MEILOON EVA400300 SCR400D/SPS300/SCR400 User Manual SCR400 SCR400D SCR300 2013 5 24
Meiloon Industrial Co., Ltd. SCR400D/SPS300/SCR400 SCR400 SCR400D SCR300 2013 5 24
MEILOON >
SCR400,SCR400D,SCR300 User Manual 2013.5.24
SPS300 SCR400 SCR400D Instruction Manual Designed and Engineered by TM part number revision code IFC B LANK Congratulations! Key Features – All Models Thank you for selecting the SPS300, SCR400 or SCR400D by AudioXperts. EVA Compact Music Systems are designed and en gineered from the ground up by the AudioXperts team, providing environmentally friendly and aesthetically pleasing tabletop audio systems that deliver great sound to music lovers around the globe. w Unique eco-friendly woven wool cover and bamboo case w Bluetooth with CSR aptX® codec for crystal clear, full band width wireless music streaming w Matching bamboo bent wood dock w USB jack for connection and charging of iPod, iPhone, or iPad w Auto-dimming LCD TFT Display for clean, clear, crisp graphics w Touch sensitive front panel controls w Stereo Headphone output & Auxiliary inputs w Expansion port for connection to EVA +Channel AC250 or PS200 for true stereo performance w IR Remote control w Designed and engineered by AudioXperts This owner’s manual provides you with important information on setting up and enjoying your new music system. Please keep this manual and all packaging materials in a safe place in case you need them at a later date. Technical Specifications Amplifier Power Driver Inputs Output Dimensions 15-watt RMS 4” Full range Optical, 1 / 8 ” mini-stereo and USB audio inputs 1 / 8 ” mini-stereo headphone output 9 1 / 2 x 6 x 5 5 / 8 ” (240 x 152 x 143mm) SCR400 and SCR400D Additional Features SCR400 – High sensitivity FM tuner with 8 presets SCR400D – FM tuner, plus DAB tuner, each with 8 presets Full featured, dual alarm clock Touch sensitive snooze bar Get EVA Set Up Select a location where it will be convenient to connect the power supply, the EVA Dock and any other components you want to connect. With the SCR400(D) you’ll also want space to raise the antenna. There should be a good line-of-sight to the front of the unit so the remote control sensor in the display window can receive signals. Antenna – SCR400(D) only SPS300 Front Panel USB AUX SCR400(D) Front Panel EVA Remote If you want to mount the EVA Dock on the top of your unit, set the adapter in place and secure it with the large thumbscrew. Push the holes in the bottom of the Dock onto the adapter posts. Adjust the support disc on the Dock to hold your phone or MP3 player at the proper angle to minimize stress on the dock connector. The Basic Controls Wireless / Dock Input – Press to select the source connected to the Optical input on the back of the EVA unit. Information from the source appears in the display. Power – Press to turn EV display briefly shows the EVA logo and the date and time, then the last input is recalled. If the time and date have not been set, a reminder message is displayed. USB and Aux Input – SPS300 front panel only. Press to select the USB or Auxiliary AUX inputs. If a USB flash drive with music files is plugged into the USB input, the con tents list appears in the display. When an iOS device is connected to the USB input, using the EVA Dock or a cable, the iPod menu appears in the display. USB Source – Press to display the source USB menu. Press again to highlight the next available source. Press AUTO( AUTO/ ENTER on remote) to select the source. If nothing is connected to the USB input it will not appear on the list. The DAB inputs appear only on the SCR400D. USB iPod > All Playlists Artists Albums Volume +/– Press to change the volume level. A single press changes the volume one step. Press and hold to change the volume two steps per second. Navigation Buttons – SCR400(D) and Remote only – Use to scroll through menu or playlist choices and to select radio stations on the SCR400(D). Press and hold for more than 5 seconds to change the volume very quickly. The display volume indicator changes to reflect the volume adjustments. ENTER/ AUTOon remote, ENTERon SCR400(D) front panel – Mute – Press to temporarily turn the Menu Button – SCR400(D) and remote only – SCR400(D) – Displays the menu to set the alarm functions, the time and date setting function and the Settings menu. The Settings menu lets you adjust the snooze time, alarm sound, display col or, time format and the Region setting, which adjusts the FM radio to operate properly in various parts of the world. FM1 / 2 press , to gently restore the sound level. When the sound is muted, the volume bar indicator in the display is replaced with MUTE. Bluetooth Input – Press to select the Blue tooth input. EVA will look for previously paired devices. When it finds one, the device name appears in the display. If more than one device is available, press the button again the select the next device. If no device is found a notice appears in the display. See the “Bluetooth Connections” and “Bluetooth Pairing” sections for more information. Used to select highlighted choices in various menus and playlists. Starts SCR400(D) radio station seek mode. ALARM ON TIME DATE SETTINGS SPS300 – Press the remote MENUbutton to display the Settings menu, where the display color can be adjusted. Use ▼▲ to highlight the options in the menus, then press MENUagain to select the option. Using the USB Input Bluetooth Connections Typically the USB input is used to connect iOS devices, either via the EVA Dock or directly via a cable. The device is charged while it’s connected to the USB input. A USB flash drive with music files on it can also be connected. When the Bluetooth input is selected, EVA looks for available previously paired devices. When a device is found, its name appears in the display. If more than one device is available, press again to select the next device. If no device is found a warning message appears in the display. Using an iOS Device – When an iOS device iPod > All is connected, its name appears in the display. Playlists Artists The volume control of the device is locked – Albums use the front panel or remote button. Make music selections using the device onscreen controls, as usual. Scroll up or down playlists with ct Bluetooth Pairing Before EVA can make a Bluetooth connection to a device, it must be “paired” with it. First be sure the device you want to pair to EVA is on and its Bluetooth system is active. Then press and hold for two seconds to initiate pairing. When a device is found, its name appears in the display. If the device supports SSP , EVA auto matically pairs with it after two seconds. If the device does not support SSP, then you may need to enter the code “1234” on the device to complete the pairing process. iPod touch (1st - 4th generation)) iPad (3rd generation) iPod nano (4th - 6th gener iation)) iPad, iPad 2 iPhone 4S, 4, 3GS, and 3G There is also a full set of music play controls on the EVA Remote. Press to start or pause play. Press or to skip to the next or previous track. Press and hold or to fast forward or rewind. EVA works with: Using a Flash Drive – When a flash drive is connected the table of contents appears in the display. Use to navigate through the folders and tracks. When a track is highlighted it will start playing automatically after 2 seconds, or when you press AUTO. EVA can pair with six devices. If you have paired with six devices, and then pair with another, the oldest paired device is deleted from the pair device list. Device E 5 Device D 4 Device C 3 Device B 2 Device A 1 Device F To back up a folder level, mute the sound or pause playback, then press on the remote. The other music play controls on the remote operate normally. Press to start or pause play. or to skip to the next or previous track. Press and Press hold or to fast forward or rewind. New Paired Device List Paired Device List Device G Add Device G Device E 4 Device D 3 Device C 2 Device B 1 Device G Device F Device A deleted Device A SCR400 FM Radio Operation SCR400D DAB Radio Operation Press SOURCEto display the source menu. Use FM1 / 2 to highlight FM1 or FM2 in the display, then press ENTER. The last station tuned in is recalled. The FM station group is shown in the upper left of the display. Any RDS data the sta tion is broadcasting appears in the display. If the station tuned in is stored in a preset, the preset number appears in the display. In this example, the station is preset 2 of the FM1 group. Press SOURCEto display the source menu. Use to highlight DAB1 or DAB2 in the display, then press ENTER. The last station tuned in is recalled. The DAB station group is shown in the upper left of the display. If the station tuned in is stored in a preset, the preset number also appears in the display. In this example, the station is preset 4 of the DAB1 group. Manual Station Tuning – Press to tune up or down the radio band. A single press will tune up or down one step. Press and hold the button to rapidly move through the radio band. First Time Use – The first time the DAB radio is used, the system automatically goes into seek mode. The first 8 stations found will be put into the available presets. Auto FM Station Seek – On the front panel, press AUTOto start the seek mode, then press or to start seeking up or down the band. Or press and hold or on the remote to start the seek mode. When a strong station is found it starts playing. 99.50 Mhz Manual Station Tuning – Press AUTOto display a list of available stations. Scroll up or down the list with . After 2 seconds the highlighted station is selected. Using Presets – The SCR400 can store up to 8 FM station Using Presets – The SCR400D can store up to 8 DAB station presets, 4 in each group, FM1 and FM2. To recall a preset station, you must select the FM station group in which the station was stored, then press the appropriate preset button. presets, 4 in each group, DAB1 and DAB2. To recall a preset station, you must select the DAB station group in which the station was stored, then press the appropriate preset button. Storing a Preset – Select the FM station group in which you want to store the station. Tune in the station using Storing a Preset – Select the DAB station group in which you want to store the station. Tune in the station as described above in the Manual Station Tuning section. Press and hold the button for the preset where you want to store the station. When the preset number appears in the display, the preset is stored. In this example the station is stored in the FM2 station group, in preset 4. FM2 107.9Mhz FM2 / 4 107.9Mhz Press and hold the button for the preset where you want to store the station. When the preset number appears in the display, the preset is stored. In this example the station is stored in the DAB1 station group, in preset 4. SCR400(D) Alarm Clock Operation The alarm can be either a radio station or one of two alarm sounds. See the “Adjusting the Settings” section for more information. Turn the Alarm On – Press menu to display the Menu screen. Alarm On is highlighted. Press menu again to turn the alarm on. The symbol appears in the display and the Alarm Time Set screen is displayed. ALARM ON TIME DATE SETTINGS If necessary use to adjust the alarm time. The press menu to set the alarm time and return to the main screen. Using the Auxiliary Input Press source on the remote control or the front panel of the SCR400(D). Use to highlight the Aux input, then press auto/enter on the remote, or enter on the SCR400(D) front panel. On the SPS300 you may use the front panel aux button. Connect a standard 3.5mm stereo cable between the Aux input on the EVA system and the output of the device being connected. Note that the output of some devices can be fairly high. Especially when the headphone output of the device is the source. Keep the volume setting of the device fairly low to prevent overloading the EVA inputs. Turn the Alarm Off – Press menu to display the Menu screen. Alarm Off is highlighted. Press menu again to turn the alarm off. The alarm can also be turned off by touching the Snooze bar on the top of the unit twice within 10 seconds of the alarm sounding. Snooze Functions – When the alarm sounds, touch the Snooze bar to delay the alarm for a 4:55 MINUTES period of time. The display shows the remaining snooze time. The default snooze time is 5 minutes. See the “Adjusting the Settings” section for information on how to adjust the snooze time. If the Snooze bar is touched again before the snooze time has ended, the snooze time is reset and starts counting down again. EVA Dock Connector Cap If you want to use your EVA system with a phone or MP3 player that is not an iOS device, or if you want to use your iOS device horizontally, use the supplied connector cap as shown. Connect the device to the EVA system via Bluetooth or a USB cable. Adjusting Settings SPS300 – Press menu on the EVA remote to show the Display Color selection screen. SCR400(D) – Press menu on the SCR400(D) front panel or the EVA remote to display the Menu screen. Use to highlight Settings, then press menu to display the Settings menu. Again use to highlight the option you want, then press menu to select it. The options are Snooze Timing, Alarm Sound, Display Colour, Time Format and Region. Note: The last two options won’t appear in the menu. Use to scroll down to these options. ALARM ON TIME DATE SETTINGS Time Format – Time can be displayed in 24 or 12 hour format with AM and PM indications. Use to highlight the time format you want, then press auto to select it. Region – The Region setting adjusts the radio frequency range and tuning increments for various part of the world. The options are Europe/Asia, North America and Japan. Use to highlight the appropriate region, then press auto the select it. MENU 12HR 24HR MENU EU/ASIA NA JAPAN Snooze Timing – The default snooze time is 5 minutes. Press to adjust the time setting, then press menu to set the time. If the snooze time is set to 0 minutes, the snooze function is turned off. Alarm Sound – Use to highlight the option you want. After a few seconds the highlighted option will be selected. Or press auto to select it. If Radio is selected, the last selected station preset plays for 5 seconds. Display Colour – Use to highlight one of the display colour options. As the options are highlighted the display colour scheme appears in the display. Press auto the select the display colour scheme and return to the main screen. 5 MINUTES Adding an EVA +Channel Speaker You can connect an EVA +Channel Accessory Speaker to your SPS300 or SCR400(D) to provide true left/right channel stereo sound, or to be a mono extension speaker. The AC250 features an independent full-featured dual alarm clock with a touch sensitive snooze bar. The PS200 simply adds a second speaker. Both units have the same full range speaker and powerful amplifier found in the SPS300 and SCR400(D). Connect the two units with the multi-pin cable supplied with the +Channel speaker and set the mode switch as appropriate. PS200 or AC250 SPS300 or SCR400 set mode switch Limited Warranty Information – Five Years Parts and Labor – Two Years Over the Counter Exchange The AudioXperts warranty protects the original owner, provided the AudioXperts product was purchased within the continental United States, Alaska or Hawaii from an authorized dealer. In all instances a copy of the original “dated” bill of sale must be presented whenever warranty service is required. The warranty is limited to AudioXperts product and does not cover damage to any associated equipment. The warranty does not cover the cost of removal or reinstallation of theproduct. The warranty becomes void if the serial number has legal rights, and you may also have other rights, which vary from state to state. NOTE: Repair of AudioXperts products must be made by an authorized dealer or service center. Unauthorized repair will void the warranty and is done at the risk of the owner. If Service is Required Finished Goods RA Requests: (855)4MY - XPRT (469-9778) x 3, or email sales@audioxperts.com Authorized Warranty/Service Centers, Tech Support and Parts: (855)4MY - XPRT (469-9778) x 22, or email support@audioxperts.com or visit our website at www.audioxperts.com ©2012 AudioXperts, Inc. AudioXperts and EVA are trademarks of AudioXperts, The Bluetooth figure mark, word mark, and combination mark are registered trademarks of Bluetooth SIG. Apple, iPhone, iPod, iPod touch, iPod nano and AirPort Express are trademarks of Apple Inc. registered in the U.S. and other countries. Specifications are subject to change without notice. All rights reserved. Unauthorized use is strictly prohibited. Federal Communications Commission (FCC) Interference Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to have the capability to access information in that form. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. RF Exposure Warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. IC Statement for Canada This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent a-ecter son fonctionnement.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Warning : Invalid secondary xref table Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Create Date : 2012:11:28 12:26:02-05:00 Metadata Date : 2012:11:29 10:26:37-05:00 Modify Date : 2012:11:29 10:26:37-05:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 16549 bytes, use -b option to extract) Instance ID : uuid:66528183-4bb3-1544-89bc-7fb4b8954882 Original Document ID : xmp.did:CFE5FAA9142068118083D34AF9E47C09 Document ID : xmp.id:507870457F2068118083E7B1D06C5101 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:0A59FE357F2068118083E7B1D06C5101 Derived From Document ID : xmp.did:EBB7AC8C112068118083E7B1D06C5101 Derived From Original Document ID: xmp.did:CFE5FAA9142068118083D34AF9E47C09 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2012:11:28 12:26:02-05:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 7.000000 Max Page Size H : 7.000000 Max Page Size Unit : Inches Font Name : FuturaLT-Book, Wingdings-Regular, Futura-Book Font Family : Futura LT, Wingdings, Futura Book Font Face : Book, Regular, Book Font Type : TrueType, Open Type, Unknown Font Version : Version 006.000 , Version 5.03, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895 Font Composite : False, False, False Font File Name : FuturaLT-Book.ttf, Wingdings.ttf, MyriadPro-Regular.otf Plate Names : Black Swatch Groups Group Name : Default Swatch Group Swatch Groups Group Type : 0 Page Count : 11 Creator : Adobe Illustrator(R) 15.0 For : Jeff's Mac, Title : EVA SPS300-SCR400 Manual - for safety_test.pdf Bounding Box : 0 0 504 504 Container Version : 9 Creator Version : 15 Image Height : 504 Image Width : 504 Image Size : 504x504 Megapixels : 0.254EXIF Metadata provided by EXIF.tools