Junlan Electronic SBB70759 Bluetooth soundbar User Manual SBB 036P3

Shenzhen Junlan Electronic Ltd Bluetooth soundbar SBB 036P3

Contents

User Manual-SBB-036P3

Download: Junlan Electronic SBB70759 Bluetooth soundbar User Manual SBB 036P3
Mirror Download [FCC.gov]Junlan Electronic SBB70759 Bluetooth soundbar User Manual SBB 036P3
Document ID3795132
Application IDOIUGgMFs8Fz0U9xWG6hY3g==
Document DescriptionUser Manual-SBB-036P3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize125.34kB (1566702 bits)
Date Submitted2018-03-26 00:00:00
Date Available2018-03-26 00:00:00
Creation Date2018-03-02 09:05:58
Producing SoftwareAdobe PDF library 10.01
Document Lastmod2018-03-22 16:09:38
Document TitleSBB-036P3说明书
Document CreatorAdobe Illustrator CC (Windows)

Bluetooth Soundbar
User Manual
MODEL: SBB-036P3
www.dbpower.co.uk / service@dbpower.co.uk
TABLE OF CONTENTS
What’s in the box ..........................................................................................................2
Product diagram ...........................................................................................................3
Remote control key defination .............................................................................4
Battery installation for remote control.............................................................5
Placement and mounting .......................................................................................6
General operation ........................................................................................................7
Bluetooth pairing and connection.......................................................................8
Optical digital audio in operation..........................................................................8
Line in and Aux in opertation ..............................................................................10
Troubleshooting...........................................................................................................11
Gerneral specifications............................................................................................12
FCC statement and Safety instructions.........................................................13
WHAT’S IN THE BOX
Soundbar
Remote Control with CR2025 Battery
Bluetooth Soundbar
User Manual
MODEL: SBB-036P3
www.dbpower.co.uk / service@dbpower.co.uk
User Manual
Power Adapter
Aux In cable
Line In Cable
Digital Optical Cable
PRODUCT DIAGRAM:
Front View
1. Remote sensor
3. Speaker
3. Speaker 2. Mode Indicator
Rear View
4. Optical in
6. Line in
7. DC in jack
Side View
11. Volume up button
8. STANDBY/
SOURCE button
5. Aux in
9. Play/Pause button
10. Volume down button
REMOTE CONTROL KEY DEFINATION
Power
Mute
Press to turn on/off
the device
Press to mute/unmute
Pause/Play
Volume +
Press to play or pause
Press to increase volume
Previous
Next
Press to return to
previous track
Press to skip to the
next track
Volume -
Press to decrease volume
News Mode
Source
Press to adjust news
effect
Press repeatedly to switch
Bluetooth/Optical/Line in
Aux mode
Music Mode
Press to adjust music
effect
Movie Mode
Press to adjust movie effect
Treble Mode
Press to enter treble
adjustment mode
Press and hold 5
seconds to restore
default settings
Bass Mode
Press to enter treble
adjustment mode
Press and hold 5 seconds
to restore default settings
BATTERY INSTALLATION FOR REMOTE CONTROL
Battery installation:
1. Press and slide out the battery door as shown in Fig.1.
2. Replace the battery with a new CR2025(3V) button cell with the polarity marking
upward as shown in Fig.2.
3. Insert the battery door back again and make it firm as shown in Fig.3.
3V CR2025
3V CR2025
CR2025
CR2025
Fig.1
Fig.3
Fig.2
BATTERY PRECAUTIONS
Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in
the battery compartment, a reserved battery may cause damage to the device.
3. Do not mix different types of battery together ( e.g: Alkaline and Carbon-zinc )
or old battery with fresh ones.
4. If the battery in the device are consumed or the device is not to be used for a long
period of time, remove the battery to prevent damage or injury from possible
leakage.
5. Do not try to recharge the battery as it is not intended to be recharged; it can
overheat and rupture. ( Follow the battery manufacturer’s instructions.)
6. The battery shall not be exposed to excessive heat such as sunshine or fire.
7. Clean the battery contacts and also those of the device prior to battery installation.
8. The remote control is supplied with a coin/button cell
battery. If the coin button cell battery is swallowed, it
can cause severe internal burns in just 2 hours and can
lead to death. Keep new and used battery away from
children. If the stop using the product and keep it
CR2025
away from children.If you think battery might have been swallowed or placed any
part of the body, seek immediate medical attention.
CAUTION
●
●
●
●
Danger of explosion if the battery is incor rectly replaced.
Replace only with the same or equivalent type.
Remote control operation range
When there is an obstacle between the remote and the transmitter, the unit
may not operate.
When direct sunlight, an incandescent lamp, fluorescent lamp or any other
strong light shines on the REMOTE SENSOR of the unit, the operation of the
remote may be unstable.
PLACEMENT AND MOUNTING
1. Placing the device on table - Ventilation
When placing the Sound Bar on an entertainment center, bookshelf, or Bany type
of enclosed space, be sure to allow at least 2-3 inches of space around the Sound
Bar for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat generated from the Sound Bar could produce a potential heat hazard.
2-3inches
2-3inches
A UX I N
MOUNTING TO THE WALL
2.1 Mounting to wooden wall
21.
2 in
(screws not included)
che
A. Mark the position of the mounting screws on the wall using a pencil.
B. Drill the screws directly into the marks that you have made on the wall and leave
approx. 0.3 inches length to hook the sound bar.
C. Put the sound bar onto the mounting screws. Make sure they are firm and stable.
2.2 Mounting to brick wall
21.
2 in
che
(screws and plastic fixing plug are not included)
A. Mark the position of the mounting screws on the wall using a pencil.
B. Drill 2 holes on wall with a powerful electric drill.
C. Insert the fixing plug and hammer into the holes.
D. Secure the screws into the fixing plug and leave approx. 0.3 inches length to hook
the sound bar.
E. Put the sound bar onto the mounting screws. Make sure they are firm and stable.
GENERAL OPERATION
1. Connect the Adapter to the unit and wall outlet. The red indicator will light.
2. Press and hold the STANDBY/SOURCE button on the unit or press the
button
on remote control to power on the unit.
3. Press the STANDBY/SOURCE button on the unit or press the SOURCE on remote
control repeatedly to switch to desired mode. The color of the mode indicator will
turn to:
Bluetooth Indicator
Flashing Blue
Not paired to any Bluetooth device
Solid Blue
Paired
Optical Indicator
Solid Indigo
Optical Mode
Line in Indicator
Solid Green
Line in Mode
Aux in Indicator
Solid Violet
Aux in Mode
NOTE: The indicators also function as a volume indicator. When the volume + / 7
button is pressed, the LED indicators will flash up or go off one by one to show
the increased or decreased volume,it will turn to solid light when the maximum or
minimum volume is pressed.
4. Remote control setup:
~ Press the Vol+ or Vol- buttons to adjust volume.
~ Press the MUTE button on remote control to turn on or turn off the sound.
~ Press the NEWS on remote control to set the news sound effect.
~ Press the MOVIE on remote control to set the movie sound effect.
~ Press the MUSIC on remote control to set the music sound effect.
~ Press the BASS button on remote control repeatedly to set bass level.
~ Press the TREBLE button on remote control repeatedly to set treble level.
NOTE: Both BASS and TREBLE button have seven levels of adjustment with 0 as the
default. A single press sequentially gives +1, +2, +3, -3, -2, -1 and back to 0.
5. When finish listening, press and hold the STANDBY/SOURCE button on unit
or press the
button on remote control to power off the unit and put it into
standby mode.
BLUETOOTH PAIRING AND CONNECTION
1. Power on the unit as previously explained.
2. Press the STANDBY/SOURCE button on the unit or press the SOURCE button on
remote control repeatedly until the indicator turns to Blue and blinks.
3. Power on the external Bluetooth enable device and enter Bluetooth mode and try
searching the unit.
4. When "SBB-036P3" appears, select it and make connection.
5. Aſter successful paired, the Blue indicator will stay lit.
6. During playback:
~ Press the
or
button on remote control to skip tracks.
~ Press the
button on remote control to pause, press it again to resume.
NOTE: The unit will be automatically connected with the last paired Bluetooth device
if their Bluetooth function are activated and they are in working range.
OPTICAL DIGITAL AUDIO IN
1. Connect the Optical out jack from the external audio player (such as TV, DVD
player etc.) to the OPTICAL IN jack on the rear of the unit with the optical
connection cable as illustated below:(For PCM format only)
Rear View
LINE IN
Optical Connection Cable
TV or DVD player etc.
OPTICAL OUT
2. Power on the unit as previously explained.
3. Press the STANDBY/SOURCE button on the unit or press the SOURCE button
on remote control repeatedly until the indicator turns to Indigo.
4. Power on the connected external player and start playback the music as usual.
Turn on the digital audio output and set it to PCM (Plus Code Modulation) type
similar to the follows figure:
Picture
Audio
Setup
Time
Sound Mode
Bass
Treble
Balance
Surround
AVL
Digital Output
Audio Language
Select
Lock
Off
MENU
Exit
Standard
Off
Off
PCM
English
Move
LINE IN
An external Audio/Video player(such as TV, DVD palyer etc.) can be connected to
this unit and listen through the unit's speakers.
1. Plug one end of the Line In cable into the LINE IN jacks(L&R) on the unit.
2. Plug the other end of the line in cable into the Line Out jacks(L&R) on TV or DVD
player etc.
Rear View
white
red
Line out jacks of
TV/DVD player etc.
Video
3. Power on the unit as previously explained.
4. Press the STANDBY/SOURCE button on the unit or press the SOURCE button
on remote control repeatedly until the indicator turns to Green.
5. Power on the connected external player and start playback the music as usual.
AUX IN
An external Audio player(such as mobile phone, MP3 palyer etc.) can be connected
to this unit and listen through the unit's speakers.
1. Plug one end of the AUX IN Cable into the AUX IN jack on the unit.
2. Plug another end of the AUX IN Cable into the headphone hack or Aux Out jack
on the external audio player.
10
LINE IN
Side View
MP3 Player Mobile Phone
Connect to the Phones; AUX Out;
Line Out Jack of the external devices
(Such like MP3 Player; cell phones;
iPod/iPad ... etc)
3. Power on the unit as previously explained.
4. Press the STANDBY/SOURCE button on the unit or press the SOURCE button
on remote control repeatedly until the indicator turns to Violet.
5. Power on the connected external player and start playback the music as usual.
TROUBLESHOOTING GUIDE
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
The adapter is not connected
Conenct the adapter to the unit and
wall outlet
The unit is in standby mode
Press and hold STANDY/SOURCE
button on the unit or press the button
on remote control to power on the unit
No power
Raise the volume level by pressing
Volume level in minimum position the Vol + Button on the top of unit
Or press VOL+ button on remote control
No sound or
sound weak
The paired/connected device
is not in playback mode
Input source incorrect
11
Play music/movie in the paired/
connected device as usual and make
sure the volume level of it is in high
level.
Press the STANDY/SOURCE button
on the unit or press the SOURCE button
on remote control to switch to desired
mode
Sound distortion
/rattle
Remote Control
not functioning
Bluetooth
reception failure
Volume level too high
Reduce the volume level by
pressing the Vol - Button on the
top of the unit ,Or press VOL- button
on remote control ,Reduce the
volume level of the paired/
connected device.
Out of range
Point the remote contro closer to the
infrared receiver on the unit within
16 feet, +/-30 degrees,make sure
there are no obstacles in between
The batteries in the remote
control are drained
Replace with new battery
The external device is
too far from the unit
Put the external BT device close
to the unit.
Have not paired
Pair the unit with the BT Device as
the procedures stated in this manual.
GENERAL SPECIFICATIONS
Power input .......................................................................................................AC100~240V, 50/60Hz
Power output ....................................................................................................DC16V 1.8A
Audio output .....................................................................................................2x10W+20W
Bluetooth effextive working range in open area...........................up to 32 feet
Remote effective working range............................................................up to 16 feet
12
Federal Communications
Commission Statement
FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired
operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC STATEMENT:
To assure continued operation, follow the attached installation instructions and
13
use only shield cables when connecting to other devices. Changes or modifications
not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR
BACK). NO USER SERVICEABLE PART INSIDE, REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
DANGEROUS VOLTAGE:The lighting flash with arrowhead
symbol within an equilateral triangle is intended to alert the us er
to the presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
ATTENTION:The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the appliance.
Before using the unit, be sure to read all operating instruction carefully, please
note that these are general precautions and may not pertain to your unit. For
example, this unit may not have the capability to be connected to an outdoor
antenna.
1. Read these instructions
All the safety and operating instructions should be read before the appliance is
operated.
2. Keep these instructions
The safety and operating instructions should be kept for future reference.
14
3. Heed all warnings
All warnings on the appliance and in the operating instructions should be
adhered to.
4. Follow all instructions
All operation and use instructions should be followed.
5. Do not use this apparatus near water
The appliance should not be used near water; for example, near a bath tub,washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming
pool.
6. Clean only with dry cloth
The appliance should be cleaned only as recommended by the manufacturer.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Outdoor antenna grounding
If an outside antenna is connected to the product, be sure the antenna system
is grounded so as to provide some protection against voltage surges and built
up static charges. Section 810 of the National Electric Code ANSI/ NFPA 70
provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead- in wire to an antenna discharge
product, size of grounding conductors, location of antenna- discharge product,
connection to grounding electrodes and requirements for the grounding
electrodes.
9. Service
Do not attempt to service this product yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
is a trademark on a registered trademark of Bluetooth
SIG Inc. All other trademarks and trade names are
those of their respective owners.
15

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Format                          : application/pdf
Title                           : SBB-036P3说明书
Metadata Date                   : 2018:03:22 16:09:38+08:00
Modify Date                     : 2018:03:22 16:09:38+08:00
Create Date                     : 2018:03:02 09:05:58+09:00
Creator Tool                    : Adobe Illustrator CC (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 72
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 7756 bytes, use -b option to extract)
Instance ID                     : uuid:67c66e11-9cf7-4e20-9030-50a1c48a48a5
Document ID                     : xmp.did:dafa1648-3281-c54a-bcea-d1f5e0fd05ce
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:cb53304c-a556-b849-be91-78eb2d7fa061
Derived From Document ID        : xmp.did:cb53304c-a556-b849-be91-78eb2d7fa061
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:48b94d5d-d219-a54f-80c2-b39430af6d59, xmp.iid:dafa1648-3281-c54a-bcea-d1f5e0fd05ce
History When                    : 2018:02:23 11:34:13+08:00, 2018:03:02 09:05:53+08:00
History Software Agent          : Adobe Illustrator CC (Windows), Adobe Illustrator CC (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : E:\2018\2月\音响图(需要加丝印)\32英寸\32英寸\32英寸-123.490.jpg, E:\2018\2月\音响图(需要加丝印)\32英寸\32英寸\32英寸-123.490.jpg, E:\2018\2月\音响图(需要加丝印)\32英寸\32英寸\场景图.jpg, E:\2018\2月\音响图(需要加丝印)\32英寸\32英寸\横向放置图片.jpg, E:\2018\2月\音响图(需要加丝印)\32英寸\32英寸\横向放置图片.jpg, E:\2018\2月\音响图(需要加丝印)\32英寸\32英寸\横向放置图片.jpg, E:\2018\2月\音响图(需要加丝印)\32英寸\32英寸\32英寸-123.480.jpg, E:\2018\2月\音响图(需要加丝印)\32英寸\32英寸\32英寸-123.480.jpg, E:\2018\2月\音响图(需要加丝印)\32英寸\32英寸\32英寸-123.480.jpg, E:\2018\2月\音响图(需要加丝印)\32英寸\32英寸\32英寸-123.496.jpg
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 130.000000
Max Page Size H                 : 185.000000
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT, Helvetica, PFDinTextCondPro-Thin, PFDinTextCondPro-Bold, Batang, ArialMT,Bold
Font Family                     : Arial, Arial, Helvetica, PF Din Text Cond Pro, PF Din Text Cond Pro, 바탕, ArialMT,Bold GBpc-EUC-H
Font Face                       : Regular, Bold, Regular, Thin, Bold, Regular, GBpc-EUC-H
Font Type                       : Open Type, Open Type, TrueType, TrueType, TrueType, TrueType, Unknown
Font Version                    : Version 5.06, Version 5.06, Version 1.3 (Hewlett-Packard), Version 2.005 2005, Version 2.005 2005, Version 5.00, Version 5.018;PS 5.007;hotconv 1.0.68;makeotf.lib2.5.35818
Font Composite                  : False, False, False, False, False, False, False
Font File Name                  : arial.ttf, arialbd.ttf, Helvetica.ttf, PFDinTextCondPro-Thin.ttf, PFDinTextCondPro-Bold.ttf, batang.ttc, AdobeHeitiStd-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 649 U
Swatch Group Name               : 默认色板组, 灰色, 明亮
Swatch Group Type               : 0, 1, 1
Swatch Colorant Swatch Name     : 白色, 黑色, CMYK 红, CMYK 黄, CMYK 绿, CMYK 青, CMYK 蓝, CMYK 洋红, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, PANTONE 649 U, PANTONE 300 C, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0
Swatch Colorant Mode            : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, Lab, Lab, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK
Swatch Colorant Type            : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS
Swatch Colorant Cyan            : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 15.000000, 0.000000, 0.000000, 0.000000, 0.000000, 5.000000, 20.000000, 50.000000, 75.000000, 85.000000, 90.000000, 75.000000, 80.000000, 70.000000, 85.000000, 100.000000, 100.000000, 75.000000, 50.000000, 35.000000, 10.000000, 0.000000, 25.000000, 40.000000, 50.000000, 55.000000, 25.000000, 30.000000, 35.000000, 40.000000, 40.000000, 50.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 85.000000, 100.000000, 60.000000
Swatch Colorant Magenta         : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000000, 80.000000, 50.000000, 35.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 10.000000, 15.000000, 50.000000, 95.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 25.000000, 45.000000, 50.000000, 60.000000, 40.000000, 50.000000, 60.000000, 65.000000, 70.000000, 70.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000000, 10.000000, 90.000000, 90.000000
Swatch Colorant Yellow          : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000000, 85.000000, 95.000000, 100.000000, 85.000000, 90.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 75.000000, 45.000000, 0.000000, 0.000000, 5.000000, 25.000000, 0.000000, 0.000000, 35.000000, 50.000000, 20.000000, 40.000000, 50.000000, 60.000000, 65.000000, 65.000000, 75.000000, 80.000000, 90.000000, 100.000000, 80.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 95.000000, 100.000000, 0.000000, 0.003100
Swatch Colorant Black           : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 5.000000, 25.000000, 40.000000, 0.000000, 10.000000, 25.000000, 35.000000, 50.000000, 70.000000, 100.000000, 89.999400, 79.998800, 69.999700, 59.999100, 50.000000, 39.999400, 29.998800, 19.999700, 9.999100, 4.998800, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003100
Swatch Colorant Tint            : 100.000000, 100.000000
Swatch Colorant L               : 91.372551, 35.686275
Swatch Colorant A               : -1, -10
Swatch Colorant B               : -4, -62
Producer                        : Adobe PDF library 10.01
Page Count                      : 16
Creator                         : Adobe Illustrator CC (Windows)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: OKUSBB70759

Navigation menu