LIXIN TECHNOLOGY CO INATECKP6 Barcode Scanner User Manual P6 12 9 V11
SHENZHEN LIXIN TECHNOLOGY CO ., LTD Barcode Scanner P6 12 9 V11
User Manual
User Guide P6 Barcode Scanner English Product Overview Laser Window Trigger Buzzer Power Switch USB Port LED1 LED2 Shockproof Cover Use of Inateck P6 Startup Note: 1) Inateck P6 will start sleep mode if there is no operation on it over 3 minutes. Short press on the trigger can wake it up. 2) When the distance between Inateck P6 and its adapter exceeds the effective range, scanned data will be kept in the buffer of Inateck P6. Quickly double press on the trigger can upload data from buffer. Wireless Mode: 1. Insert the 2.4G USB adapter into the USB port of computer. The initialization is completed if blue LED on the adapter blinks once. 2. Power on Inateck P6 by toggling switch from OFF to ON. Short press the trigger to emit red laser beam and scan barcodes. 3. Open a file on computer and move cursor to the blank where scanning output should be placed. Scanning results can be displayed on computer then. Wired Mode: 1. Connect Inateck P6 with computer via USB cable 2. Power on Inateck P6 by toggling switch from OFF to ON and short press the trigger. Inateck P6 will continuously beep. Beep stops after successful connection. 3. Open a file on computer and move cursor to the blank where scanning output should be placed. Scanning results can be displayed on computer then. Function Setup (Note: The barcode marked by * means default setting of Inateck P6.) Users must read setup barcodes in order to change the default settings in Inateck P6 Barcode Scanner. Scan“Enter setup”barcode; Change scanner setting by scanning certain function setup barcode; Scan “Exit with save” barcode to finish the setup. Status indication Buzzer Indication Beeping Meaning One short high note(100ms) Read barcode successfully One short high note(20ms) Data upload from scanner to Computer One long high note(400ms) Wrong Setup (on setup status, blue LED stays on) Invalid scanning due to full buffer (Scanned barcode not saved.) One or several long high notes (800ms) Three chord sounds USB being configured(It happens when USB cable is inserted) Enter setup mode(Blue LED on) Exit setup mode(Blue LED off) Two short notes(tone from low Correct Setup to high) Two short beeps (tone from The connection between Inateck P6 and high to low) computer is disrupted. LED Indication LED Status Meaning Green LED flashes once (LED2) Barcode successfully read and uploaded to computer Blue LED flashes once (LED2) Barcode successfully read and saved in buffer, but not uploaded to computer Blue LED stays on (LED2) Inateck P6 scanner on setup status Yellow LED blinks(light/shade Low battery ratio0.5s : 0.5s)(LED1) Red LED stays on (LED1) Inateck P6 scanner in charge (Red LED off when battery is full) Frequently Used Barcodes Enter Setup Exit with Save Exit without Save Restore Factory Setting (*)Apply Enter for Suffix Do Not Apply Enter for Suffix (*)Enable Auto Laser-darkening Mode Enable Manual Scanning Mode Enable Continuous Scanning Mode Enable Auto Induction Mode Disable Auto-sleep Mode (*)Enable Auto-sleep Mode 2.4G Paring Lower case for all letters Upper case for all letters (*)Keep original case Setting for Keyboard Language 1. Read Enter setup Barcode Enter Setup 2. Select and Scan your keyboard language Barcode (*)US Keyboard German Keyboard French Keyboard Spanish Keyboard Italian Keyboard 3. Scan Exit with Save Barcode to end language setting Exit with Save Note: The keyboard language of Inateck P6 should keep consistent with that on computer, otherwise, garbled might appear in scanning result. Setting for Prefix/Suffix Users can add prefix/suffix to scanning result. The prefix/suffix can have 1 to 8 digits. More details are as below. 1. Scan Enter setup Barcode Enter Setup 2. Scan Prefix Setting or Suffix Setting Prefix Setting Suffix Setting 3. Scan the character barcode (8 characters at the most). For instance, H# is the prefix/suffix to be added to the scanning result, scan the character barcode of H and # below. 4. Scan Exit with Save Barcode to end the setting Exit with Save Frequently Used Prefix/Suffix Barcodes Tab Backspace Enter Space Note: 1) More prefix/suffix barcodes are available at www.inateck.com. Users can download them from the site. For any other questions, please send email to support@inateck.com. 2) Scanning result will come with prefix/suffix after the setting. Nevertheless, prefix/suffix can be hidden or recovered. To hide prefix/suffix, scan Enter Setup barcode, Hide Prefix/Suffix barcode, and then Exit with Save barcode. To recover prefix/suffix, scan Enter Setup barcode, Recover Prefix/Suffix barcode, and then Exit with Save barcode. (*)Recover Prefix Hide Prefix (*)Recover Suffix Hide Suffix Delete Character(s) on Output Result Inateck P6 can help users delete character(s) on output result, either beginning characters or the ending ones. 0 to 9 digits can be deleted. As default setting, no character, or say 0 digit is deleted as output result. More details are as below. 1. Scan Enter Setup Barcode Enter Setup 2. Scan Delete Beginning Character(s) Barcode or Delete Ending Character(s) Barcode Delete Beginning Character(s) Delete Ending Character(s) 3. Scan the digit(s)barcode to be deleted. (*)0 digit 1 digit 2 digit 3 digits 4 digit 5 digits 6 digit 7 digits 8 digit 9 digits 4.Scan Exit with Save Barcode to end the setting Note: Refer to the setting of delete 0 digit character if no character should be deleted. Inventory Mode Users may use inventory mode to keep scanned barcodes in the buffer of Inateck P6, and upload them to computer in batches. Under inventory mode users are not restricted to the time and location when upload data. Of course, history data can be cleared in buffer. More details about inventory mode are as below. 1. Scan the barcode to enter Inventory Mode Enter Inventory Mode 2. Scan the barcode to return to Common Mode (*)Return to Common Mode 3. Scan the barcode to clear data in buffer (for Inventory Mode only). Clear Data in Buffer(for Inventory Mode only) 4. Scan the barcode to upload data from buffer (for Inventory Mode only) Data Upload (for Inventory Mode only) 5. Scan the barcode to upload the number of scanned barcodes (for Inventory Mode only) Upload the Number of scanned barcodes (for Inventory Mode only) Note: 1) To use inventory mode, users just need scan Enter Inventory Mode barcode; and do not have to scan Enter Setup barcode before that. 2) To end inventory mode, users just need scan Return to Common Mode barcode. Function Setup Barcodes (*)Enable Codabar Disable Codabar Enable Code11 (*)Disable Code11 (*)Enable Code 128 Disable Code128 (*)Enable Code39 Disable Code39 Enable Code 39 Full ASCII (*)Disable Code 39 Full ASCII (*)Enable Code93 Disable Code93 10 (*)Enable EAN-8 Disable EAN-8 (*)Enable EAN-13 Disable EAN-13 Transfer EAN-13 to ISBN (*)Do not transfer EAN13 to ISBN Transfer EAN-13 to ISSN (*)Do not transfer EAN-13 to ISSN Enable MSI (*)Disable MSI (*)Enable UPC-A Disable UPC-A (*)Enable UPC-E Disable UPC-E Enable IATA 25 (*)Disable IATA 25 11 (*)Enable Interleaved 25 Disable Interleaved 25 Enable Matrix 25 (*)Disable Matrix 25 Enable Standard 25 (*)Disable Standard 25 Enable China Post Code (*)Disable China Post Code Enable EAN-2 (*)Disable EAN-2 Enable EAN-5 (*)Disable EAN-5 Hyphen "-" displayed in (*)Without hyphen "-" in ISBN/ISSN/EAN-2/EAN-5 ISBN/ISSN/EAN-2/EAN-5 12 Product Specification Model Number Inateck P6 Indication Buzzer, LED Battery Capacity 2600mAh EEPROM 256K Light Source Laser LED650±10nm Applicable Barcodes Codabar, Code 11, Code 128, Code39, Code 93, EAN-8, EAN-13, ISBN, ISSN, MSI,UPC-A, UPC-E, IATA 25, Industrial 25 / Standard 25, Interleaved 25,Matrix 25, China Postal Code, FedEx,USPS Resolution 3mil Decode Rate 220 times/s Decode Mode Single-Line Aiming Print Contrast 20% Decode Angles Roll 30º,Pitch 75º,Yaw 80º Packing list • • • • Inateck P6*1 USB Cable*1 Instruction Manual*1 2.4GHz Wireless Adapter*1 FAQs 1. Will settings be kept when Inateck P6 is power off? Answer: All settings are made by scanning relevant barcodes, and stored in scanner memory. They are kept even if scanner powers off. They are available to users if scanner powers on. 2. Garbled or error appears in output result? Answer: The default keyboard language of Inateck P6 is English. Please refer to the instruction manual about keyboard language, and set correct one. 3. Is there any barcodes to remove Enter for suffix? Answer: Refer to the Frequently Used Barcodes in instruction manual, and use Do Not Apply Enter for Suffix . 13 4. The data cannot be sent to my computer. Why? a. When the distance between Inateck P6 and its adapter exceeds the effective range, scanned data will not upload to comupter immediately. Instead, it will be kept in the buffer of Inateck P6. Quickly double press on the trigger can upload data from buffer. b. Under Inventory Mode , scanned data will be kept in the buffer of Inateck P6. To upload data to computer, please refer to the use of Data Upload barcode. 5. Some barcodes cannot be read, why? a. Dirty or unclear barcodes might not be read. b. Digital barcodes displayed on screen of phones, computers or tablets cannot be read. c. It is possible that the setting is off by default for some barcode types which are not commonly used. You need activate a specific barcode type to get it working. Please feel free to contact our Customer Service Team for further assistance if you don't know the exact type of barcode that you are referring to. 6. Is the device compatible with android devices? Yes,For Android User: an OTG Adapter is needed for devices without standard USB. Note: If you receive an error of unable to transfer data via the wireless connection (Not applicable for the Inventory Mode), please re-pair the scanner using the following steps. When paring, make sure the distance between Inateck P6 and 2.4G USB adapter is within 2m. Please bear in mind that this process may take 5 seconds. Enter Setup Plug the 2.4G Read Enter Setup adapter into your PC 2.4G Paring Read 2.4G pairing 14 Support Please feel free to email support@inateck.com if you have any query regarding Inateck P6 barcode scanner. We will gladly assist you. Contact Information USA Tel.: +1 513-644-9712 Phone hours: Weekdays 9 AM to 5 PM (EST) Email: support@inateck.com Web: www.inateck.com Addr.: F&M Technology LLC, 9852 Crescent Park Drive, West Chester, OH 45069 USA Germany Tel.: +49 342-07673081 Fax.: +49 342-07673082 Phone hours: Weekdays 9 AM-5 PM (CET) Email: support@inateck.com Web: http://www.inateck.com/de/ Addr.: F&M Technology GmbH, Montgolf ierstraße 6, 04509 Wiedemar 日本 Eメール: support@inateck.com 公式サイト: www.inateck.com/jp/ 住所: F&M株式会社 東京都昭島市拝島町三丁目10番3号 15 Deutsch Produkt Überblick Laserfenster Auslöser Signaltongeber Netzschalter USB Anschluss LED1 LED2 Stoßfeste Abdeckung 16 Verwendung des Inateck P6 Schnellstart Bemerkung: 1) Inateck P6 wird in den „Schlaf-Modus versetzt , wenn über 3 Minuten keine Aktion ausgeführt wurde. Drücken Sie kurz den Auslöser um den Barcode Scanner wieder aufzuwecken. 2) Wenn die Entfernung zwischen dem Inateck P6 und seinem Adapter die effektive Reichweite übersteigt, werden die eingescannten Daten im Zwischenspeicher des Inateck P6 behalten. Ein zweimaliges kurzes Drücken des Auslösers kann die Daten aus dem Zwischenspeicher hochladen. Drahtlos-Modus: 1. Stecken Sie den 2.4G Adapter an den USB-Anschluss Ihres Computers. DiInstallation ist abgeschlossen, wenn die blaue LED an dem Adapter einmal blinkt. 2. Schalten Sie den Inateck P6 ein, indem Sie den Netzschalter von „Aus auf „An umschalten. Drücken Sie kurz den Auslöser, um roten Laserstrahl auszustrahlen und Barcodes zu scannen. 3. Öffnen Sie eine Datei auf ihrem Computer und bewegen Sie den Cursor zu der Stelle, wo die Barcode-Information eingefügt werden soll. Die Scan-Informationen können dann auf ihrem Computer angezeigt werden. 17 USB verkabelter Modus: 1. Verbinden Sie Inateck P6 per USB-Kabel mit ihrem Computer. 2. Schalten Sie Inateck P6 ein, indem Sie zwischen „Aus und „An umschalten und drücken Sie kurz den Auslöser. Inateck P6 wird kontinuierlich piepen. Das Piepen hört auf, wenn die Verbindung erfolgreich war. 3. Öffnen Sie eine Datei auf ihrem Computer und bewegen Sie den Cursor zu der Stelle, wo die Barcode-Information eingefügt werden soll. Die Scan-Informationen können dann auf ihrem Computer angezeigt werden. Einstellung der Funktionen (Bemerkung: Der mit * markierte Barcode bedeutet die Standardeinstellung des Inateck P6.) Die Benutzer müssen die Einrichtungs-Barcodes einlesen, um die Standardeinstellung des Inateck P6 Barcode Scanners zu verändern. Lesen Sie den Barcode „Beginn der Einrichtung“ ein. Sie können die Einrichtung des Scanners verändern indem Sie einen bestimmten Barcode einlesen. Lesen Sie den Barcode „Speichern und beenden“ ein um die Einrichtung zu beenden. 18 Statusanzeige Piep-Töne Anzeige Piepen Bedeutung Ein kurzer hoher Ton(100ms) Barcode wurde erfolgreich gelesen Ein kurzer hoher Ton (20ms) Daten wurden vom Scanner auf den Computer hochgeladen Ein langer hoher Ton(400ms) Falsche Einrichtung (auf dem Setup Status bleibt die blaue LED an) Ungültiges Scannen aufgrund eines vollen Speichers (gescannte Barcodes werden nicht gespeichert) Ein oder mehrere lange hohe USB wird konfiguriert (passiert, wenn das Töne (800ms) USB-Kabel angeschlossen wird) Dreiklang Betreten des Einrichtungs-Modus (blaue LED an) Verlassen des Einrichtungs-Modus (blaue LED aus) Zwei kurze Töne (Ton Einrichtung ist korrekt verändert sich von tief zu hoch) Zwei kurze Töne (Ton Die Verbindung zwischen dem Inateck P6 verändert sich von hoch zu und dem Computer wurde unterbrochen. tief) LED Anzeige LED Anzeige Bedeutung Grüne LED blinkt einmal Barcode wurde erfolgreich gelesen und (LED 2) auf den Computer hochgeladen Blaue LED blinkt einmal Barcode wurde erfolgreich gelesen und im (LED 2) Zwischenspeicher gespeichert, aber nicht auf den Computer hochgeladen Blaue LED bleibt an (LED 2) Inateck P6 befindet sich im Einrichtungs-Status Gelbe LED blinkt(Blinkrate: Batterie ist fast leer 0.5s : 0.5s)(LED 1) Niedriger Batteriestatus Rote LED bleibt an (LED 1) Inateck P6 wird geladen (rote LED schaltet sich aus, wenn die Batterie voll geladen ist) 19 Häufig verwendete Barcodes Beginn der Einrichtung Speichern und Beenden Beenden ohne zu Speichern Auf Werkseinstellungen zurücksetzen (*) Wenden Sie „Enter für Suffix an Wenden Sie nicht Enter für Suffix an Automatischer Ausschaltmodus Aktivierung des manuellen Scan-Modus Aktivierung des kontinuierlichen Scan-Modus Aktivierung des automatischen Einführungs-Modus (*)Aktivierung Automtisches Ausschalten Deaktivierung Automatisches Ausschalten 2.4G Verbindung Alle Buchstaben in Kleinbuchstaben Alle Buchstaben in Großbuchstaben (*)Ursprüngliche Buchstaben halten 20 Einstellung der Tastatur-Sprache 1. Lesen Sie den Beginn der Einrichtung -Barcode ein Beginn der Einrichtung 2. Wählen Sie den ihrer Tastatur entsprechenden Sprach-Barcode aus und scannen Sie diesen ein: (*) US Tastatur Deutsche Tastatur Französische Tastatur Spanische Tastatur Italienische Tastatur 3. Lesen Sie den Speichern und Beenden -Barcode ein, um die Sprach-Einstellungen zu beenden. Speichern und Beenden Bemerkung: Die Sprache der Tastatur des Inateck P6 sollte mit der des Computers übereinstimmen, ansonsten könnte eine Fehlermeldung auftreten. 21 Präfix- und Suffix- Einrichtung Benutzer können Präfix/ Suffix zu ihren Scan-Resultaten hinzufügen. Die Präfix/Suffix können 1 bis 8 Ziffern haben. Weitere Details folgen unten. 1. Lesen Sie den Beginn der Einrichtung -Barcode ein Beginn der Einrichtung 2. Scannen Sie den Präfixkonfiguration oder Suffixkonfiguration -Barcode Präfixkonfiguration Suffixkonfiguration 3. Scannen Sie den Ziffern- Barcode (8 Ziffern maximal) Zum Beispiel: wenn „H# der Präfix/Suffix ist, der zu dem Scan-Resultat hinzugefügt werden soll, scannen Sie den untenstehenden Ziffern- Barcode von „H und „# 4. Lesen Sie den Speichern und Beenden - Barcode ein, um die Einrichtung zu beenden. Speichern und Beenden 22 Häufig verwendete Präfix- und Suffix-Barcodes Tab-Taste Zurücktaste Enter-Taste Leertaste Bemerkung: 1) Weitere Präfix/Suffix-Barcodes befinden sich auf www.inateck.com. Die Benutzer können diese von der Seite herunterladen. Für jede andere Frage, senden Sie bitte eine E-Mail an support@inateck.com. 2) Scan- Resultate erscheinen nach der Einrichtung mit Präfix/Suffix. Dessen ungeachtet können Präfix/Suffix auch verborgen oder angezeigt werden. Um die Präfix /Suffix zu verbergen, scannen Sie den Beginn der Einrichtung -Barcode, den Präfix verbergen / Suffix verbergen -Barcode und schließlich den Speichern und Beenden -Barcode. Um Präfix/Suffix anzuzeigen, scannen Sie den „Beginn der Einrichtung -Barcode, den Präfix anzeigen / Suffix anzeigen - Barcode und schließlich den „Speichern und Beenden -Barcode. (*) Präfix anzeigen Präfix verbergen (*) Suffix anzeigen Suffix verbergen 23 Löschen von Ziffern auf dem ausgegebenen Resultaten Inateck P6 kann Ihnen helfen, Ziffern von den ausgegebenen Resultaten zu löschen, entweder die Anfangs- oder die Endziffern. 0 bis 9 Ziffern können gelöscht werden. In der Standardeinstellung wird keine Ziffer (bzw. 0 Ziffern) auf dem ausgegeben Resultats gelöscht. Weitere Details finden Sie unten. 1. Lesen Sie den Beginn der Einrichtung -Barcode ein Beginn der Einrichtung 2. Lesen Sie den Löschen von Anfangsziffern oder Löschen von Endziffern -Barcode ein Löschen von Anfangsziffern Löschen von Endziffern 3. Scannen Sie den Ziffern -Barcode der gewünschten Anzahl ein (*)0 Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 24 8 Byte 9 Byte 4. Lesen Sie den Speichern und Beenden - Barcode ein, um die Einrichtung zu beenden Bemerkung: Verwenden Sie den „0 -Barcode, wenn keine Ziffer gelöscht werden soll Inventur Modus Nutzer können den Inventur Modus verwenden, um gescannte Barcodes im Zwischenspeicher des Inateck P6 zu behalten und sie schubweise auf den Computer hochzuladen. Im Inventur-Modus sind Nutzer nicht an Zeit oder Ort gebunden, wenn sie die Daten hochladen. Natürlich können veraltete Daten aus dem Speicher gelöscht werden. Mehr Details über den Inventur Modus finden Sie unten. 1. Scannen Sie den Inventur-Modus -Barcode, um den Inventur-Modus zu aktivieren. Inventur Modus 2. Scannen Sie den Standard Modus -Barcode, um auf den Standard-Modus zurückzukommen. (*) Standard Modus 3. Scannen Sie den „Zwischenspeicher löschen -Barcode (nur im Inventur Modus, um die Daten im Zwischenspeicher zu löschen.). Zwischenspeicher löschen (nur im Inventur Modus) 25 4. Scannen Sie den Daten aus dem Zwischenspeicher hochladen -Barcode (nur im Inventur-Modus), um die Daten auf dem Computer hochzuladen. Daten aus dem Zwischenspeicher hochladen (nur im Inventur-Modus) 5. Scannen Sie den Hochladen der Anzahl der gescannten Barcodes (nur im Inventur Modus), um die Anzahl der gescannten Barcodes hochzuladen. Hochladen der Anzahl der gescannten Barcodes (nur im Inventur Modus) Bemerkung: 1. Um den Inventur-Modus zu verwenden, müssen die Nutzer nur den „Inventur Modus -Barcode scannen und nicht noch zuvor den „Beginn der Einrichtung -Barcode. 2. Um den Inventur Modus zu beenden, müssen die Nutzer nur den „Standard Modus -Barcode scannen. Einstellen der Funktionen der Barcodes (*)Aktivierung Codabar Deaktivierung Codabar Aktivierung Code 11 (*)Deaktivierung Code 11 (*)Aktivierung Code 128 Deaktivierung Code 128 26 (*)Aktivierung Code 39 Deaktivierung Code 39 Code 39 Aktivierung (*) Code39 ASCII Deaktivierung Code 93 Deaktivierung Code 93 (*)Aktivierung Code EAN-8 Deaktivierung Code EAN-8 (*)Aktivierung Code EAN-13 Deaktivierung Code EAN-13 Transferieren EAN-13 auf ISBN (*)Transferieren Sie EAN13 nicht auf ISBN Transferieren EAN-13 auf ISSN (*)Transferieren Sie EAN-13 nicht auf ISSN Aktivierung Code MSI (*)Deaktivierung Code MSI 27 (*)Aktivierung Code UPC-A Deaktivierung Code UPC-A (*)Aktivierung Code UPC-E Deaktivierung Code UPC-E Aktivierung Code IATA 25 (*)Deaktivierung Code IATA 25 (*)Aktivierung Code Interleaved 25 Deaktivierung Code Interleaved 25 Aktivierung Code Matrix 25 (*) Deaktivierung Code Matrix 25 Aktivierung Code Standard 25 (*)Deaktivierung Code Standard 25 Aktivierung China Post Code (*)Deaktivierung China Post Code Öffnen EAN2 (*)Schließen EAN2 28 Öffnen EAN5 (*)Schließen EAN5 Hyphen "-" displayed in (*)Without hyphen "-" in ISBN/ISSN/EAN-2/EAN-5 ISBN/ISSN/EAN-2/EAN-5 Produktmerkmale Modellnummer Inateck P6 Anzeige Peip-Ton,LED-Anzeige Batteriekapazität 2600mAh EEPROM 256K, kann Tausende Barcodes speichern Lichtquelle Laser LED650±10nm Unterstützte Barcodes Codabar, Code 11, Code 128, Code39, Code 93, EAN-8, EAN-13, ISBN, ISSN, MSI,UPC-A, UPC-E, IATA 25, Industrial 25 / Standard 25, Interleaved 25,Matrix 25, China Postal Code, FedEx,USPS Auflösung 3mil Dekodierrate 220 Mal pro Sekunde Dekodiermodus Eindimensionaler Zielstrich Druckkontrast 20% Dekodierwinkel Roll 30º,Pitch 75º,Yaw 80º Inhalt des Pakets • • • • Inateck P6*1 USB Kabel*1 Bedienungsanleitung*1 2.4GHz Drathlosadapter*1 29 FAQs 1. Bleiben die Einstellungen erhalten, wenn Inateck P6 ausgeschaltet wird? Antwort: Alle Einstellungen werden durch Scannen der relevanten Barcodes vorgenommen und im Speicher des Scanners behalten. Sie bleiben auch erhalten, wenn der Scanner ausgeschaltet wird. Sie sind vorhanden, wenn der Scanner wieder eingeschaltet wird. 2. Warum enthalten die Scan-Resultate Fehler? Antwort: Die Standard Tastatur-Sprache des Inateck P6 ist Englisch. Bitte schauen Sie in dem Abschnitt zur Sprach-Einstellung nach und stellen Sie die richtige ein. 3. Gibt es einen Barcode, um Suffixkonfiguration zu entfernen? Antwort: Schauen Sie in der Bedienungsanleitung unter „Häufig verwendete Barcodes nach und nutzen Sie Suffixkonfiguration 4. Die Daten können nicht an meinen Computer gesendet werden. Warum ist das so? a. Wenn die Distanz zwischen dem Inateck P6 und seinem Adapter die effektive Reichweite übersteigt, werden die gescannten Daten nicht sofort auf den Computer hochgeladen. Stattdessen werden sie im Speicher des Inateck P6 behalten. Zweimaliges kurzes Drücken des Auslösers lädt die Daten aus dem Speicher hoch. b. Im Inventur-Modus werden die gescannten Daten im Speicher des Inateck P6 behalten. Um die Daten auf den Computer hochzuladen, halten Sie sich bitte an den „Daten Hochladen -Barcode. 5. Warum können einige Barcodes nicht eingelesen werden? a. Dreckige oder unleserliche Barcodes können eventuell nicht eingelesen werden. b. Digital angezeigte Barcodes auf Handys, Computern oder Tablets können nicht eingelesen werden. c. Es ist möglich, dass in der Standardeinstellung nicht so häufig verwendete Barcodes nicht eingelesen werden können. Sie müssen einen bestimmten Barcode-Typ aktivieren, um dies zu ermöglichen. Bitte kontaktieren Sie unseren Kundendienst für weitere Unterstützung, wenn Sie nicht genau wissen, um welchen Barcode-Type es sich handelt. 30 6. Ist das Gerät kompatibel mit Android-Geräten? Ja, für Android-Nutzer wird ein OTG-Adapter benötigt für Geräte ohne standardmäßigen USB-Anschluss. Bemerkung: Wenn Sie eine Fehlermeldung erhalten, dass Daten nicht über die Drahtlosverbindung transferiert werden können (nicht anwendbar im Inventur-Modus), reparieren Sie bitte den Scanner mit Hilfe der folgenden Schritte. Bitte stellen Sie dabei sicher, dass die Entfernung zwischen dem Inateck P6 und dem 2,4G USB Adapter unter 2m beträgt. Beachten Sie außerdem, dass dieser Prozess 5 Sekunden dauern kann. Stecken Sie der 2.4G Adapter an Ihren Computer Beginn der Einrichtung 2.4G Verbindung Lesen Sie den Barcode Beginn der Einrichtung ein Lesen Sie den Barcode 2.4G Verbindung Support Bitte senden Sie eine E-Mail an Support@inateck.com, wenn Sie Fragen zum Inateck P6 Barcode Scanner haben. Wir helfen Ihnen gerne. Contact Information USA Tel.: +1 513-644-9712 Phone hours: Weekdays 9 AM to 5 PM (EST) Email: support@inateck.com Web: www.inateck.com Addr.: F&M Technology LLC, 9852 Crescent Park Drive, West Chester, OH 45069 USA Germany Tel.: +49 342-07673081 Fax.: +49 342-07673082 Phone hours: Weekdays 9 AM-5 PM (CET) Email: support@inateck.com Web: http://www.inateck.com/de/ Addr.: F&M Technology GmbH, Montgolfierstraße 6, 04509 Wiedemar Japan Email: support@inateck.com Web: www.inateck.com/jp/ Addr.: F&M株式会社 東京都昭島市拝島町三丁目10番3号 31 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user’s authority to operate the equipment. This radio transmitter (identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Hereby, SHENZHEN LIXIN TECHNOLOGY CO ., LTD, declares that this Barcode Scanner / Inateck P6, is In compliance with the essential Requirements and other relevant provisions of Directive 1999/5/EC. Environment friendly disposal You can help protect the environment! Please remember to respect the local regulations: hand in the non-working electrical equipments to an appropriate waste disposal centre.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : P6说明书 12-9 V11 Metadata Date : 2017:04:09 19:19:08+08:00 Modify Date : 2017:04:09 19:19:08+08:00 Create Date : 2016:12:12 09:48:33+08:00 Creator Tool : Adobe Illustrator CS6 (Macintosh) Thumbnail Width : 256 Thumbnail Height : 212 Thumbnail Format : JPEG Thumbnail Image : (Binary data 22967 bytes, use -b option to extract) Instance ID : uuid:4d7b7988-a357-4615-b1c3-d814580e4bc9 Document ID : xmp.did:0180117407206811808381D9CA7CDF41 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:3b7b6a42-e8b6-7f45-95dc-018d720689e0 Derived From Document ID : xmp.did:0580117407206811822A81955B6AB103 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:0680117407206811822A8770D4663348, xmp.iid:0180117407206811808381D9CA7CDF41 History When : 2016:10:11 14:58:21+08:00, 2016:12:12 09:48:27+08:00 History Software Agent : Adobe Illustrator CS6 (Macintosh), Adobe Illustrator CS6 (Macintosh) History Changed : /, / Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : False N Pages : 1 Max Page Size W : 79.999251 Max Page Size H : 139.999723 Max Page Size Unit : Millimeters Font Name : ArialMT, TimesNewRomanPSMT, KozGoPr6N-Light, KozGoPr6N-Regular, KozGoPro-Light, KozGoPro-Regular, KozGoPro-Medium, KozGoPro-Bold Font Family : Arial, Times New Roman, 小塚ゴシック Pr6N, 小塚ゴシック Pr6N, 小塚ゴシック Pro, 小塚ゴシック Pro, 小塚ゴシック Pro, 小塚ゴシック Pro Font Face : Regular, Regular, L, R, L, R, M, B Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 5.06, Version 5.05, Version 6.014;PS 6.005;hotconv 1.0.67;makeotf.lib2.5.33168, Version 6.014;PS 6.005;hotconv 1.0.67;makeotf.lib2.5.33168, Version 4.013;PS 4.003;hotconv 1.0.67;makeotf.lib2.5.33168, Version 4.013;PS 4.003;hotconv 1.0.67;makeotf.lib2.5.33168, Version 4.013;PS 4.003;hotconv 1.0.67;makeotf.lib2.5.33168, Version 4.013;PS 4.003;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False, False, False, False, False, False Font File Name : Arial.ttf, Times New Roman.ttf, KozGoPr6N-Light.otf, KozGoPr6N-Regular.otf, KozGoPro-Light.otf, KozGoPro-Regular.otf, KozGoPro-Medium.otf, KozGoPro-Bold.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : 明亮 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000004 Swatch Groups Colorants Magenta : 90.000000 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 10.01 Page Count : 33 Creator : Adobe Illustrator CS6 (Macintosh)EXIF Metadata provided by EXIF.tools