LG Electronics USA DT-KK PERSONAL COMPUTER User Manual
LG Electronics USA PERSONAL COMPUTER Users Manual
Contents
- 1. USERS MANUAL 1
- 2. USERS MANUAL 2
- 3. USERS MANUAL 3
- 4. USERS MANUAL 4
USERS MANUAL 1
P/N:3828BPH013A KKseries Rev.00 KK series P/N: 3828BPH013A(Rev.00) Copyright 2005 LG Electronics, Inc., DigitalMate Co., Ltd. Thank you for using the LG product. LG has manufactured and tested this product to provide you with a reliable computing environment. Please read this manual carefully before using the computer. This sign calls attention to features and operations that may be dangerous to the user. Follow the instruction closely to reduce the risk of bodily harm or damage to the equipment 1.Warning: Not following the instruction could result in death or serious injury. 2.Caution: Not following the instruction could result in minor or moderate injury and/or damage to the product. This User's guide is for KK model. Instructions may be different depending on models. Check your model before reading User's guide. Keep User's guide at a place where other users always can reach Þ Microsoft, MS, MS-DOS, and Windows are trademarks of Microsoft Corporation. Þ IBM, IBM Personal Computer, PS/2 and PC AT are trademarks of International Business Machine Corporation. Þ Memory Stick and are trademarks of Sony Corporation, and other company names and product names are registered trademarks of legitimate owners. Þ Memory Stick is a trademark of LG. Þ Copyright 2005 LG Electronics, Inc., DigitalMate Co., Ltd Þ Information in this manual may include technical inaccuracies or typographical errors. Images in this manual are for illustrative purposes only and may be different from the actual product. Þ LG reserves the rights to make improvements and/or changes to the product without notice. Þ Reproducing any or all of the information contained in this publication without written permission is prohibited. Þ This computer complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Contents Important Safety Instructions .................................................................................................. 2 1. Installing the system 1-1 Contents of the Product .......................................................................................................................... 9 1-2 Composition ........................................................................................................................................... 10 1-3 Installation .............................................................................................................................................. 15 1-4 Connecting Peripheral Devices (To Be Separately Purchased) ............................................................ 17 2. Using the system 2-1 Turning on the Computer ....................................................................................................................... 20 2-2 Using Windows XP................................................................................................................................. 23 2-3 Turning off the Computer ....................................................................................................................... 30 2-4 Rebooting the Computer ........................................................................................................................ 31 2-5 Using the Mouse .................................................................................................................................... 32 2-6 Cleaning the Mouse ............................................................................................................................... 34 2-7 Using the Keyboard................................................................................................................................ 35 2-8 Using the CD-ROM Drive....................................................................................................................... 37 2-9 Using the Disk Drive............................................................................................................................... 39 2-10 Computer Virus .................................................................................................................................... 41 3. System Setup 3-1 Entering System Setup .......................................................................................................................... 46 3-2 Booting with a USB drive ....................................................................................................................... 48 3-3 Setting a Password ................................................................................................................................ 49 3-4 Deleting or Changing a Password ......................................................................................................... 50 3-5 Initializing System Setup ....................................................................................................................... 52 3-6 Deciding the Temporary Booting Orders................................................................................................ 53 3-7 Setting the Power Saver Mode .............................................................................................................. 54 3-8 Using Hyper-Threading Feature............................................................................................................. 55 4. System Recovery................................................................................................................. 56 5. Reinstallation of Drivers 5-1 Reinstalling Printer driver ....................................................................................................................... 58 5-2 Reinstalling Sound driver ....................................................................................................................... 62 5-3 Reinstalling Video driver ........................................................................................................................ 63 6. System Expansion 6-1 Opening the Computer Case ................................................................................................................. 64 6-2 Main Board ............................................................................................................................................ 65 6-3 Internal Connectors................................................................................................................................ 66 6-4 Replacing the CPU................................................................................................................................. 68 6-5 Expanding the Computer Memory ........................................................................................................ 70 6-6 Adding a Hard Disk ................................................................................................................................ 74 6-7 Installing an Expansion Card ................................................................................................................. 82 Product Specifications ....................................................................................................... 84 Contents Important Safety Instructions Following instructions are to help users to use the product safely and properly and to prevent any potential risk or damage. Please read the following instructions carefully before using the product. Installation Do not use the product in damp places including a laundry room and bathroom. The computer may not function correctly, and there is the risk of electric shock. Operate the computer within a temperature range of 41 to 95ĕ (5Ë~35Ë) and 30 to 80% of relative humidity Dispose of its desiccating agent and vinyl packages properly. A child may get suffocated by swallowing the desiccating agent or wearing the packages on head. Use the product in a dust-free environment. Otherwise, the product may malfunction. Do not place any mechanical interference within a 15cm radius of the computer. The computer may be heated from inside and result in a burn. Keep away from the moisture condensation. It may damage on the computer. If this happens, turn off the computer and make it dry before power is on Operate the product in a place without electromagnetic interference. Keep a proper distance between the computer and such electronic appliances as speakers that generate strong magnetic fields. Otherwise, data stored on the hard disk may be lost or the display color on the monitor may be impaired. Important Safety Instructions Power Connection Do not use loose plugs or damaged power cords. An electric shock or fire may occur. Operate the product at the proper voltage. Excessive voltage may result in damage on the product, electric shock or fire. Use a socket with an earth pin equipped. If not earthed, the product may cause an electric shock and get damaged. Use power outlets with an earth pin installed and proper supply of rated elec tricity. An electric leakage may cause an electric shock or fire. Do not touch the power cord with your hands wet. There is a possibility of an electric shock. In the case that a strange noise is heard from the cord or plug, disconnect the power cord from the outlet immediately and contact the service center. A fire or electric shock may occur. Tightly connect the power cord to the outlet. Loose connection of the power cord could cause a fire. Pull the plug, not the cord, to disconnect the power. Otherwise, a fire may occur or the product may get damaged. Always keep the power cord and the outlet clean. A fire may occur. In the case that a watery or other alien substance enters inside the computer, disconnect the power and contact the service center. Damaged parts may cause a fire or electric shock. Important Safety Instructions Use a socket with an earth pin equipped. If not earthed, the product may cause an electric shock and get damaged. Use power outlets with an earth pin installed and proper supply of rated elec tricity. An electric leakage may cause an electric shock or fire. Do not impair the cord by excessive bending or hard pressing. Keep the power cord out of reach of children and pets. A damaged power cord may cause an electric shock or fire. Using the Computer Clean the computer with proper detergent and dry it completely before using it again. Otherwise, a fire or electric shock may occur. Disconnect the power and the Internet line from the modem, the LAN card and others in case of a lightning strike. An electric shock or fire may occur. Do not leave a cup or other containers filled with chemical or water near the computer. In the case that liquid is spilt inside the computer, a fire or electric shock may occur. Do not connect a key-phone line to the modem. A fire may occur or the product may get damaged. In the case that the computer is dropped or get damaged, disconnect the power and contact the service center. If a damaged computer is used continuously, an electric shock or fire may occur. Do not expose the computer to direct sunlight. The product may be deformed or caught on fire due to a temperature rise. Important Safety Instructions Do not put a lit candle or burning cigarette on the computer. A fire may occur or the product may get damaged. If you smell or see smoke from the computer, stop using the computer and dis connect the power before contacting the service center. A fire may occur. Please ask one of our engineers to check the operational state after your com puter has been repaired. Otherwise, there exists a possibility of an electric shock or fire. Leave the product away from heat-generating devices such as a heater. The product may get deformed or catch on fire. Before turning on the system, switch on peripheral devices. Otherwise, the product may get damaged. Turn off the system before switching off peripheral devices. Otherwise, the product may get damaged. Connect allowed devices only. Otherwise, the product may get damaged. Do not use a damaged CD-ROM disk or floppy disk. Otherwise, the product may get damaged or an injury may occur. It is recommended not to use a wireless LAN connection within a 5m radius of a microwave or plasma light. If you have to use wireless LAN and a plasma bulb within the range, however, do it through a channel between 11 and 13. Still, the connection may not be made, or the transmission rate may drop. Do not press "Eject" button while the Floppy/CD-ROM drive is running. The data may be lost or the disk may spin out unexpectedly to cause an injury. Insert a memory card in the correct direction. A forceful insertion of the memory card may damage the product and the memory. Do not drop a part or device of a computer when ejecting it. If dropped, they may get damaged and cause an injury. Important Safety Instructions Storing and Moving the Computer Before moving the computer, turn off the power and disconnect all cables. If not, one may trip over the wire, damaging the computer and getting an injury. Upgrading the Computer When disassembling the computer, do not take out the power supply unit and prevent children from swallowing nuts unscrewed. If a child swallowed a nut, they may get suffocated. In that case, see the doctor immediately. Do not disassemble the power supply unit. You may get an electric shock. Before disassembling the product, turn off the system and disconnect the power cable. In case the telephone line is connected to the modem, disconnect the telephone line also. An electric shock or fire may occur. Do not disassemble or moderate the computer arbitrarily. An electric shock may occur. When handling computer parts, follow the instructions included in the manual. Soldered prickles on the board may cause an injury. Please use parts certified by LG Electronics. A fire may occur or the product may get damaged. Please contact our service center before you connect an peripheral device not manufactured by LG Electronics to your computer. The product may get damaged. Important Safety Instructions Safety Notes to Prevent Data Loss (HDD Management) Handle the computer with care to prevent a data loss. Since the hard disk is sensitive to shocks, please make a back-up file of important data all the time. Þ The manufacturer will not be responsible for any hard-disk data loss caused by a user's mistake. Þ Hard disk damage and data loss may occur when. External shocks are given on the computer while the computer is separated or installed. The computer is reset (rebooted) due to a power failure while the hard disk is running. Þ The computer is infected with a virus, tainting the data recoverably. Þ The power is abruptly disconnected. Þ Moving, shaking or pounding the computer while the hard disk is running, and thus causing file damage or bad sectors. Þ Þ It is recommended to back up the data to minimize damage caused by hard disk damage. The manufacturer is not responsible for any data loss. Important Safety Instructions Help and Support Click the "Help and Support" menu to learn Windows operation and troubleshooting, and receive technical supports. Please read the menu before using the computer. ⓞ Click [Start] button, and then Help and Support. ⓟ Then, the following screen will appear. Suggested items, text search result, Microsoft Knowledge Base and other contents are investigated. Microsoft Knowledge Base is supported only when the Internet is connected. By selecting proper items, the user can check functions of Windows XP and troubleshooting. Help and Support Through the Internet connection, the user can ask others for a help and receive the telephone number of the technical support center. The user can configure the optimal environment for computers. 1.Installing the system 1-1. Contents of the Product Contents and the front design of the product may differ by model. Be sure to use designated cleaning chemicals to clean your computer. Use of other chemicals such as thinner, benzene or alcohol may cause damage or deformation of the product. Computer Power Cord Modem cable Keyboard User's guidel LG GILJABI CD (Software installation CD) Mouse Troubleshooting guide Recovery CD Installing the system 1-2. Composition Front Part ℛ ℚ ℜ ℡ ℘ ℙ ℝ ℞ ℟ ℠ 10 Installing the system ℝ USB (USB 1.0 Port) Connector Connects USB devices or hubs (including a USB mouse or digital camera). ℞ IEEE1394 Connector Connects IEEE 1394-4 4-pin devices (including a camcorder). ℟ Sound Connector Earphone Connector A port for external earphones. Microphone Connector A port for external microphone. ℠ Multimedia Card Slot Hosts various portable memory cards - CF, MD, MS, MS-PRO, SD, MMC, SMC and others. ℡ Support The support of for stable installation of the main body of the computer. Each slot is marked with a symbol indicating proper card types that can be accommodated. Check the symbol and insert a right type of memory card in the direction as shown in the figure. Do not delete [Safely Remove Hardware] ( ) icon. Otherwise, the computer needs rebooting to use the memory card slot. ã Remove the support to use your computer laid down. ã To use the computer with the body standing, install the support. Otherwise, the system may function unstably. Note ã Optional parts differ by product model. For more information about optional parts, see Option Guide of GILJABI CD. Basics 11 Rear Part ℘ ℙ ℚ ℛ ℝ ℜ ℞ ℟ ℠ ℡ ⌅ Note ãThe rear configuration may differ from the image depending on product model. 12 Installing the system ℘ Computer Power Connector Connects the power cord to provide power to the computer. ℙ Keyboard Connector Connects a PS/2 keyboard. ℚ Mouse Connector Connects a PS/2-type mouse. Do not disassemble power supplies. There is a risk of electrical shock. ℛ Serial Connector A serial communication connector to exchange data between the computer and external devices. ℜ Video Connector Connects the monitor cable to use a built-in video. Does not function when a video card is installed. ℝ Parallel Connector Parallel communication connector to transmit data from the computer to external devices, mostly to the printer. ℞ USB (USB 2.0 Port) Connector Connects USB devices or hubs such as USB mouse or digital cameras. ℟ LAN Connects other systems and hubs through the UTP at 10/100/1000 Mps. ℠ Sound Connector External Speaker Connector Hosts an external speaker Connector. Line Input Connector Hosts an external audio Connector. Microphone Connector Hosts an external microphone Connector. ≕ Digital Sound Output Port (S/PDIF) An optic output port to produce digital sound. Note ã Modem cable is offered for models that support modem card. Installing the system 13 1-3. Installation Installation is not difficult, and we recommend users to install by themselves. Before installation, turn off the computer and all peripheral devices. As the keyboard and the mouse use same-shaped connectors, please check the symbols next to the mouse connector hole and the keyboard connector hole. Card composition is different from product to product. ℚ ℘ ℙ ℛ ãDo not leave a liquid container on the computer. An electric shock may occur and the system could break downr. ãKeep the ventilation hole of the power supply unit free of alien substances. Internal parts of the computer may get damaged and an electric shock may occur. 14 Installing the system ℘ Connecting the Keyboard The connector of the keyboard cable is round in shape and consists of 6 pins. Insert the keyboard connector pin correctly in the keyboard connector hole on the rear panel of the computer. Insert the keyboard cable connector as shown in the figure. ℙ Connecting a Mouse The mouse cable has a round connector with 6 pins. The round connector on the mouse cable fits into the PS/2 connector on the rear of the computer. Be sure to align the 6 pins on the cable with the corresponding holes on the connector. ℚ Using the Keyboard Support Installed at the bottom of the keyboard. Raise the keyboard supports to relieve fatigue on the wrists. ℛ Connecting Power Power supply is 110V/220V (selection) or 220V only. Connect the power cord to the computer and the outlet on the wall. ã Power supply is 110V/220V (selection) or 220V only. ã Check the location of the switching button when 110V/220V (selection) is used. 220V use 110V use ã Operate the product at the proper voltage when selecting 110V or 220V power supply. Incorrect use of power supply may damage on the product or fire. Installing the system 15 1-4. Connecting Peripheral Devices (To Be Separately Purchased) ℘ ℚ ℝ ℙ ℘ ℞ ℜ ℛ ãDo not connect too many cables to one extension cord. An electric shock may occur. ãDo not leave the power cord below the body. ãDo not touch the outlet when connecting or disconnecting the power cord. An electric shock may occur. Note ã The digital 5.1 channels require following environments. - Title recorded at 5.1 channels (DVD titles with DTS or Dolby Digital 5.1 marks) - DVD-playing program supporting digital 5.1 channels (for example, Power DVD 4.0 or higher) - A/V receiver or digital speaker supporting digital 5.1 channels (Only optic ports are supported.) - Basic specification is 5.1CH 48KHz, and 7.1CH 96KHz is optional. 16 Installing the system Connecting Monitor (To Be Separately Purchase) The monitor signal cable and the power cords are included in the package box. For more information about using the monitor, see the monitor manual. When using a built-in video When the video card is installed ℘ Connect the monitor signal cable to the Video port to transmit computer signals to the monitor. ℙ Connect the monitor power cable both to the monitor and the power outlet to supply power to the monitor. When turning on/off the computer, turn on/off the monitor. When using the same power supply unit for the computer and the monitor, check the voltage of the monitor before turning on. Connecting the Printer (To Be Separately Purchased) The printer cable and the power cords are included in the package box. For more information about using the printer, see the printer manual. ℚ Connect the printer cable to a parallel connector of the computer. (However if the printer supports USB ports, connect it to the USB connector.) ℛ Connect the other end of the printer cable to the printer parallel connector. ℜ Connect the power cord of the printer to the printer power connector. ℝ Connect the power plug of the printer to the power outlet. Connecting an Optical Output Port (To Be Separately Purchased) The user can listen to digital sound through optical output speakers using S/DIF function. ℞ Connect the optical cable to speakers with optical output port using S/PDIF function. Installing the system 17 Connecting the Speakers (To BE Separately Purchased) This product is not equipped with speakers. To output sound, connect external speakers. ℟ Connect the speaker connector to External Speaker ( on the rear panel of the computer. ) connector Note ãIn the case where sound is to low or mute, adjust the volume by clicking on the [Master Volume] icon on the right end of the Windows task bar. 18 Installing the system PHPR Installing the system 19 2.Using the System 2-1.Turning on the Computer Check if the floppy disk drive on the front part of the computer is empty and the power cord and the peripheral devices are connected to the computer on the rear panel. After installing the system, register user information. Turn on the power of the main body, and register user information by following the Windows screen instructions. Registration process ⓞ Pressing the power switch starts the self-diagnostic procedures; then Windows(R) XP startup screen is displayed .In a moment, a dialogue box, saying Welcome to Microsoft Windows appears on the screen. Then Click [Next]. ⓟ After Help protect your PC message appears on the screen, select Help protect my PC by turning on Automatic Updates now and then press [Next]. 20 Using the system ⓠ Internet connection option screen appears, follow the instruction. ⓡ If you turn the power on the computer for the first time, you have to register your copy of Windows XP. The registration process may differ depending on the model, but the difference does not affect the use of your computer. ⓢ Who will use this computer? message appears on the screen. Type the namesof the users and click [Next]. Using the system 21
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 23 XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:8e380463-32bb-4021-8a46-9165b9846d2c Modify Date : 2005:02:14 10:27:34-05:00 Create Date : 2005:02:14 10:27:24-05:00 Metadata Date : 2005:02:14 10:27:34-05:00 Document ID : uuid:82934ec5-589d-4778-ae97-d2c100939963 Format : application/pdf Title :EXIF Metadata provided by EXIF.toolsCreator : PScript5.dll Version 5.2.2 Author : Owner Producer : Acrobat Distiller 5.0.5 (Windows)