracy (Interval) 1 ms Resolution 1 W-s RF Range 50 m RF Transmit Power 0 20 dBm Sockets per Network 120 ZigBee Channels 11 25 ZigBee Hive 0x3000 0x3FFF Size 4.1 x 2.2 x 1.7 inches
IS-201 InteliSocket™ Ibis Networks · 828 Fort Street Mall Suite 600 · Honolulu, HI 96813 · www.ibisnetworks.com 2 05/28/15 COMPLIANCE Agency File UL916 – Energy Management Equipment E470522 ZigBee Profile (Ibis Automation) 0x114B FCC 2AECN200 ENVIRONMENTAL Parameter Symbol Min Typ Max Units Operating Temperature TO 0 25 40 C Storage Temperature TS -40 100 C Relative Humidity RH 0 95 % InteliSockets are for indoor use only. PROTOCOL InteliSockets use the Ibis custom ZigBee profile for commands, acknowledgements, and reporting of data. Refer to the V2 Protocol documentation for details. DATA InteliSockets report data typically every 15 seconds. Each report packet is comprised of socket type, ZigBee channel, ZigBee hive (PANID), interval (seconds), voltage (RMS), frequency (Hz), energy (watt-seconds), and power factor (fraction). From these data we can calculate instantaneous power (watts) and current (amps).      ·  The InteliGateway appends additional information (IP, timestamp, location, etc.) before uploading to the InteliNetwork. This allows any socket in the world to be located and addressed individually.
IS-201 InteliSocket™ Ibis Networks · 828 Fort Street Mall Suite 600 · Honolulu, HI 96813 · www.ibisnetworks.com 3 05/28/15 PUSHBUTTON The small pushbutton on the side provides addition control features. First and foremost, it is a manual override for turning the outlet on and off (toggle). If pressed for at least two seconds, it causes a reboot of the socket. Finally, if the pushbutton is pressed while plugging in the socket, a factory reset is performed causing the socket to revert back to factory default settings. This is a useful feature for maintenance purposes. LED The LED on the front indicates the state of the socket. When red the outlet is off; green is outlet is on. If LED is blinking, the socket has not yet associated with a mesh network. During a reboot, the LED will flash yellow for a second. FCC This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment. To satisfy RF exposure requirements, this device and its antenna must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu