Netgear orporated 11400182 Universal WiFi Range Extender User Manual Universal WiFi Range Extender WN3000RP
Netgear Incorporated Universal WiFi Range Extender Universal WiFi Range Extender WN3000RP
User Manual
![](/img.php?id=1667171&img=bg1.png)
350 East Plumeria Drive
San Jose, CA 95134
USA
March 2012
202-10990-01
v1.0
Universal WiFi Range
Extender WN1000RP
User Manual
![](/img.php?id=1667171&img=bg2.png)
2
Universal WiFi Range Extender WN1000RP
©2012 NETGEAR, Inc. All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form or by any means without the written permission of NETGEAR, Inc.
Technical Support
Thank you for choosing NETGEAR. To register your product, get the latest product updates, get support online, or
for more information about the topics covered in this manual, visit the Support website at
http://support.netgear.com.
Phone (US & Canada only): 1-888-NETGEAR
Phone (Other Countries): Check the list of phone numbers at
http://support.netgear.com/app/answers/detail/a_id/984
Trademarks
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change
without notice. Other brand and product names are registered trademarks or trademarks of their respective
holders. © 2012 NETGEAR, Inc. All rights reserved.
Statement of Conditions
To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes
to the products described in this document without notice. NETGEAR does not assume any liability that may occur
due to the use, or application of, the product(s) or circuit layout(s) described herein.
![](/img.php?id=1667171&img=bg3.png)
3
Table of Contents
Chapter 1 Getting Started
Hardware Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
How the Extender Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
When to Use Your Extender. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Positioning Your Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Log In to the Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Use the Smart Wizard to Set Up the Extender. . . . . . . . . . . . . . . . . . . . . . .9
Chapter 2 Extender Network Settings
Connect the Extender to an Existing Network . . . . . . . . . . . . . . . . . . . . . .12
Use WPS to Add a PC to the Extender’s Wireless Network. . . . . . . . . . . .12
Extender Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Set Up WEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Set Up WPA, WPA2, or WPA + WPA2. . . . . . . . . . . . . . . . . . . . . . . . . . 16
Extender IP Address Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Status Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Show Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Attached Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Back Up and Manage Extender Settings . . . . . . . . . . . . . . . . . . . . . . . . . .19
Back Up Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Restore Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Erase the Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Set the Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Advanced Wireless Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Chapter 3 Troubleshooting
Smart Wizard FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Connecting to http://www.mywifiext.net . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Joining Wireless Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Appendix A Supplemental Information
Factory Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Appendix B Compliance Notification
![](/img.php?id=1667171&img=bg4.png)
4
1
1. Getting Started
This chapter covers the following topics:
• Hardware Features
• How the Extender Works
• Log In to the Extender
• Log In to the Extender
• Use the Smart Wizard to Set Up the Extender
For more information about the topics covered in this manual, visit the Support website at
http://support.netgear.com.
![](/img.php?id=1667171&img=bg5.png)
Getting Started
5
Universal WiFi Range Extender WN1000RP
Hardware Features
Factory Reset button
WPS button
On/Off button
PC to Extender
Status
Link Rate
Figure 1. Extender
The LEDs on the front show how the Extender is working:
• Link Rate. This LED indicates a wireless connection between the Extender and the
router.
-Green is best.
-Amber is good.
-Red is poor.
• Status. This LED is lit when the Extender is powered on.
• PC to Extender. The LED is lit when the Extender is connected to a PC.
The side panel has the following features:
• On/Off button. Turns the device on and off.
• WPS button. Press the WPS button to wirelessly connect the Extender to your
router or wireless adapter.
The bottom of the Extender has the following feature:
• Factory Reset button. To use this button, stick a paper clip into the reset hole and hold it
until the Status LED flashes.
![](/img.php?id=1667171&img=bg6.png)
Getting Started
6
Universal WiFi Range Extender WN1000RP
How the Extender Works
The Extender works like a bridge between a wireless router and a computer or wireless
device outside the wireless router’s range. To do this, the Extender has two main jobs:
1. The Extender connects to a wireless network that is up and running.
When the Extender connects wirelessly to a network, it acts as a network client. This is
similar to how a computer connects to a network.
2. The Extender acts as an access point for computers.
The Extender has its own wireless network called NETGEAR_EXT that wireless
computers can join. In its role as an access point, the Extender performs tasks that
wireless routers do, such as broadcasting its network name (SSID).
The Extender must do each of these jobs so that both ends of the bridge are in place.
Figure 2. Range Extender in a home
When to Use Your Extender
NETGEAR recommends that you connect to the Extender only when your home network
connection is poor. Because data traffic routed through the Extender is inherently slower than
traffic routed directly from the network, the computer should stay on the network if the
connection is good enough. NETGEAR recommends that you connect through the Extender
network only when the computer is in a “dead zone” where connection from the network is
very poor or non-existent.
![](/img.php?id=1667171&img=bg7.png)
Getting Started
7
Universal WiFi Range Extender WN1000RP
The Extender LEDs can help you tell if the extender is correctly set up and working as it
should.
• The best performance is delivered when both the Link Rate LED and the PC to Extender
Connection LED are green.
• A workable performance is delivered when the Link Rate LED is amber and the PC to
Extender Connection LED is green.
Positioning Your Extender
The ideal location to place the Extender is half-way between your wireless router and your
computer.
DO DON’T
Figure 3. Range extender location
The best connection is established when there is a clear line of sight between the Extender
and the wireless router and also a clear line of sight between the Extender and the computer
you are using. If this straight path is blocked by a thick wall or other materials, move the
Extender to a different location half-way between the computer and the router.
If there is no power outlet nearby, or you prefer to place the Extender elsewhere, move the
Extender closer to the computer. If the Link Rate LED is green or amber and the PC to
Extender Connection LED is green, the Extender is working as expected.
To improve the Link Rate LED from red or amber to green:
• Once you successfully connect to the Extender from a computer that is outside the range
of your router and log in to www.mywifiext.net, the Smart Wizard guides you through the
process to connect the Extender to a router.
• If the Link Rate LED is red or the Smart Wizard cannot connect the Extender to a router,
move the Extender closer to the router or to a different spot where it provides a better line
of sight. As you move the Extender, continue to check the Link Rate and the PC to
Extender Connection LEDs on the front panel until you find a location where the Link
Rate LED is green or amber, and the PC to Extender Connection LED is green. Note that
you might have to unplug the Extender as you move it to a different location. If you do,
from the new location, power up the Extender and continue to check the LEDs.
Once the LEDs show that the Extender is in a good location, open a browser and go to
http://www.mywifiext.net to continue the setup process.
![](/img.php?id=1667171&img=bg8.png)
Getting Started
8
Universal WiFi Range Extender WN1000RP
Log In to the Extender
You can log in to the Extender to use the Smart Wizard or to use the menu selections to view
or change the extender’s settings.
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter http://www.mywifiext.net. You are prompted to
enter a user name and password:
If you do not see the log in prompt, make sure to include http:// when you type
http://www.mywifiext.net in your browser.
3. Type admin for the user name. The default password is password. NETGEAR
recommends that you set a more secure password after you log in (see Set the Password
on page 21).
• If your Extender has an Internet connection, the Firmware Upgrade screen displays
(see Upgrade the Firmware on page 22), and the software automatically checks for
new firmware at the NETGEAR website.
• The Status screen displays with the menu on the left. This screen shows what the
current settings are for the Extender:
Menu Status screen
![](/img.php?id=1667171&img=bg9.png)
Getting Started
9
Universal WiFi Range Extender WN1000RP
Use the Smart Wizard to Set Up the Extender
The Smart Wizard can help you set up your Extender to connect to a wireless network. For
information about more configuration options, see Chapter 2, Extender Network Settings.
The Universal WiFi Range Extender WN1000RP Installation Guide (included in the package)
explains how to install your Extender. During installation, when you launch your Internet
browser, the Smart Wizard automatically displays.
After installation, to use the Smart Wizard again:
1. Log in to the Extender as described previously.
Note: Once you begin using the Smart Wizard, you must complete all of its
steps before you can exit.
2. From the menu, select Setup Wizard. The following screen displays:
This is the same Smart Wizard that displays during installation as described in the
installation guide.
![](/img.php?id=1667171&img=bga.png)
Getting Started
10
Universal WiFi Range Extender WN1000RP
3. Either select a network from the list, or select the Manually input my wireless SSID radio
button and type the SSID.
4. Enter the passphrase for your wireless network and click Continue. The next screen
displays:
5. Make sure that the correct network name is shown, and then click Continue.
The Extender connects to your existing wireless network.
![](/img.php?id=1667171&img=bgb.png)
Getting Started
11
Universal WiFi Range Extender WN1000RP
The Extender’s wireless network name (SSID) changes to the name of your wireless
network name with _EXT added to the end. The following screen displays:
When this happens, your computer is automatically disconnected from the Extender
wireless network.
6. If you want to use the same password to access the Extender’s wireless network that you
use for wireless access to your existing network, click the copy password button.
7. With the software that you use to manage your wireless connections, join the Extender
wireless network. For instance, if you use Windows, you might use a screen like this:
8. Then go back to the Extender wizard screen and select the check box to confirm that you
have connected to the Extender network:
9. Click Continue.
![](/img.php?id=1667171&img=bgc.png)
12
2
2. Extender Network Settings
To change settings, connect the Extender to your computer and use your Internet browser to go
to http://www.mywifiext.net as described in Log In to the Extender on page 8.
• Connect the Extender to an Existing Network
• Use WPS to Add a PC to the Extender’s Wireless Network
• Extender Wireless Settings
• Extender IP Address Setup
• Status Screen
• Attached Devices
• Back Up and Manage Extender Settings
• Set the Password
• Upgrade the Firmware
• Advanced Wireless Settings
![](/img.php?id=1667171&img=bgd.png)
Extender Network Settings
13
Universal WiFi Range Extender WN1000RP
Connect the Extender to an Existing Network
You can use this menu selection to wirelessly connect the Extender to your home network.
1. From the Extender menu at http://www.mywifiext.net, select Setup > Connect to an
Existing Network. The Extender scans for wireless networks, and displays a list.
If your wireless network is not on the list, and it is up and running, see Positioning Your
Extender on page 7 for suggestions.
2. Click the radio button to select your
network from the list and click Continue.
The next screen displays:
3. Enter your network’s passphrase or key
and click Continue.
The Extender joins your wireless
network.
Use WPS to Add a PC to the Extender’s Wireless Network
WPS (Wi-Fi Protected Setup) lets you connect a computer or wireless device to the
Extender’s network without entering the wireless network passphrase or key. Instead, you
use a WPS button or enter a PIN to connect. WPS supports WPA and WPA2 wireless
security. If your Extender network is open (no wireless security is set), then connecting with
WPS automatically sets WPA2 + WPA wireless security on the Extender network.
The Universal WiFi Range Extender WN1000RP Installation Guide explains how to use WPS
during installation.
You can connect with WPS by using either the WPS button on the side of the Extender, or by
logging in to the Extender and clicking an onscreen WPS button.
![](/img.php?id=1667171&img=bge.png)
Extender Network Settings
14
Universal WiFi Range Extender WN1000RP
To use the Extender WPS button to connect:
1. Locate the WPS button on the side of the Extender.
WPS button
2. Press the Extender’s WPS button.
For 2 minutes, the Extender attempts to add a wireless client (a computer or other
wireless device) to its wireless network.
3. Within 2 minutes, press the WPS button on your wireless device, or follow the WPS
instructions that came with your wireless device.
Your wireless device is now connected to the Extender.
To log in to the Extender and use WPS to connect:
1. From the Extender menu at http://www.mywifiext.net, select Setup > Add WPS Client.
The following screen displays:
2. Select a radio button.
• Push Button (recommended). Either click the button or press the WPS
button on the front of the Extender.
• PIN Number. Select the PIN number radio button and enter the client PIN in the field
that displays.
The Extender tries to find the wireless client (the computer) that is attempting to join the
network. If you are using a WPS button, it tries for 2 minutes. If you are using a PIN, it
tries for 4 minutes.
3. Go to your wireless computer. Use its WPS software to try to connect to the Extender.
![](/img.php?id=1667171&img=bgf.png)
Extender Network Settings
15
Universal WiFi Range Extender WN1000RP
The first time you add a WPS client, WPS automatically sets the Extender’s wireless
security to WPA2 + WPA with a random passphrase. You can view these settings in the
Wireless Settings screen, described in the following section.
Extender Wireless Settings
You can use the Wireless Settings screen to change the network name (SSID) for the
Extender’s network and to set up wireless security. If you do not change these settings, the
network name is NETGEAR_EXT, and the network is open (no wireless security is set up).
Note: If you use a wireless computer to change the extender’s wireless
settings, you will be disconnected when you click Apply. To
reconnect, you must select the new network name that you created,
and enter the passphrase or wireless security key that you set up.
To change the wireless settings for the extender’s network:
1. From the Extender menu at http://www.mywifiext.net, select Setup > Wireless Settings
to display the following screen:
2. In the Name (SSID) field, you can type in a new name to customize your extender network.
3. In the Security Options section of the screen, select the type of wireless security that you
want to use on your network.
• None. This is an open wireless network. Any wireless computer or device is allowed
to join this network.
• WEP. WEP is an older standard, and is less secure than WPA or WPA2. WEP uses
encryption keys and data encryption for data security. You can select 64-bit or 128-bit
encryption.
![](/img.php?id=1667171&img=bg10.png)
Extender Network Settings
16
Universal WiFi Range Extender WN1000RP
• WPA-PSK [TKIP]. WPA is more secure than WEP. When using wireless computers or
devices that support WPA, you can enter a passphrase to join the extender’s wireless
network.
• WPA2-PSK [AES]. WPA2 is even more secure, but some older computers do not
support this standard. When using wireless computers or devices that support WPA2,
you can enter the passphrase to join the extender’s wireless network.
• WPA-PSK [TKIP] + WPA2-PASK [AES]. When using wireless computers or devices
that support either WPA or WPA2, you can enter the passphrase to join the extender’s
wireless network.
4. Click Apply to save your settings.
5. Use your wireless computer to connect to the Extender’s network with its new settings. The
Smart Wizard can guide you through this process.
Set Up WEP
1. In the Wireless Settings screen, in the Security Options section, select the WEP radio
button.
2. Select the authentication type: Automatic, Open System, or Shared Key. The default is
Open System.
Note: The authentication is separate from the data encryption. You can
select authentication that requires a shared key, but still leaves data
transmissions unencrypted. Security is stronger if you use both the
Shared Key and WEP encryption settings.
3. Select the encryption strength setting:
• WEP 64-bit encryption. Enter 10 hexadecimal digits (any combination of 0–9, a–f,
or A–F).
• WEP 128-bit encryption. Enter 26 hexadecimal digits (any combination of 0–9, a–f,
or A–F).
4. Enter the encryption keys. You can manually or automatically program the four data
encryption keys. These values must be identical on all computers and access points in your
network:
• Passphrase. To use a passphrase to generate the keys, enter a passphrase, and
click Generate. This automatically creates the keys. Wireless computers must use
the passphrase or keys to access the Extender.
Note: Not all wireless computers support passphrase key generation. If
your computer does not support the passphrase, then you will need
to type the encryption key in order to join the wireless network.
![](/img.php?id=1667171&img=bg11.png)
Extender Network Settings
17
Universal WiFi Range Extender WN1000RP
• Key 1–Key 4. These values are not case-sensitive. You can manually enter the four
data encryption keys. These values must be identical on all computers and access
points in your network. Enter 10 hexadecimal digits (any combination of 0–9, a–f, or
A–F).
5. Select which of the four keys will be the default.
Data transmissions are always encrypted using the default key. The other keys can be
used only to decrypt received data. The four entries are disabled if WPA-PSK or WPA
authentication is selected.
6. Click Apply to save your settings.
Set Up WPA, WPA2, or WPA + WPA2
Both WPA and WPA2 provide strong data security. WPA with TKIP can be used on Windows
systems with Service Pack 2 or later. WPA2 with AES is a hardware implementation; see
your device documentation before implementing it.
To set up WPA or WPA2 in the Extender:
1. On the Wireless Setting screen, select the radio button for the WPA or WPA2 option of
your choice.
2. The settings displayed on the screen depend on which security option you select.
3. For WPA-PSK or WPA2-PSK, enter the passphrase.
4. Click Apply to save your settings.
Extender IP Address Setup
From the Extender menu at http://www.mywifiext.net, under the Maintenance heading, select
IP Address.
The IP Address screen shows whether the Extender is set to get its IP address dynamically
from the router (this is the most common setting), or is set as a static IP address.
• Get Dynamically From Router. The wireless network router assigns an IP address when
the Extender connects to its wireless network. Most networks are set up so that the router
automatically does this.
• Use Static IP Address. Specify a static IP address. This is not usually necessary. If you
set this up, you should be technically experienced or have a technically experienced
person help you.
-IP Address. The static IP address.
-IP Subnet Mask. The subnet mask associated with the IP address.
-Gateway IP Address. The IP address for the gateway.
-Primary DNS. The primary domain name server (DNS).
-Secondary DNS. The secondary domain name server (DNS).
![](/img.php?id=1667171&img=bg12.png)
Extender Network Settings
18
Universal WiFi Range Extender WN1000RP
Status Screen
When you connect to http://www.mywifiext.net, after the automatic firmware check, the Status
screen displays. You can also select Status from the menu to display this screen:
This screen shows the current settings and the status of your Extender.
You can click Show Statistics to see device performance statistics such as the number of
packets sent and number of packets received for each port. See Show Statistics on page 19.
Hardware and Firmware Version. The model of the hardware and the currently running
firmware version.
GUI Language Version. The currently selected language.
Connection Status to Existing Network
• Name (SSID). Your Extender is set up to connect to this SSID, also called the wireless
name.
• Connection Status. The status of your wireless connection (connected or disconnected).
• Link Rate. The actual transmission (Tx) and receive (Rx) link rate in the current wireless
connection.
Extender IP Info
• MAC Address. The physical address of the Extender, as seen from the local area
network (LAN).
• IP Address. The IP address of the Extender. The default is 192.168.1.250.
• DHCP Client. Identifies the network DHCP client on the wireless network.
![](/img.php?id=1667171&img=bg13.png)
Extender Network Settings
19
Universal WiFi Range Extender WN1000RP
• IP Subnet Mask. The IP subnet mask associated with the LAN IP address of the
Extender. The default is 255.255.255.0.
• Gateway IP Address. he IP address of the wireless network gateway.
• Domain Name Server. The IP address of the Domain Name Server (DNS) of the
wireless network.
Extender Wireless Settings
• Name (SSID). the name (SSID) of the wireless network.
• Region. The country where the Extender is set up for use.
• Channel. The current channel, which determines the operating frequency.
• Wireless AP. Indicates if the access point (AP) feature is enabled.
• Broadcast Name. Indicates if the Extender is configured to broadcast its SSID.
• Wi-Fi Protected Setup. This indicates whether Wi-Fi Protected Setup is configured.
Show Statistics
On the Device Status screen, click Show Statistics to display the following screen:
Table 1. Show Statistics Fields
Field Description
LAN or WLAN (Port) The statistics for the LAN (local), and wireless LAN (WLAN) ports. For each
port, the screen displays the following:
Status The link status of the port.
TxPkts The number of packets transmitted on this port since reset or manual clear.
RxPkts The number of packets received on this port since reset or manual clear.
Collisions The number of collisions on this port since reset or manual clear.
Tx B/s The current line utilization—percentage of current bandwidth used on this
port.
Rx B/s The average line utilization for this port.
![](/img.php?id=1667171&img=bg14.png)
Extender Network Settings
20
Universal WiFi Range Extender WN1000RP
Attached Devices
From the Extender menu at http://www.mywifiext.net, under the Maintenance heading, select
Network Devices to display the following screen:
Back Up and Manage Extender Settings
From the Extender menu at http://www.mywifiext.net, under the Maintenance heading, select
Backup Settings to display this screen.
The Backup and Restore options in the Backup Settings screen let you save and retrieve a
file containing your Extender’s configuration settings. Once you have your Extender working
correctly, you should back up the information to have it available if something goes wrong.
When you back up the settings, they are saved as a file on your computer. You can restore
the device’s settings from this file.
Up Time The time elapsed since the last power cycle or reset.
Poll Interval Specify the poll interval frequency. If you change this value, click Set
Interval so that your change takes effect.
Table 1. Show Statistics Fields (Continued)
Field Description
![](/img.php?id=1667171&img=bg15.png)
Extender Network Settings
21
Universal WiFi Range Extender WN1000RP
Back Up Settings
1. Click Backup. Your browser extracts the configuration file from the Extender.
2. If you do not have your browser set up to save downloaded files automatically, locate where
you want to save the file.
3. You can give the file a meaningful name at this time, such as internet_adapter.cfg.
Restore Settings
1. On the Backup Settings screen, click Browse.
2. Locate and select the previously saved backup file.
3. Click Restore.
A screen displays letting you know that the device has been successfully restored to the
previous settings. The Extender restarts. This takes about 1 minute.
CAUTION:
Do not try to go online, turn off the Extender, shut down the computer, or
do anything else to the Extender until it finishes restarting!
4. Close the message window.
To restore your settings from a saved configuration file, enter the full path to the file on your
computer, or click Browse to browse to the file. When you have located it, click Restore to
send the file to the Extender. The Extender then reboots automatically.
Erase the Settings
Under some circumstances (for example, if you have lost track of the changes that you made
to the Extender settings), you might want to erase the configuration. After an erase, the
Extender returns to its factory settings (see Factory Settings on page 26).
To erase the configuration, click the Erase button in the Backup Settings screen.
CAUTION:
Do not try to go online, turn off the Extender, shut down the computer, or
do anything else to the Extender until it finishes restarting!
Set the Password
The user name to access the Extender is admin, and its default password is password.
NETGEAR strongly recommends that you set a more secure password.
![](/img.php?id=1667171&img=bg16.png)
Extender Network Settings
22
Universal WiFi Range Extender WN1000RP
From the Extender menu at http://www.mywifiext.net, select Maintenance > Set Password.
The following screen displays:
Type the old password, type the new password twice, and then click Apply.
Upgrade the Firmware
Unless you changed the settings in the Firmware Upgrade screen previously, the Extender is
set up to check for new firmware automatically at log in.
If you do not want to use the automatic firmware check, clear the Check for New Version
Upon Login check box.
To check for firmware and upgrade if it is available:
1. From the Extender menu at http://www.mywifiext.net, under the Maintenance heading,
select Firmware Upgrade. The following screen displays:
2. Click Check to see if new firmware is available. If it is, follow the onscreen prompts to
download it onto your computer.
3. Use the Browse field to locate and select the new firmware.
4. Click Upload to install the new firmware on your Extender.
CAUTION:
Once you start the firmware upgrade, do not try to go online, turn off the
Extender, shut down the computer, or do anything else to the Extender
until it finishes restarting.
![](/img.php?id=1667171&img=bg17.png)
Extender Network Settings
23
Universal WiFi Range Extender WN1000RP
Advanced Wireless Settings
The Extender is already set up with the optimum settings. Do not alter these settings unless
directed by NETGEAR support. Incorrect settings might disable the Extender unexpectedly.
To view or change the advanced wireless settings:
From the Extender menu at http://www.mywifiext.net, under the Advanced heading, select
Wireless Settings. The following screen displays:
You can view or configure the following settings:
• Enable Wireless Access Point. Enable the extender to work as a wireless access point.
If this check box is cleared, then computers or wireless devices cannot connect wirelessly
to the extender.
• Enable SSID Broadcast. Enable the extender to broadcast its wireless network name
(SSID). If this check box is cleared, then the wireless network is hidden. To join a hidden
wireless network, you have to type the wireless name.
• Disable Device’s PIN. Selecting this check box disables the extender’s PIN. The PIN
can be used for a WPS wireless connection.
• Keep Existing Wireless Settings. When this check box is selected, the settings in the
Wireless Settings screen stay the same when WPS is used for a wireless connection.
• Setup Access List. Specify a list of computers or wireless devices that are allowed to
connect to the network. If you use an access list, then computers that are not on the list
are not allowed to join the wireless network.
![](/img.php?id=1667171&img=bg18.png)
24
3
3. Troubleshooting
Smart Wizard FAQs
1. When I connect to the network, Smart Wizard keeps asking me for my passphrase, and
I am sure I’ve entered the correct passphrase. What can I do?
It is very likely that the Extender is placed at the borderline of the range covered by the
router. See Positioning Your Extender on page 7.
2. I got an error message in the Review Settings screen in the Smart Wizard. What should I
do?
Make sure that your computer is connected to the Extender by using the SSID and the
passphrase that you have just set up, and clicking the Refresh button in your browser.
This will return you to the Smart Wizard.
3. I connected to NETGEAR_EXT and launched a browser, but why can’t I see the Smart
Wizard?
• Make sure that your computer is set up to use DHCP. If you set up your computer to
use a static IP address, you have to change the settings back so that it uses Dynamic
Host Configuration Protocol (DHCP).
• Make sure the PC to Extender Connection LED is green.
• Relaunch the browser and enter www.mywifiext.net.
• Check to make sure that your computer has an IP address in the IP Address screen
(see Extender IP Address Setup on page 17).
Connecting to http://www.mywifiext.net
If you have trouble connecting, try to locate the source of the problem:
• For help with passwords, see Log In to the Extender on page 8.
• If your browser displays an error page, make sure that you include http:// when you type
this URL in the address field of your Internet browser. If you leave it out, you might not be
able to connect.
• The Extender LEDs can help you tell if the extender is correctly set up and working as it
should.
![](/img.php?id=1667171&img=bg19.png)
Troubleshooting
25
Universal WiFi Range Extender WN1000RP
-The best performance is delivered when both the Link Rate LED and the PC to
Extender Connection LED are green.
-A workable performance is delivered when the Link Rate LED is amber and the
PC to Extender Connection LED is green.
Joining Wireless Networks
To join a wireless network you must know its network name (also called the SSID) so that you
can select it. If the network is secure, you must know the passphrase or wireless key. If the
Extender does not connect to the network that you chose, the following message displays:
Connection was not established to the selected network.
If this happens it could be due to one of these reasons:
• The network name, passphrase, or key might have been typed incorrectly. Click Cancel,
use the Smart Wizard to select the network from the list, and retype the passphrase or
key. This is case-sensitive. PASSWORD25 is not the same as Password25 or
password25. See Use the Smart Wizard to Set Up the Extender on page 9.
• If the Smart Wizard does not find your wireless network (it is not displayed in the Select
Existing Network screen), check to see if your wireless network is still up and running.
Make sure that the router is turned on. If possible, move the Extender closer to the router
and click Try Again.
• If the Extender WLAN LED is red, this indicates a poor wireless connection. The best
connection is established when there is a clear line of sight between the Extender and the
router you are connecting to. Make sure that there are no physical obstacles between the
Extender and the router, and try to move the Extender closer to the router.
If you use the Smart Wizard, and the Extender cannot connect to the router or cannot get an
IP address from the router, it displays the following message:
You are not able to connect to the Internet. Click Continue to run through set up again to
connect to your network.
If you click Continue, the Smart Wizard starts again (see Use the Smart Wizard to Set Up the
Extender on page 9). If you click Exit, the Status screen displays with menu selections on the
left (see Log In to the Extender on page 8).
![](/img.php?id=1667171&img=bg1a.png)
26
A
A. Supplemental Information
Factory Settings
You can press and hold the Factory Settings button on the side panel for 7 seconds. The
Extender resets, and returns to its factory settings.
Table 2.
Factory Settings
Smart Wizard Enabled
Wireless Wireless communication Enabled
Wireless Network Name (SSID) NETGEAR_EXT
Security Disabled
Transmission speed Auto1
1. Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate.
Country/Region United States (varies by region)
Operating mode 802.11n, 802.11g, 802.11b
Data rate Up to 300 Mbps
![](/img.php?id=1667171&img=bg1b.png)
Supplemental Information
27
Universal WiFi Range Extender WN1000RP
Technical Specifications
Table 3.
Technical Specifications
Network protocol and
standards compatibility
Data and Routing Protocols: TCP/IP, DHCP server and client
AC input 100-240V~, 0.3A (Max)
Physical specifications • Dimensions: 112 x 74 x 45 mm (4.41 x 2.91 x 1.77 in)
• Weight: 0.245 kg (0.54 lb)
Environmental • Operating temperature: 32° to 140° F (0° to 40° C)
• Operating humidity: 90% maximum relative humidity, non condensing
• Electromagnetic emissions: Meets requirements of: FCC Part 15 Class B.
Interface • Local: 10BASE-T, 100BASE-Tx, RJ-45
• 802.11n/g/b
![](/img.php?id=1667171&img=bg1c.png)
28
B
B. Compliance Notification
Regulatory Compliance Information
This section includes user requirements for operating this product in accordance with National laws for usage of radio
spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may
result in unlawful operation and adverse action against the end-user by the applicable National regulatory authority.
Note: This product’s firmware limits operation to only the channels allowed in a particular Region or Country.
Therefore, all options described in this user's guide may not be available in your version of the product.
FCC Requirements for Operation in the United States
FCC Information to User
This product does not contain any user serviceable components and is to be used with approved antennas only.
Any product changes or modifications will invalidate all applicable regulatory certifications and approvals
FCC Guidelines for Human Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Declaration of Conformity
We, NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole responsibility that the
Universal WiFi Range Extender WN1000RP complies with Part 15 Subpart B of FCC CFR47 Rules. Operation is
subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
FCC Radio Frequency Interference Warnings & Instructions
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following methods:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an electrical outlet on a circuit different from that to which the radio receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
![](/img.php?id=1667171&img=bg1d.png)
Compliance Notification
29
Universal WiFi Range Extender WN1000RP
FCC Caution
• Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
• This transmitter must not be co-located or operation in conjunction with any other antenna or transmitter.
Note: The country code selection is for non-US models only and is not available to all US models. Per FCC
regulation, all Wi-Fi products marketed in the US must be fixed to US operation channels only.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Industry Canada Statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio exempts de licence.
Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage
préjudiciable, et (2) ce dispositif doit accepter tour brouillage reçu, y compris un brouillage susceptible de provoquer
un fonctionnement indésirable.
Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Declaration d’exposition aux radiations: Cet equipement est conforme aux limites d’exposition aux rayonnements
IC etablies pour un environnement non controle. Cet equipement doit etre installe et utilise avec un minimum de 20 cm
de distance entre la source de rayonnement et votre corps.
Europe – EU Declaration of Conformity
Marking with the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the
European Union (1999/5/EC).
This equipment meets the following conformance standards:
• EN300 328 (2.4Ghz), EN301 489-17, EN60950-1
• This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and
EFTA countries, except in France and Italy where restrictive use applies.
• In Italy, the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to
use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or
network services.
• This device may not be used for setting up outdoor radio links in France, and in some areas the RF output power
may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For detailed information contact the
national spectrum authority in France.
![](/img.php?id=1667171&img=bg1e.png)
Compliance Notification
30
Universal WiFi Range Extender WN1000RP
For complete DoC, visit the NETGEAR EU Declarations of Conformity website at::
http://kb.netgear.com/app/answers/detail/a_id/11621/
Table 4. EDOC in Languages of the European Community
Language Statement
Cesky [Czech] NETGEAR Inc. tímto prohlašuje, že tento Radiolan je ve shode se
základními požadavky a dalšími príslušnými ustanoveními smernice
1999/5/ES.
Dansk [Danish] Undertegnede NETGEAR Inc. erklærer herved, at følgende udstyr
Radiolan overholder de væsentlige krav og øvrige relevante krav i
direktiv 1999/5/EF.
Deutsch [German] Hiermit erklärt NETGEAR Inc., dass sich das Gerät Radiolan in
Übereinstimmung mit den grundlegenden Anforderungen und den
übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG
befindet.
Eesti [Estonian] Käesolevaga kinnitab NETGEAR Inc. seadme Radiolan vastavust
direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele
teistele asjakohastele sätetele.
English Hereby, NETGEAR Inc., declares that this Radiolan is in compliance
with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Español [Spanish] Por medio de la presente NETGEAR Inc. declara que el Radiolan cumple con los
requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la
Directiva 1999/5/CE.
Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ NETGEAR Inc. ΔΗΛΩΝΕΙ ΟΤΙ Radiolan ΣΥΜΜΟΡΦΩΝΕΤΑΙ
ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ
ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français [French] Par la présente NETGEAR Inc. déclare que l'appareil Radiolan est
conforme aux exigences essentielles et aux autres dispositions
pertinentes de la directive 1999/5/CE.
Italiano [Italian] Con la presente NETGEAR Inc. dichiara che questo Radiolan è
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 1999/5/CE.
Latviski [Latvian] Ar šo NETGEAR Inc. deklarē, ka Radiolan atbilst Direktīvas
1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem
noteikumiem.
Lietuvių [Lithuanian] Šiuo NETGEAR Inc. deklaruoja, kad šis Radiolan atitinka esminius
reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Nederlands [Dutch] Hierbij verklaart NETGEAR Inc. dat het toestel Radiolan in
overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
![](/img.php?id=1667171&img=bg1f.png)
Compliance Notification
31
Universal WiFi Range Extender WN1000RP
Interference Reduction Table
The table below shows the recommended minimum distance between NETGEAR equipment and household
appliances to reduce interference (in feet and meters).
Malti [Maltese] Hawnhekk, NETGEAR Inc., jiddikjara li dan Radiolan jikkonforma
mal-htigijiet essenzjali u ma provvedimenti ohrajn relevanti li hemm
fid-Dirrettiva 1999/5/EC.
Magyar [Hungarian Alulírott, NETGEAR Inc. nyilatkozom, hogy a Radiolan megfelel a
vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv
egyéb elõírásainak.
Polski [Polish] Niniejszym NETGEAR Inc. oświadcza, że Radiolan jest zgodny z
zasadniczymi wymogami oraz pozostałymi stosownymi
postanowieniami Dyrektywy 1999/5/EC.
Português [Portuguese] NETGEAR Inc. declara que este Radiolan está conforme com os
requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko [Slovenian] NETGEAR Inc. izjavlja, da je ta Radiolan v skladu z bistvenimi
zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
Slovensky [Slovak] NETGEAR Inc. týmto vyhlasuje, že Radiolan spĺňa základné
požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
Suomi [Finnish] NETGEAR Inc. vakuuttaa täten että Radiolan tyyppinen laite on
direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien
direktiivin muiden ehtojen mukainen.
Svenska [Swedish] Härmed intygar NETGEAR Inc. att denna Radiolan står I
överensstämmelse med de väsentliga egenskapskrav och övriga
relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Íslenska [Icelandic] Hér með lýsir NETGEAR Inc. yfir því að Radiolan er í samræmi við
grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.
Norsk [Norwegian] NETGEAR Inc. erklærer herved at utstyret Radiolan er i samsvar med
de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.
Table 5. Interference Reduction Table
Household Appliance Recommended Minimum Distance
(in feet and meters)
Microwave ovens 30 feet / 9 meters
Baby Monitor - Analog 20 feet / 6 meters
Baby Monitor - Digital 40 feet / 12 meters
Cordless phone - Analog 20 feet / 6 meters
Cordless phone - Digital 30 feet / 9 meters
Table 4. EDOC in Languages of the European Community
Language Statement
![](/img.php?id=1667171&img=bg20.png)
Compliance Notification
32
Universal WiFi Range Extender WN1000RP
Bluetooth devices 20 feet / 6 meters
ZigBee 20 feet / 6 meters
Table 5. Interference Reduction Table
Household Appliance Recommended Minimum Distance
(in feet and meters)