Nutek MTBB Remote Control Transmitter User Manual Manual
Nutek Corporation Remote Control Transmitter Manual
Nutek >
User Manual
![](/img.php?id=238374&img=bg1.png)
CA-RC5HFS
User’s Manual
![](/img.php?id=238374&img=bg2.png)
![](/img.php?id=238374&img=bg3.png)
![](/img.php?id=238374&img=bg4.png)
The NUTEK CORPORATION Model: CARC5HF (referred to as the EUT in this report) is a
Transmitter of car alarm security system. It offers wireless remote control, ideal for use in
vehicle security system to activate the function of center door lock control system and car
searching except the alarm system.
A major technical descriptions of EUT is described as following:
A). Fundamental Frequency: 433.92 MHz
B). Modulation : Pulse Modulation
C). Antenna Designation: Non-User Replaceable (Fixed)
D). Power Supply: 12V, Battery Operated
E). Receiver type : Superheterodyne
Fundamental Frequency 433.92MHz
Power Source 12V Battery
Transmitting Time Periodic ≤ 5 seconds
Associated Receiver FCC DOC
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
condition.(1).this device may not cause harmful interference. (2).this device must accept any
interference received, including interference that may cause undesired operation
Warning:
Note: This equipment has been tested and found to comply with the limits for digital device, pursuant
to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, used and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference in to radiate communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
l Reorient or relocate the receiving antenna
l Increase the separation between the equipment and receiver.
l Connect the equipment into an outlet on a circuit different form that to which the receiver in
connected.
l Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference: and
(2) This device must accept any interference received: including interference that may cause
undesired operation.
THE MANUFACTURER IS NOT RESPONSIBKE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH
ODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modification to this equipment. Such modification could void the user’s authority to operate the equipment.