Nutek ATRRA Vehicle Security and Remote Start System User Manual 4280760 Phase 2 VSS RMST Owners Guide indd
Nutek Corporation Vehicle Security and Remote Start System 4280760 Phase 2 VSS RMST Owners Guide indd
Nutek >
User Manual
![](/img.php?id=3400320&img=bg1.png)
Owner’s Manual
Vehicle Security and Remote Start Systems
Vehicle Security and Remote Start System
4280760
Rev P1 03/17
4280760 Phase 2 VSS_RMST Owners Guide.indd 14280760 Phase 2 VSS_RMST Owners Guide.indd 1 3/22/2017 4:52:27 PM3/22/2017 4:52:27 PM
![](/img.php?id=3400320&img=bg2.png)
2
Contents
Welcome ............................................................................................3
Remote Control Operation (optional vehicle security system) ....4
Your Original-Equipment RKE Keyfob ................................................4
Arming the Security System ................................................................4
Disarming the Security System ...........................................................4
System Operation (optional vehicle security system) ..................5
When the Security System is Armed ...................................................5
Security LED Indicator (optional) ........................................................5
Shock Sensor (optional) .......................................................................5
Starter Interrupt (optional) ....................................................................5
Shock Sensor Disable...........................................................................6
Intrusion Attempt Alert .........................................................................6
Disarming the System if Your RKE Keyfob is Lost or Inoperative ..6
Using the Remote Start Feature (optional) ....................................7
Starting / Stopping Your Vehicle (1-Way Transmitter) .......................7
Starting / Stopping Your Vehicle (2-Way Transmitter) .......................8
Starting / Stopping Your Vehicle (Factory RKE Transmitter) ............9
Entering the Vehicle While it is Running via Remote Start .............10
Pre-Heating or Pre-Cooling the Interior of the Vehicle ....................10
Car Find / Panic Mode (If Equipped) ..................................................10
Safety Features ...............................................................................10
Remote Start Safety Features ............................................................10
Power Window / Moon Roof Disable .................................................10
Automatic Door Locking .....................................................................10
System Maintenance ......................................................................11
Changing the Remote Control Transmitter Battery ......................... 11
Adding Remote Control Transmitters to Your System ....................11
Deleting Lost or Stolen Remote Control Transmitters from
Your System ......................................................................................... 11
User Selectable Options ................................................................12
Optional Activation Method (1-Way & 2-Way Transmitters) ............12
Additional User Notes ....................................................................12
Extending Run Time ............................................................................12
Why Your Vehicle May Not Start Via Remote ....................................12
Warranty Information .....................................................................13
4280760 Phase 2 VSS_RMST Owners Guide.indd 24280760 Phase 2 VSS_RMST Owners Guide.indd 2 3/22/2017 4:52:30 PM3/22/2017 4:52:30 PM
![](/img.php?id=3400320&img=bg3.png)
3
Welcome
Congratulations on your purchase of a Ford Motor Company vehicle
security and/or remote start system. This technology represents the
latest in automotive convenience and protection systems. Your system,
purchased today, is ready to accept tomorrows advancements in
technology.
The Ford Motor Company vehicle security and remote start system is a
scalable product that can be confi gured based on personal preference
and vehicle model. All features contained in this manual may not have
been installed at time of purchase. Please consult your Ford dealer to
determine which features have been confi gured on your vehicle and
how to expand the functionality of your chosen system.
4280760 Phase 2 VSS_RMST Owners Guide.indd 34280760 Phase 2 VSS_RMST Owners Guide.indd 3 3/22/2017 4:52:30 PM3/22/2017 4:52:30 PM
![](/img.php?id=3400320&img=bg4.png)
4
Remote Control Operation (optional vehicle security system)
Arming the Security System:
The Vehicle Security System may be armed using any of the methods below.
1. By pressing the (Lock Button) on the factory RKE keyfob.
2. Pressing the lock area on the door handle (intelligent access equipped vehicles
only).
3. By entering the “Lock” code into the keypad located on the outside of the driver’s
door (if equipped).
The front and rear lights will fl ash and the security LED (optional) will illuminate for
10 - 20 seconds, after which the security system will arm. The security LED will begin
to “blink” and all closed entry points will be protected.
If an entry point is left open, the security system will continue to ignore that entry point
until it is closed.
Disarming the Security System:
The Vehicle Security System will be disarmed if any of the following actions are taken.
1. Pressing the (Unlock Button) on the factory RKE keyfob.
2. Touching the inside of the exterior door handle (intelligent access equipped
vehicles only).
3. Entering the “Unlock” code into the keypad located on the outside of the driver’s
door (if equipped).
4. Turning the ignition “On” (must have a valid key read if equipped).
If there were no vehicle intrusion attempts while the security system was armed,
the security LED (optional) will turn off when the security system is disarmed. If
any vehicle intrusion attempts were made while the security system was armed, the
vehicle’s horn will honk and the exterior lights will fl ash two (2) times and the security
LED (optional) will fl ash a fast on/off sequence indicating an intrusion attempt.
Your Original-Equipment RKE Keyfob:
Your factory supplied Remote Keyless Entry (RKE) keyfob controls the arming and
disarming functions of your vehicle security system. The system is armed when the
doors are locked with the RKE keyfob. The system is disarmed when the doors are
unlocked with the RKE keyfob.
4280760 Phase 2 VSS_RMST Owners Guide.indd 44280760 Phase 2 VSS_RMST Owners Guide.indd 4 3/22/2017 4:52:30 PM3/22/2017 4:52:30 PM
![](/img.php?id=3400320&img=bg5.png)
5
System Operation (optional vehicle security system)
When the Security System is Armed:
•All interior entry points are monitored for unauthorized entry (Note: depending
on trim level, the vehicle’s hood may not be monitored);
•The shock sensor (optional) monitors for impact to the vehicle’s body or glass;
•The security LED indicator (optional) fl ashes once every few seconds.
If any monitored entry point is opened or hard impact is detected, the system will
activate an alarm cycle. During the alarm cycle:
•The horn sounds an on / off pattern;
•The front and rear lights fl ash;
•The security LED indicator (optional) begins to fl ash rapidly.
The alarm cycle (horn honks) lasts for 30 seconds (the front and rear lights may
continue to fl ash longer). At the end of the alarm cycle, the system will pause for 10
seconds and then begin monitoring for any further alarm conditions. If another alarm
condition is detected the system will go in to another alarm cycle.
Security LED Indicator (optional):
The optional security LED indicator is a high-intensity red light mounted in a visible
location on the vehicle dashboard. This red light gives a visual indication of the alarm
system’s state of operation. Note the chart below:
If the Security LED is… …then the Security System is
Off Disarmed
Flashing slowly Fully Armed
Flashing quickly Triggered in your absence
On (not fl ashing) In Standby
Shock Sensor (optional):
While the security system is armed, the optional shock sensor monitors for impact
to both the vehicle’s body and glass. If a light, not-threatening, impact is detected
the system will honk the horn and fl ash the exterior lights one (1) time to warn-away
would be intruders. In the event that a hard impact is detected, the system will trip an
alarm cycle. Increasing or decreasing sensitivity should be completed by a service
professional. If adjustment is necessary, please contact your local dealer.
Starter Interrupt (optional):
Starter Interrupt is an optional feature that can be installed on certain model vehicles.
If equipped, the starter is disabled any time the system is armed and starting of the
vehicle with an invalid ignition key is attempted.
4280760 Phase 2 VSS_RMST Owners Guide.indd 54280760 Phase 2 VSS_RMST Owners Guide.indd 5 3/22/2017 4:52:31 PM3/22/2017 4:52:31 PM
![](/img.php?id=3400320&img=bg6.png)
6
System Operation, con’t (optional vehicle security system)
Shock Sensor Disable:
The security system has the ability to ignore the optional shock sensor while armed.
This feature is useful for events that may jar your vehicle, but pose no threat, such as
a loud thunder storm or heavy construction traffi c passing near your parked vehicle.
This feature may be activated using the procedure listed below. The vehicle’s doors
can be opened or closed during this process.
To Disable the Shock Sensor:
1. Turn the ignition key off and remove key.
2. Within 15 seconds, open the driver’s door.
3. Within 15 seconds, press the (Unlock Button) on your RKE Keyfob 3 times.
4. Within 5 seconds press the (Lock Button) on your RKE Keyfob 1 time.
The horn will honk two (2) times and the security LED (optional) will illuminate for 20
seconds, after which the security system will arm with the shock sensor disabled. The
shock sensor will remain disabled until the vehicle ignition is cycled ON then OFF.
Intrusion Attempt Alert:
If the horn honks two (2) times when you disarm your security system, this indicates
that the alarm was tripped while you were away from your vehicle. You will also notice
that the dash mounted security LED indicator (optional) is also fl ashing rapidly.
Turning the ignition to the ON position or rearming the security system will clear the
intrusion attempt alert.
Disarming the System if Your RKE Keyfob is Lost or Inoperative:
If your RKE keyfob fails to operate, the system can be disarmed using a valid ignition
key or intelligent access keyfob (if equipped):
1. Enter the vehicle (the alarm may sound when the door is opened).
2. Insert the ignition key and turn to the ON position. For intelligent access equipped
vehicles, press the start button.
3. The system will disarm when the ignition is powered and the vehicle recognizes
the valid transponder key.
4280760 Phase 2 VSS_RMST Owners Guide.indd 64280760 Phase 2 VSS_RMST Owners Guide.indd 6 3/22/2017 4:52:31 PM3/22/2017 4:52:31 PM
![](/img.php?id=3400320&img=bg7.png)
7
Stopping Your Vehicle with the 1-Way Transmitter:
Press and hold** the button to turn off the vehicle.
Starting Your Vehicle with the 1-Way Transmitter:
The remote control start function is activated by pressing the button two times*
within 3 seconds on the 1-way remote control transmitter. The system will check
the vehicle to ensure that it is safe to start, and if all safety parameters are correct,
the engine will start within 5 seconds (diesel engines may take longer, to allow the
glowplugs suffi cient time in all conditions to heat up).
Note: See the vehicle owner’s manual for further details on remote start
operation.
Using the Remote Start Feature (optional)
1-Way Transmitter
Press two times to
activate Remote Start.
Press and hold** to
manually shut down the
Remote Start.
Press to initiate
Car Find. Press and
hold** to initiate Panic
2-Way Transmitter
* May be activated by a “Press & Hold”, refer to “User Selectable Options” in this manual.
** “Press & Hold” or “Pressing and Holding” refers to pushing the transmitter button for more
than 2.5 seconds.
4280760 Phase 2 VSS_RMST Owners Guide.indd 74280760 Phase 2 VSS_RMST Owners Guide.indd 7 3/22/2017 4:52:31 PM3/22/2017 4:52:31 PM
![](/img.php?id=3400320&img=bg8.png)
8
Starting Your Vehicle with the 2-Way:
The remote control start function is activated by pressing the button two times
within 3 seconds on either the 2-way remote control transmitter. If you are within the
operating range of the system, your transmitter will respond with one single beep and
one fl ash of the blue LED behind the button. This response indicates that the
signal to start was received by the system. Once the vehicle starts (1-3 seconds later),
your 2-way transmitter will respond with 2 beeps and 2 fl ashes of the blue LED. While
remote started, the blue LED will continue to fl ash every few seconds indicating the
vehicle is still running via remote start.
Note: See the vehicle’s owner manual for further remote start run time details.
Stopping Your Vehicle:
Press and hold** the button to turn off the vehicle. When the remote start is shut
down by any means (run time has expired, by remote control, gear shifter actuated,
hood opened), and you are within the operating range of the system, your 2-way
transmitter will respond with 3 beeps and 3 fl ashes of the blue LED, indicating the
remote start system has turned off. If you are out of the system operating range at
the time of remote start shutdown, your 2-way transmitter may keep fl ashing the blue
LED up to 15 minutes after the remote start was initiated or until vehicle is started by
ignition key.
Vehicle has shut down, either by pressing and holding** the button
or completing the run cycle (Transmitter must be in range of the vehicle).
3 Beeps/LED Flashes
Vehicle has started.
Vehicle has received an Initiate Start Command.
Remote Start Status
Transmitter Indicators
1 Beep/LED Flash
2 Beeps/LED Flashes
Steady LED Flash Vehicle is running.
or
Safety input triggered:
- Hood opened or gear selector moved while running in remote start
mode.
or
- Key turned in the ignition on a remote started vehicle.
or
Transmitter is out of range of the vehicle while trying to remote start or the
vehicle did not receive the command to remote start.
Using the Remote Start Feature, con’t (optional)
* May be activated by a “Press & Hold”, refer to “User Selectable Options” in this manual.
** “Press & Hold” or “Pressing and Holding” refers to pushing the transmitter button for more
than 2.5 seconds.
4280760 Phase 2 VSS_RMST Owners Guide.indd 84280760 Phase 2 VSS_RMST Owners Guide.indd 8 3/22/2017 4:52:31 PM3/22/2017 4:52:31 PM
![](/img.php?id=3400320&img=bg9.png)
9
Press then press
then press . to
shutdown Remote Start
Press then press
then press . to activate
Remote Start
Stopping Your Vehicle with the Factory Remote Keyless Entry (RKE)
Transmitter:
Pressing the button then within 2 seconds, pressing the button, then within 2
seconds pressing the button on the vehicle remote keyless entry transmitter will
cause the vehicle to shut down within 10 seconds.
Starting Your Vehicle with the factory Remote Keyless Entry (RKE)
Transmitter (ROG Start):
The remote control start function is activated by pressing the button then within
2 seconds, pressing the button, then within 2 seconds pressing the button
on the vehicle remote keyless entry transmitter. The vehicle will ensure that it is safe
to start, and if all safety parameters are correct, the engine will start within 5 seconds
(diesel engines may take longer, to allow the glowplugs suffi cient time in all conditions
to heat up).
Note: See the vehicle owner’s manual for further details on remote start
operation.
Using the Remote Start Feature, con’t (optional)
Remote Keyless Entry Transmitter
Transmitter image for reference only. Actual transmitter design may vary.
Using the ROG Start Feature (optional)
4280760 Phase 2 VSS_RMST Owners Guide.indd 94280760 Phase 2 VSS_RMST Owners Guide.indd 9 3/22/2017 4:52:31 PM3/22/2017 4:52:31 PM
![](/img.php?id=3400320&img=bga.png)
10
Entering the Vehicle While it is Running via Remote Start:
1. Enter the vehicle with the Integrated Keyhead transmitter.
2. Insert the key into the ignition and turn to the ON position.
3. Once a programmed vehicle key has been recognized, the remote start session
will stop, the 2-way transmitter (if equipped) will beep 3 times, and the vehicle will
operate normally.
Pre-Heating or Pre-Cooling the Interior of the Vehicle:
Most vehicles will automatically heat/cool the vehicle without presetting the HVAC
controls (See the vehicle owner’s manual for further details).
Car Find / Panic Mode (2-Button Transmitter Only):
Press the button to activate the Car Find feature. The horn will honk and parking
lights will fl ash 6 times to assist you in fi nding your vehicle. Press and hold** the
button to activate the Panic feature (only available on certain model vehicles). The
horn will sound and the parking lights will fl ash for 30 seconds or until you press or
press and hold** the button again.
Safety Features
Remote Start Prevention and Shut down:
For safety and security reasons, the system will prevent remote start activation or shut
down the engine during remote start operation if any of the following occur:
• The hood is opened
• Gear selector is moved***
As a safety precaution, the vehicle will shut off if left unattended for 15 minutes.
Default remote start runtime can be changed: Refer to Message Center in the
Instrument Cluster chapter of your vehicle’s owner manual for further details.
Power Window / Moonroof Disable (if factory equipped):
On certain model vehicles, each time the remote control start feature is activated,
all power windows and the moonroof will be disabled while the vehicle is running
via remote start. The windows and moonroof will resume normal operation after the
remote start is shut down, or the vehicle is being used with the vehicle key.
Automatic Door Locking:
Each time the remote control start feature is activated, the power door locks may be
activated prior to the vehicle starting. The doors can be unlocked at any time via the
vehicle key fob.
** “Press & Hold” or “Pressing and Holding” refers to pushing the transmitter button for more than
2.5 seconds.
*** On some vehicles.
Using the Remote Start Feature, con’t (optional)
4280760 Phase 2 VSS_RMST Owners Guide.indd 104280760 Phase 2 VSS_RMST Owners Guide.indd 10 3/22/2017 4:52:31 PM3/22/2017 4:52:31 PM
![](/img.php?id=3400320&img=bgb.png)
11
Changing the Remote Control Transmitter Battery:
The (CR-2032 for 1-way transmitter and CR2450for 2-way transmitter) 3-volt lithium
battery supplied in your remote control should last approximately one year, depending
on usage. When the battery begins to weaken, you will notice a decrease in remote
transmitter operational range (the distance from your vehicle). Follow the instructions
below to change the remote transmitter battery.
1. Remove the small phillips screw (2-way transmitter only).
2. Gently pry apart the top and bottom halves of the transmitter case using a small
fl at tool.
3. Remove the old battery and replace with a new one. Be sure to observe the (+)
sign on the battery and case.
4. Carefully snap the case halves back together. Reinstall phillips screw (2-way
transmitter only), then test the remote control.
It is not necessary to re-program the remote control after changing the
battery, however the fi rst activation after changing the battery may require
several button presses to allow the transmitter to “re-sync” to the system..
Adding Remote Control Transmitters to Your System:
The system has the ability to operate from up to 8 remote controls. Follow these
instructions to add a remote control to your system.
1. Open the driver’s door and enter the vehicle (shifter in park), leaving the driver’s
door open throughout the remainder of the process.
2. Press and hold the brake pedal.
3. Turn the vehicle ignition key from the OFF position to the ON position 6 times,
ending in the ON position (Off, On, Off, On, Off, On, Off, On, Off, On, Off, On).
Note, the brake pedal can be released after the fi rst Off to On cycle.
The horn will honk 3 times. This indicates that the unit has entered the remote
control programming mode.
4. Press & Hold** the button on the remote control to be programmed.
The horn will honk 1 time, indicating that the system has “learned” that remote
control.
5. Repeat step 4 for any additional remote controls.
6. Turn the vehicle ignition off to exit the programming mode. Test all remote controls
to ensure that they work properly.
Deleting Lost or Stolen Remote Control Transmitters from Your
System:
Lost or stolen remote control transmitters can be easily deleted by reprogramming all
eight transmitter code locations. Follow the steps above and program any combination
of transmitters a total of eight times.
Remote Start System Maintenance
** “Press & Hold” or “Pressing and Holding” refers to pushing the transmitter button for more than
2.5 seconds.
4280760 Phase 2 VSS_RMST Owners Guide.indd 114280760 Phase 2 VSS_RMST Owners Guide.indd 11 3/22/2017 4:52:31 PM3/22/2017 4:52:31 PM
![](/img.php?id=3400320&img=bgc.png)
12
User Selectable Remote Start Options
The Remote Start System comes pre-programmed to start the vehicle when the
button on the remote control transmitter is pressed 2 times. The Remote Start System
may be programmed to activate by pressing and holding** the button on the
remote control transmitter for more than 2.5 seconds by following these instructions.
1. Open the driver’s door and enter the vehicle, close driver’s door.
2. Ensure vehicle is in Park and the brake pedal is not depressed.
3. Turn the vehicle ignition to the ON position.
4. Press the button on the remote control transmitter 3 times within 5 seconds
(Pausing for 1 second between each button press).
The horn will honk 1 time and the 2-way transmitter (if equipped) will beep 1 time,
indicating that the remote start system will now start with a “Press and hold”.
5. Turn the vehicle ignition to the OFF position to exit the programming mode.
6. Repeat steps 1 - 5 to return the vehicle to the factory setting.
• 1 Honk = Press and Hold to start
• 2 Honks = Double Press to start
Optional Activation Method (1-Way & 2-Way Transmitters):
** “Press & Hold” or “Pressing and Holding” refers to pushing the transmitter button for more than
2.5 seconds.
Why Your Vehicle May Not Start Via Remote:
• The no-start condition may not be related to the remote start function. Verify that
the vehicle starts with the ignition key or via push-button start (if equipped).
• The vehicle has already been started via the remote 2 times or a total of 30
minutes (On some models).
For enviromental purposes, the vehicle can only be remote started twice in 1
hour. This restriction will be reset by waiting 1 hour, or by turning the vehicle
ignition to ON.
• The hood is ajar.
• The battery in the remote start transmitter needs replacing.
• The remote start feature has been disabled in the instrument cluster menu.
• Low vehicle battery.
• An instrument cluster maintenance indicator light is illuminated.
Extending Run Time:
The run time of the Remote Start System can be doubled while the vehicle is running
via remote start (adding another 5/10/15 minutes, depending on the vehicle settings)
by pressing the button on the remote control transmitter 2 times.
Additional User Notes
4280760 Phase 2 VSS_RMST Owners Guide.indd 124280760 Phase 2 VSS_RMST Owners Guide.indd 12 3/22/2017 4:52:32 PM3/22/2017 4:52:32 PM
![](/img.php?id=3400320&img=bgd.png)
13
FORD VEHICLE REMOTE START SYSTEMS LIMITED WARRANTY
BASIC COVERAGE
Ford Motor Company will repair or replace any properly installed Ford Vehicle Security/Remote Start/Keyless
Entry System found defective in factory-supplied material or workmanship during the warranty period, as well as
any component damage by the defective accessory. The accessory will be warranted for whichever provides the
greater benefi t:
¤ 12 months or 12,000 miles (20,000 km) from your system purchase date/mileage (whichever occurs fi rst)
¤ the remainder of your new vehicle limited warranty
This means that a Ford Vehicle Remote Start System purchased along with your new vehicle are covered for up to
the length of the Ford or Lincoln new vehicle limited warranty.
CUSTOMER REQUIREMENTS
To receive warranty service, Purchaser must fulfi ll the following requirements:
1) Return the vehicle to the original selling dealer’s place of business during regular business hours for warranty
service.
2) Present the Dealer with the Purchaser’s copy of the original invoice showing date of purchase and installation if
applicable. If the Purchaser is traveling or has moved to a different location, any authorized Ford Motor Company
dealer will fulfi ll this warranty. EXCLUSIONS
THIS WARRANTY DOES NOT COVER PARTS THAT ARE DAMAGED BY MISUSE, NEGLECT, ALTERATION,
ABUSE, ACCIDENT, FIRE, FLOOD, LIGHTNING, IT DOES NOT COVER PARTS THAT HAVE BEEN
IMPROPERLY SERVICED OR USED IN APPLICATIONS FOR WHICH THEY WERE NOT DESIGNED OR
APPROVED BY FORD MOTOR COMPANY; IT DOES NOT COVER FAILURES CAUSED BY NON-FORD PARTS.
This warranty gives you specifi c legal rights and you may also have other rights that may vary from state to state
or province to province. Ford Motor Company does not authorize any person to create for it any other obligation
or liability in connection with the Ford Vehicle Security/Keyless Entry Systems. TO THE EXTENT ALLOWED BY
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS
LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. NEITHER FORD MOTOR COMPANY NOR THE
SELLING DEALER SHALL BE RESPONSIBLE FOR LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS,
OR CONSEQUENTIAL DAMAGES. Some states or provinces do not allow limitations on how long an implied
warranty will last or the exclusion or limitation of incidental or consequential damages so the above limitation may
not apply to you.
FCC COMPLIANCE
This device complies with Part 15 of the FCC rules and with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including any interference that may cause
undesired operation.
Note: Changes or modifi cations not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment and void warranty.
To comply with RF exposure limits for general population/uncontrolled exposure, the antenna(e)
used for this transmitter must be installed to provide a separation distance of at least 20 cm from
all persons and must not be collocated or operated in conjunction with any other antenna or
transmitter.
This radio transmitter has been approved by Industry Canada to operate with the antenna listed
below. Antenna types not included below or having a gain greater than that indicated below are
strictly prohibited for use with this device.
Notice:
Do not remote start vehicle in an enclosed environment (i.e. closed garage). Prolonged operation
of a motor vehicle in an enclosed environment can cause a harmful build-up of Carbon Monoxide.
Carbon Monoxide is harmful to your health. Exposure to high levels of carbon monoxide can cause
headaches, dizziness or in extreme cases unconsciousness and/or death.
4280760 Phase 2 VSS_RMST Owners Guide.indd 134280760 Phase 2 VSS_RMST Owners Guide.indd 13 3/22/2017 4:52:32 PM3/22/2017 4:52:32 PM
Approved External Antenna: Omni-directional, 2.5 dBi gain, 902-928 MHz, antenna impedance is
50 ohms.