Laird Connectivity 1110200 902-928 MHz FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER User Manual UserMan LT1110200
AeroComm Corporation 902-928 MHz FREQUENCY HOPPING SPREAD SPECTRUM TRANSMITTER UserMan LT1110200
Users Manual
![](/img.php?id=1547909&img=bg1.png)
LT1110-200 Compliance Information
1.1 AGENCY IDENTIFICATION NUMBERS
Family US/FCC CANADA/IC
LT1110-200 KQL-1110200 2268C-1110200
LT1110-200 FAMILY
Part # Description Packaging
PRM240 (+23 dBm), Pluggable with U.FL connector PLG-U.FL
PRM241 (+23dBm), Pluggable with -1dBi integrated antenna PLG-ANT
1.2 APPROVED ANTENNA LIST
LT1110-200 family has been designed to operate with the antennas listed below and having a maximum gain
of 6dBd. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users,
the antenna type and gain should be chosen so that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that permitted for successful communication. The OEM is free to choose another vendor’s antenna
of like type and equal or lesser gain as an antenna appearing in the table and still maintain compliance.
Item Part Number Mfg. Type Gain
1 0915AT43A0026 Johanson Chip -1dBi
2 S467FL-6-PX-915S Nearson Dipole 2dBi
3 FG9026 Laird Technologies Omni 6dBd
4 YS8963 Laird Technologies Yagi 6dBd
1.3 FCC/ IC REQUIREMENTS FOR MODULAR APPROVAL
In general, there are two agency classifications of wireless applications; portable and mobile.
Portable – Portable is a classification of equipment where the user, in general, will be within 20 cm of the
transmitting antenna. Portable equipment is further broken down into two classes; within 2.5 cm of human contact
and beyond 2.5 cm. The LT1110-10 family is not agency approved for portable applications. The OEM is
required to have additional evaluation performed to receive this classification. Contact Laird Technologies for
more details.
![](/img.php?id=1547909&img=bg2.png)
Mobile – Mobile defines equipment where the user will be 20 cm or greater from the transmitting equipment. The
antenna must be mounted in such a way that it cannot be moved closer to the user with respect to the equipment,
although the equipment may be moved.
This equipment has been approved for mobile applications where the equipment should be used at distances
greater than 20 cm from the human body.
1.4 CAUTION
Any changes or modifications not expressly approved by Laird Technology could void the user’s authority
to operate this equipment. The LT1110-200 is a 902-928 MHz Frequency Hopping Spread Spectrum
transmitter. This module is designed to be installed, operated, and used by system integrators and/or
professional installers. As such, the product is required to comply with all applicable FCC equipment
authorization regulations, requirements and equipment functions not associated with the transmitter
module. The OEM is responsible for demonstration of compliance to regulations for non-transmitter
components within the host product to requirements for unintentional radiators (Part 15B), such as digital
devices and to additional authorization requirements for the non-transmitter functions of the transmitter
module (i.e., Verification, or Declaration of Conformity) (e.g., Bluetooth and WiFi transmitter modules).
1.5 NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does not cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
Re-orient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment to an outlet on a circuit that is different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
1.6 OEM EQUIPMENT LABELING REQUIREMENTS
The OEM must ensure that FCC labeling requirements are met. This includes a clearly visible label on the outside of
the OEM enclosure specifying the appropriate identifier for this product as well as the FCC notice below.
Contains FCC ID: KQL-1110200
IC: 2268C-1110200
This enclosed device complies with Part 15 of the FCC Rules, Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Label and text information should be in a size of type large enough to be readily legible, consistent with the
dimensions of the equipment and the label. However, the type size for the text is not required to be larger than
eight point.
1.7 IC TRANSMIT ANTENNAS
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain as authorized for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter 2268C-1110200 has been approved by Industry Canada to operate with the antenna
types listed with the maximum permissible gain and required antenna impedance for each antenna type
indicated. Antenna types not included in the above list, having a gain greater than the maximum gain
indicated for that type, are strictly prohibited for use with this device.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une
antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans
le but de réduire les risques de brouillage adioélectrique à l'intention des autres utilisateurs, il faut choisir
le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse
pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.
Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle
s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les
types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour
chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain
maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
IC License Exempt Radio
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.