Contents
- 1. User Manual
- 2. User Manual - Statements
User Manual
V5PF Setup Guide Before You Begin Setup Please check that the following are true: • Your Android smartphone or tablet is compatible. (For a more information on compatible devices, visit wrensound.com/compatibility.) English Box Contents • Your WiFi access point or router broadcasts at 802.11g or 802.11n. (An 802.11b only router may be used, but it will stream to only one Play-Fi device.) AC Power Cord Mini USB Charging Cable • You know your wireless network (WiFi) name and password. • Your wireless network is on and functioning properly. Micro USB Charging Cable • Your Wren V5PF speaker is located in an area with ample WiFi signal strength. Power Supply Wren V5PF Safety Instructions & Warranty V5PF Setup Guide Wren V5PF Speaker Wren V5PF Setup Guide PLEASE NOTE: A comprehensive user manual is available for download from wrensound.com/support. It is not included with your Wren V5PF. Connect AC power cord to power supply. Connections Connect power supply to power input on rear of speaker. The power indicator in the center of the power button will flash white for about 10 seconds, then turn off. Setup Button Used to enter various setup modes English Powering On Your Wren V5PF 3.5mm Aux Input Connects any audio source to your Wren V5PF via a 3.5mm audio cable Power Supply Input Connects to the power supply USB Charging Port Connect power supply to AC outlet. Press power button. Charges most smartphones and tablets The power indicator will blink white until the system is ready. When the system is ready, the power indicator will remain white. solid white Standard WiFi setup using an Android smartphone or tablet Launch the Wren Play-Fi App. It will automatically detect any Wren V5PF speakers that are in WiFi Connect Mode. The Wren Play-Fi App will ask you to enter your WiFi network’s password (if required). English Connect to your network — Option A Standard WiFi Setup enables you to set up multiple Wren V5PF speakers at once. For best results, place your Wren V5PF speaker(s) near your router. You may move the speaker(s) after setup is complete. Download and install the free Wren Play-Fi App (search for “Play-Fi”) from the Google Play Store or the Amazon App Store. Connect your Android phone or tablet to the same WiFi network that you want to use to stream music to your Wren V5PF speaker(s). Turn on your speaker(s). The first time you turn on the Wren V5PF, it will start up in WiFi Connect Mode (indicated by the WiFi indicator blinking amber). In this mode, the speaker is broadcasting a signal telling Android devices that it is ready to connect. amber After connecting, your Wren V5PF may perform a software update. This may take several minutes. During the update, do not unplug your speaker, turn off your Android device or leave the network. Steps 7-8, Next Page Problem connecting? Visit wrensound.com/support for additional help. The Wren Play-Fi App will ask you to name your speaker. Choose from preselected names or create your own by choosing “Custom Name” at the end of the name list. To listen to music, simply use the Wren Play-Fi App on your Android device to select the music you want to play. Setting Up Wren V5PF Speakers After Launching the App The Wren Play-Fi App looks for devices in Standard WiFi Setup Mode when it is launched. If you launch the app before connecting the speaker to the WiFi network, go to the app’s home screen, select “Settings” and then “Add Play-Fi Device.” Manually Enabling WiFi Mode You may need to manually enable the speaker’s WiFi Mode if any of the following conditions apply: • If this is not your first time setting up the speaker • If you’re in a new location with a different WiFi network English Connect to your network — Option A (cont.) To manually enable WiFi Mode, hold down the setup button on the rear of the speaker for eight (8) seconds. The WiFi light will blink once per second indicating that WiFi Setup Mode is active. blinking amber • If you want to switch from your current WiFi network to a different one Selecting a Different WiFi Network To move your speaker to a different location, power it off, move it to where you want to listen, and power it back on. If you want to connect the speaker to a different WiFi network, open the Wren Play-Fi app and press the “Alternative Network” button on the “Enter Network Password” screen. Connect to your network — Option A English WiFi Protected Setup (WPS) using an Android smartphone or tablet WiFi Protected Setup (WPS) is a feature on some WiFi routers that allows the Wren V5PF speaker to automatically and securely connect without needing to enter a password. WPS is not a standard feature on all routers, and only one Wren V5PF speaker can be set up at a time. Check your router’s owner manual to see if WPS is a feature, or look for a button on your router marked with the WPS logo . If your router does not have WPS, then use Standard WiFi Setup. (See “Option A” in the prior section.) If your router has WPS, you can follow the WPS instructions in the Wren Play-Fi App, or use the following instructions. Plug in the Wren V5PF speaker near your router. Wait approximately 20 seconds for the speaker to fully power on (when the power indicator light stops blinking). solid white Press the setup button on the rear of the product two times. The WiFi indicator will blink amber two times, then pause every second. The speaker is now in WPS Mode. Place your router in WPS Mode. Usually this is done by holding the router’s WPS button, but check your router owner’s manual. When the secure connection is made, the Wren V5PF’s WiFi indicator will stop blinking and remain steadily lit. solid white How To Exit WPS Mode If you ever need to exit WPS Setup Mode, press the WiFi button once. The speaker will then return to its previous mode. blinking amber amber Problem connecting? Visit wrensound.com/support for additional help. 10 11 Using Play-Fi Once you have successfully set up your Wren V5PF speaker, you are ready to enjoy your music wirelessly. Simply launch the Wren Play-Fi App on your Android device. The App will verify the connection with all Play-Fi speakers on your network. It’s that simple. Select the speaker(s). Select your music. Choose a single speaker in one room, or link all your speakers for a whole-home listening experience. You can control the volume of each speaker independently using the individual speaker volume controls, or control all speakers simultaneously using the master volume control. See every song stored on your device, (searchable by album, artist, genre or folder). Or choose from one of the integrated streaming audio services. English How Does Play-Fi Work? More streaming audio sources are planned and will be available in the future. Play-Fi is HiFi over WiFi from your Android Device (phone or tablet). Play-Fi enables you to stream your music from the Wren Play-Fi App on your phone or tablet to your wireless router, which delivers it to your Wren V5PF for crystal clear playback. The technology behind Play-Fi is complex, but it’s simple to use: Just download the free Wren Play-Fi App and follow the simple instructions to connect your Wren V5PF speaker(s) to your WiFi network. The Wren Play-Fi App organizes all the music you have stored on your device and enables you to manage your collection through an easy-to-use music player. Stream music from the music collection on your device — or from more than a thousand internet radio stations using V-Tuner, which is included in the app. You can also play Pandora and DLNA music from a compatible server. With the Wren V5PF and the Wren Play-Fi App, you can listen to music in any room in the house. 12 Enjoy! Sit back and enjoy the music. (And if you must check your email, feel free — the Wren Play-Fi App runs smoothly in the background.) Questions? Visit wrensound.com/support for additional help. 13 Troubleshooting Tips Problem Possible Solutions I am unable to connect the Wren V5PF to my network. 1. Verify that your WiFi network is functioning. Power Powers on and off the speaker. White light indicates power is on. Amber light indicates volume is muted. Volume Adjustment Indicator Indicates volume being adjusted. English Speaker Controls 2. The WiFi signal may be weak or the Wren V5PF may be out of range of your WiFi network. Move the Wren V5PF closer to your network access point. 3. Reset the Wren V5PF Hardware: • Unplug the power supply from the rear of the speaker. • Wait 15 seconds, then plug in power supply and turn on the speaker. Volume Up Increases the volume. 4. Verify that you have selected the WiFi source on the speaker before trying to set up your network connection. Volume Down Decreases the volume. Source Selector WiFi (Play-Fi) Indicator Indicates WiFi (Play-Fi) audio source is selected. Selects the desired audio input source. Aux (3.5mm) Source Indicator Indicates aux audio source is selected. The Wren Play-Fi App cannot find the Play-Fi devices. Verify that the following are true: 1. Play-Fi devices are fully powered on and in Discovery Mode. 2. You are within the recommended range of your router. 3. Your Android device has its WiFi enabled. 4. There are no other Android apps on your device that are currently running that are impeding WiFi connectivity. • If you still can’t find the Play-Fi device, and are in an office environment, verify with your network administrator that no special permissions are enabled that would prevent external wireless devices from broadcasting within the network. • If the speaker remains unfound, perform a factory reset on the offending unit, restart your Android device and re-download the Wren Play-Fi App. More Troubleshooting, Next Page * See the full user manual at wrensound.com/support for details. 14 15 Problem Possible Solutions The Wren Play-Fi App says “Play-Fi Devices Lost.” If you see this message, it could mean one or more things: Notes English Troubleshooting Tips (cont.) • The connection to your network is very weak • There is heavy network traffic. • You’ve moved out of your personal network’s coverage range. • You have lost your network connection. • You have connected to a network other than the one your Play-Fi device(s) are on. • Your Android device’s WiFi has been taken over by another app. • Your device lost power in the middle of communication. Make sure the following are true: • Verify that your network setting and that your devices are connected to the same network. • Ensure that your Android device has not left the range of your router. • Verify that your Android device is on the same network as your speakers. Finally, exit and then restart the Wren Play-Fi App. It should now find all of your devices. If you are still unable to find the Play-Fi device(s), reset the speaker by unplugging and plugging it back in. 16 17 18 19 Contact Information Wren Sound Systems | Customer Service/Technical Support Phone: 1-855-GET-WREN (438-9736) Email: support@wrensound.com Web: wrensound.com/support V5PF.SG.V1.R0.01.15.13.US 20
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Annotate, Fill forms, Extract XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2013:01:15 17:44:20-05:00 Metadata Date : 2013:01:30 20:07:51+08:00 Modify Date : 2013:01:30 20:07:51+08:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:e4db8e0b-68f2-403c-986a-d087fe767fd0 Original Document ID : xmp.did:7F482D96662068118083B5D7BDD841A0 Document ID : xmp.id:6C011ED0182068118083E130421377CA Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:67011ED0182068118083E130421377CA Derived From Document ID : xmp.did:67011ED0182068118083E130421377CA Derived From Original Document ID: xmp.did:7F482D96662068118083B5D7BDD841A0 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2013:01:15 17:44:20-05:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 11 Creator : Adobe InDesign CS6 (Macintosh)EXIF Metadata provided by EXIF.tools