Keeson Technology SFDK16 Remote Control User Manual
Jiaxing Shufude Electric Bed Co., Ltd. Remote Control Users Manual
Users Manual
![](/img.php?id=982460&img=bg1.png)
The Instruction for the Remote Control
(SFD-K-16-A, SFD-K-16-B)
Press any button: back light will automatically turn on or off by itself in 5 seconds. The timing
light will automatically turn off, timing memory remains unchanged.
Press ON/OFF button: foot or head massage, the massage unit will start or stop.
Press TIMER button: this will set the massage timer in 10 minute intervals with each press of
the button (10, 20, 30 minutes). When the timing is over, all massage motors will automatically
stop. There are three red timing lights. The first light indicates 10 minutes. The second one
indicates 20 minutes. The third one indicates 30 minutes.
Press ALL OFF button: all the vibrating motors will stop working.
Press HEAD button: control the rise and fall of the headboard.
Press FEET button: control the rise and fall of the footboard.
Press FLAT button: under any position, the bed will return to flat position.
Press ZERO G: return to the ZERO G position automatically.
Press M1, M2, M3 button: to choose vibrating strength.
Adjust the frequency: adjust the frequency code could set 16 different frequencies.
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.