JTS Professional Co IN-264TH Wireless Handheld Microphone User Manual Appendix 4 Manual
JTS Professional Co Ltd Wireless Handheld Microphone Appendix 4 Manual
User Manual
Music INFINITY Life IN264TB REMOSET ▲ IN264R SET SET ▲ AF RF AF RF ▲ SET ▲ UHF PLL Dual Channel Diversity Wireless System * The system is of the innovative design to allow changing the transmitter’s frequency by long-distance . * IN264R with band width of 36 MHz. * Preset 6 groups, maximum 23 channels in one group. 59508-021-02 REMOSET IN264 Music INFINITY Life 1. Important Caution 2. Features 3. Parts Identification 01 Always make all connections before plugging the unit into an AC power outlet. 01 Do not leave the devices in a place with high temperature or high humidity. Do not handle the power cord with wet hands ! 02 3-1 IN264R 02 3-2 IN264TH 03 3-3 IN264TB 04 3-4 Accessories 04 4. Connection 1. Important Caution 05 4-1 Connect to the subsequent unit 05 4-2 Connect the power supply unit 05 Keep the devices away from fire and heat sources. Pair the ID codes of the transmitter and the receiver to have proper function. 2. Features JTS IN264 wireless microphone system is designed with the world first RF remote setting function (REMOSET). A user can set the receiver with desired frequency and press the “REMOSET” Key; then the transmitter will automatically be 5. Operation 06 5-1 Set up the system 06 5-2 Set up ID code 06 5-3 Synchronize the channel 07 5-4 Check system status 08 set. The operation distance can reach 10 meters. This brings great convenience to sound engineers during live performance. IN264 is of 36MHz bandwidth to render 23 transmitters work simultaneously. It provides great convenience to large venue. A new capsule has been developed for IN264TH . The capsule, SAM-8W, is designed for large venue with hundreds of thousands watt power. The SAM-8W delivers vivid details of vocal and instruments. 5-5 Manual select channel 09 5-6 REMOSET button lock 10 5-7 Adjust the sensitivity of the microphone 11 6. Specification 13 The IN264 is of stylish industry design. Yet JTS bombproof quality remains as always. IN264 01 Music INFINITY Life 3. Parts Identification LCD Panel of the Receiver a AF Level: display the strength of audio signal b RF Level: display the strength of radio signal c Antenna Status: the receiver will automatically select an antenna with stronger signal level d Low battery indicator: display the low battery status of its transmitter e Group & Channel: there are 6 groups, maximum 23 channels in one group. 3-1 IN264R Front panel 1 Power Switch 2 Channel Selector: including “ up”, “ down” and “Set” button 3 LCD Panel 4 REMOSET Key: press it to send a desired channel data to a transmitter REMOSET SET AF RF ▲ AF RF AF RF ▲ ▲ IN264R SET ▲ REMOSET 3-2 IN264TH 12 LCD Display 13 Battery Tray 14 Set button: set the configuration of 7 11 10 8 10 handheld transmitter 15 Up button: select the settings of transmitter Rear panel 12 16 Down button: select the settings of transmitter 16 17 Power and Mute Switch 5 BNC antenna connector 17 15 14 6 Power Supply Jack (12-18V/600mA): for connecting the power supply unit 7 Squelch adjuster: to adjust radio signal level of both channels 13 8 Mixed AF Output (6.3mm jack, unbalanced): for connection to a balanced input, e.g. of a mixer or amplifier 9 Balanced XLR Output: for connection to the balanced input, e.g. of a mixer or an amplifier LCD Panel of the Handheld Transmitter f Battery status: display battery status g Group & Channel: there are 6 groups, maximum 23 10 Output Level Attenuation(-10dB,-20dB): to attenuate the balanced XLR output 11 LIFT / GND 02 IN264 channels in one group. level by 10dB,20dB 03 Music INFINITY Life 3-3 IN264TB 4. Connection 18 LCD Display 4-1 Connect to the subsequent unit (e.g. mixer, or amplifier) 19 Battery Tray Connect one end of a proper AF cable to the AF Output 9 or Balanced XLR 20 Set button: set the configuration of bodypack transmitter Output socket 10 , then plug another end to the “MIC IN” input socket of a 21 Up button: select the settings of transmitter mixer or a amplifier (Step 1 of Figure 1) 22 Down button: select the settings of transmitter 4-2 Connect the power supply unit 23 4 Pin mini XLR mic. input 24 Power Switch Plug in one end of AC/DC adaptor cable 27 to Power Supply Jack 7 in the 25 Gain control: control sensitivity of the transmitter rear panel of receiver, and plug another end into an AC outlet 26 Pad: -20dB, -6dB, 0dB (Step 2 of Figure 1) LCD Panel of the Body-Pack Transmitter h Battery status: display battery status i Group & Channel: there are 6 groups, maximum 23 channels in one group. 24 MIXER 26 AUDIO OUTPUT 18 25 23 -20 -6 20 21 22 DC INPUT 19 28 29 IN264 Figure 1 3-4 Accessories 27 AC/DC adaptor 28 AF output cable 27 (with Φ6.3 plug at both ends) 29 Screwdriver (IN264TB) 30 CM-501 (IN264TB) 04 30 05 Music INFINITY Life 5. Operation Handheld and BodyPack transmitter ID code ON/OFF setting 5-1 Set up the system A) Turn on the power of the receiver A) Press "Set" button 14 20 for 3 seconds, LCD Panel will Switch the “Power Switch” 2 to “ON”. The “LCD Panel” 4 and “REMOSET” start flashing. Key 5 will light up. B) Press "Set" a couple of times until "ID Code ON/OFF" setting window shows. B) Turn on the power of the transmitter C) Press " Up" or " Down" button to select between " ID ON " and " ID OFF ". Press the “Power Switch” 17 24 . The “LCD Display” 12 18 will light up. D) After setting, press "Set" again to save the settings. C) Mute Function ( for IN264TH ) Caution After the transmitter's power is on, short pressing the "Power Switch " 17 will mute the microphone. Press the "Power Switch" again will re-activate When ID code is off (idOFF), the transmitter will accept any synchronization from any IN264R. the microphone. ID code selecting Notice: You have to hold the "Power Switch" for 3 seconds in order to turn A) Press "Set" button 14 20 for 3 seconds, LCD Panel will start flashing. off the transmitter. B) Press "Set" a couple of times until "ID Code" setting window shows. C) Press " Up" or " Down" button to select a distinct ID code from " id 0" to "id 99 ". (Figure 3) D) Install the antennas 1 6 in a vertical position D) After setting, press "Set" again to save the setting. 5-2 Set up ID code In order to match one receiver channel to one transmitter, IN264 is designed with“ ID code”. If and only if both ID codes of a receiver channel and a transmitter match each other, the “REMOSET” function works. When IN264TB 3” setting the ID code, system will automatically avoid the ID code used by the other channel. There are 100 ID codes available. Receiver B) Press "Set" to enter "ID Code" setting window. (Figure 2) Down" button to select a distinct ID code from "id 0" to "id 99". ▲ D) After setting, press "Set" again to save the setting. 06 Figure 2 SET Figure 3 A) Press "Set" button 3 for 3 seconds, LCD Panel will start flashing. C) Press " Up" or SET 3” ▲ IN264 07 Music INFINITY Life 5-5 Manual select channel: Receiver 5-3 Synchronize the channel A) Press "Set" button on the receiver for 3 Seconds, the group (G) in the "Group & Channel" e area will flash. (Figure 4) A) Press "Set" button for 3 seconds, the group (G) in the "Group & Channel" area will flash. (Figure 8) B) Press " Up" or " Down" button to select a desired group C) Press "Set" again and the Channel (CH) in the "Group & Channel" area B) Press " Up" or " Down" button to select a desired group. will flash. C) Press "Set" again and the Channel E) After setting, press “Set” again to save the settings. (CH) in the "Group & Channel" F) Press "REMOSET" 4 to synchronize the channel of a transmitter. area will flash. D) Press " (Figure 5) G) If the channel of the transmitter fails to change, the "REMOSET" key will AF RF ▲ D) Press " Up" or " Down" button to select a desired channel. SET ▲ Figure 8 Up" or " Down" button to select a desired channel. E) After setting, press “Set” again to save the setting. keep flashing. Notice 1: The transmitter has to be set to "synchronization on (SYnOn)" in order to allow the receiver to synchronize.(Handheld and Scan Function body Pack Setting List p.12 ) A) Press "Set" button for 3 seconds, the group (G) will flash. Notice 2 : When setting the channel, system will automatically avoid B) Press "Set" to enter “Sn OF” or “Sn On”. C) Press " the channel used by the other channel. Up" to select “Sn On” , press " Down" to select “Sc OF” . D) If select “Sc On” , when select channel, the receiver will jump over a channel in use automatically. ▲ Figure 4 SET ▲ AF RF ▲ AF RF SET ▲ REMOSET Figure 5 Handheld and BodyPack transmitter A) Press "Set" button for 3 seconds, the group (G) will flash. (Figure 9) B) Press " Up" or " 5-4 Check system status A) Antenna Status: the receiver will automatically select an antenna with stronger signal reception and highlight that antenna c (Figure 6) B) Battery indicator: the receiver’s battery indicator will show the same gauge as the transmitters. If the transmitter is under low battery status, the receiver LCD backlight will be on amber. Down" button to select a desired group. C) Press "Set" again and the Channel (CH) will flash. D) Press " Up" or " Down" button to select a desired channel. IN264 E) After setting, press “Set” again to save the setting. IN264TB 3” AF RF AF RF Figure 6 08 SET 3” Figure 9 Figure 7 09 Music INFINITY Life 5-7 Adjust the sensitivity of the microphone Handheld transmitter 5-6 Lock ON Function Receiver A) Press "Set" button for 3 seconds to enter A) Press "Set" button for 3 seconds to enter setting window setting window. (Figure 12) B) Press "Set" again until the Lock setting window shows. (Figure 10) B) Short press "Set" until the sensitivity Notice: Original setting is lock off (Lo OF). C) Press " Up" or " setting window shows. Down" button to C) Press " Up" or " select the mode between "Lock On" Down" button to 3” select the sensitivity among 0db, and "Lock off". D) After setting, press "Set" again to -3db, -6db, -9db, -12db, -15db, -18db AF RF ▲ save the setting. SET ▲ Figure 10 To release the “Lock ON” and -21db. Figure 12 D) After setting, press "Set" again to save the setting. A) Press “Set” for 2 seconds. B) Press “down” to select “Lock OFF”. BodyPack transmitter C) Press “Set” to store. A) Use the screwdriver 29 included to adjust the sensitivity from gain control 25 . (clockwise is "increase") B) If further adjustment is needed please adjust the pad. 26 Handheld and BodyPack transmitter A) Press "Set" button for 3 seconds to enter setting window. (Figure 11) B) Press "Set" again until the Lock setting window shows. Notice: Original setting is lock off (Lo OF). C) Press " Up" or " Down" button to select the mode between "Lock On" 5-8 Adjust the transmitting power Handheld/Body Pack Transmitter A) Push the "Set" button several times until the "rF Lo " or "rF Hi" flashes. B) Then push "Up" to choose "Hi" for high transmitting power and push and "Lock off". "Down" to choose "Lo" for low transmitting power. D) After setting, press "Set" again to save the setting. C) Push the "Set" again to save the setting. To release the “Lock ON” A) Press “Set” for 2 seconds. B) Press “down” to select “Lock OFF”. C) Press “Set” to store. IN264TB 3” Figure 11 10 SET 3” IN264 11 Music INFINITY Life Handheld and Body Pack Setting List Sensitivity 0 dB is the highest sensitivity Settings “On” means “REMOSET” function always opens; Synchronization ON/OFF When ID code is OFF (id OFF), the transmitter will accept any synchronization from any IN264R. There are 100 ID codes. button unlock Lock ON 6-1 IN264R Frequency Preparation.... PLL Synthesized Control Remoset............................ Radio Frequency : 2.4GHz Effective distance: 10m Carrier Frequency Range 502~960 MHz S/N Ratio............................ >105dB T.H.D.................................. <0.6%@1KHz Display............................... LCD Display Contents.............. Channel, Antenna A/B, Mute Display, RF/AF Level Meter, Low battery, ID Number Controls............................. Power On/Off, Frequency Up/Down, Lock-on, ID Pairing, Remoset Audio Output Level.......... -12dB AF Output Impedance...... ȍ Squelch.............................. Pilot Tone & Noise Mute Operation Voltage............. 12-18 VDC, 600 mA Output Connector............. 2 XLR Balanced Socket / 1 Ø6.3mm unbalanced phone jack Dimension(m/m)............... 420mm(W) * 44mm(H) * 211mm(D) “OFF” means “REMOSET” function is turned off ID code ON/OFF ID code select 6. Specification 6-2 IN264TH Frequency Preparation......... Carrier Frequency Range..... RF Outputs............................ Stability.................................. Frequency Deviation............. LCD Display........................... Controls................................. Spurious Emissions............. Audio Frequency Response Battery.................................... PLL Synthesized Control 502~960 MHz 10mW ±10KHz ±48KHz Channel, Battery Fuel Gauge, ID Number Power On/Off, AF Level, Frequency Up/Down, Lock-on Mode,ID Pairing <-50 dBC 50~16,000 Hz UM3, AA 1.5V*2 button lock 6-3 IN264TB IN264 Frequency Preparation........ Carrier Frequency Range.... RF Outputs............................ Stability................................. Frequency Deviation............ LCD Display.......................... Controls................................ Output connector................. Spurious Emissions............. Audio Frequency Response Battery................................... 12 PLL Synthesized Control 502~960 MHz 10mW ±10KHz ±48KHz Channel, Battery Fuel Gauge, ID Number Power On/Off, AF Level, Frequency Up/Down, PAD, Gain Control Lock-on Mode, ID Pairing 4P mini XLR <-50 dBC 40~18,000 Hz UM3, AA 1.5V*2 13
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2010:12:20 15:43:46+08:00 Modify Date : 2010:12:20 15:43:46+08:00 Page Count : 8 Creation Date : 2010:12:20 07:43:46Z Mod Date : 2010:12:20 07:43:46Z Producer : Acrobat Distiller 5.0.5 (Windows) Author : user Metadata Date : 2010:12:20 07:43:46Z Creator : user Title : Appendix 4 Manual.pdfEXIF Metadata provided by EXIF.tools