Precyse Technologies SA91004135 915 Smart Tags SA91/004135, SA91/004035, SA91/004132, SA91/004032 User Manual 915 Smart Tag
Precyse Technologies Inc 915 Smart Tags SA91/004135, SA91/004035, SA91/004132, SA91/004032 915 Smart Tag
WONSA91004135 user manual rev2
Precyse Technologies Inc Ha'amal 11 Haamal 11 Rosh Haayin Rosh Ha'ayin, 48092 Israel Document No.:20131030-1 Revision: 1.0 915 Smart Tag FCC ID:WONSA91004135 User Manual Release Date: 3/00/01/03 Prepared by: Yossi Nurok Distribution (Check all appropriate): [ ] Precyse Only [ ] Project Team Only [ ] Customer and Supplier Precyse Technologies, Inc. Date: 30 October 2013 Page 1 of 12 Precyse Technologies Inc Ha'amal 11 Haamal 11 Rosh Haayin Rosh Ha'ayin, 48092 Israel Revision Record Rev. 1.0 Effective Date 30/10/13 Description 915 Smart Tag user manual initial release Reference documents Doc # Description Precyse Technologies, Ltd.. Date: 5 November 2013 Page 2 of 12 Precyse Technologies Inc Ha'amal 11 Haamal 11 Rosh Haayin Rosh Ha'ayin, 48092 Israel TABLE OF CONTENTS Section/Title Page Introduction ...................................................................................................... 4 Regulatory Information/disclaimers .................................................................. 4 Product description .......................................................................................... 7 915 Smart Tag (SA91/004135, SA91/004035, SA91/004032 and SA91/004132) ............................................................................................... 7 Technical Parameters ...................................................................................... 7 Models: ......................................................................................................... 7 Performance: ................................................................................................ 7 Communication: ............................................................................................ 7 Electrical: ...................................................................................................... 7 Environmental: .............................................................................................. 8 System test configuration ................................................................................. 8 SAT ............................................................................................................... 8 Tag wearing ..................................................................................................... 8 Theory of operation .......................................................................................... 8 Precyse Technologies, Ltd.. Date: 5 November 2013 Page 3 of 12 Precyse Technologies Inc Ha'amal 11 Haamal 11 Rosh Haayin Rosh Ha'ayin, 48092 Israel Introduction This document provides you with technical support information, and sources for additional product information. Regulatory Information/disclaimers Installation and use of this Wireless Radio device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The Manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, of the substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Instructions concerning human exposure to radio frequency electromagnetic fields: To comply with FCC Section 1.1307 (b) (1) for FCC RF exposure, implement the following instructions: 1. Badge Tag should operate in worst case condition with 0.5% duty cycle@17dBm peak power, meaning 17dBm-10*log(0.5/100)=-6dBm i.e. 0.25mW which is the source based time averaged maximum conducted power of channel, including tune-up tolerance. 2. Badge Tag should be worn on the waist belt with crocodile clip as shown in picture below. Trousers should be at least 1mm thick i.e. test separation distance is >1mm. 3. The highest operating frequency 917.14GHz i.e. √f(GHz)=0.958 4. SAR test exclusion is based on the following calculation according to the KDB procedure:[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] =[0.25/1]*0.958=0.25≤3.0 Precyse Technologies, Ltd.. Date: 5 November 2013 Page 4 of 12 Precyse Technologies Inc Ha'amal 11 Haamal 11 Rosh Haayin Rosh Ha'ayin, 48092 Israel This document is confidential and proprietary. No part of this document may be reproduced, stored, or transmitted in any form or by any means without prior written permission from Precyse technologies Inc. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation.” Precyse Technologies, Ltd.. Date: 5 November 2013 Page 5 of 12 Precyse Technologies Inc Ha'amal 11 Haamal 11 Rosh Haayin Rosh Ha'ayin, 48092 Israel The FCC Wants You to Know This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: a) Reorient or relocate the receiving antenna. b) Increase the separation between the equipment and receiver. c) Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. d) Consult the dealer or an experienced radio/TV technician. FCC Warning Modifications not expressly approved by the manufacturer could void the user authority to operate the equipment under FCC Rules. Precyse Technologies, Ltd.. Date: 5 November 2013 Page 6 of 12 Precyse Technologies Inc Ha'amal 11 Haamal 11 Rosh Haayin Rosh Ha'ayin, 48092 Israel Product description 915 Smart Tag (SA91/004135, SA91/004035, SA91/004032 and SA91/004132) FCC ID: WONSA91004135 The SA Tag is used to track assets in real time. It is based on an RF transceiver and a microcontroller. It uses the Precyse N3 proprietary protocol which provides a 2 way, half duplex communication with the base station. The unit is powered by a 3 AA battery. Technical Parameters Models: SA91/004135 SA91/004035 SA91/004032 SA91/004132 Performance: Read range: up to 1km. (Within line of sight) Write range: up to 1km. (Within line of sight) Read rate: 250Kbps. Write rate: 250Kbps. Communication: Frequency: 905-917.14MHz ISM within license free band Modulation: 2-FSK Channel bandwidth: 800KHz Number of channels: 16 ERP: Up to 17dBm, digitally controlled Communication protocol: N3. Transmission: Event base and on demand External interfaces: 1. 6 user buttons: 1-screen light, 2-find immediate location, 3-distress, 4-respond, 5-cancell message, 6-not used. The buttons are not used to increase transmission power in any way. 2. Buzzer 3. GPS receiver. Internal sensors: Motion, temperature sensors. Electrical: Power supply: 3.6Vdc Battery Pack Precyse Technologies, Ltd.. Date: 5 November 2013 Page 7 of 12 Precyse Technologies Inc Ha'amal 11 Haamal 11 Rosh Haayin Rosh Ha'ayin, 48092 Israel Precyse Technologies, Ltd.. Date: 5 November 2013 Page 8 of 12 Precyse Technologies Inc Ha'amal 11 Haamal 11 Rosh Haayin Rosh Ha'ayin, 48092 Israel Environmental: Size: 57mm (L) x 17mm (W) x 105mm (H) Operating temperature: -20°C to +75°C Humidity: 90% non-condensing Weight: 145gr. (5 ounces) System test configuration SAT The unit tested was configured with all hardware options present. Since the unit, under its normal operation, does not transmit data periodically, for emissions measurements, the SAT was programmed with special test software to transmit packets continuously at 17dBm output power, duty cycle (67.7%) with power amplifier enabled for FCC test requirement only. Normal operation duty cycle, assuming worst case, one event per second is less than 0.5% (5mSec transmit time per 1 second). Tag wearing SA91/004135 and SA91/004035 should be worn on the waist belt with crocodile clip as shown in picture below. Theory of operation The SAT method of communication is synchronized event based reporting, the SAT spends most of its time in low power sleep mode. Event could be GPS location, motion start and stop, PBC found and which one. When an event happens, the SAT sends a report to the base station. In order to avoid packet collisions and associated detection methods, the system uses a synchronous protocol, that is, An SAT can transmit data only after receiving a synchronization signal from the base station. SA91/004135 915 ExBadge Smart Agent Note1: for Hazardous locations. Note2: yellow enclosure see picture below. Precyse Technologies, Ltd.. Date: 5 November 2013 Page 9 of 12 Precyse Technologies Inc Ha'amal 11 Haamal 11 Rosh Haayin Rosh Ha'ayin, 48092 Israel SA91/004035 915 Badge Smart Agent Note3: same as SA91/004135 for non-hazardous locations. Note4: white enclosure – same dimensions as SA91/004135. SA91/004132 915 ExAsset Smart Agent Note5: for Hazardous locations. Note6: similar to SA91/004135 excluding display and human interface. picture below. See enclosure in SA91/004032 915 Asset Smart Agent Note7: Same as SA91/004132 for non-hazardous locations. Note8: Same enclosure as SA91/004132. Precyse Technologies, Ltd.. Date: 5 November 2013 Page 10 of 12 Precyse Technologies Inc Ha'amal 11 Haamal 11 Rosh Haayin Rosh Ha'ayin, 48092 Israel iLocate system block diagram PC Ethernet PBS PBC2 PBC1 TAG (SAT) Attached to assets PBC3 Precyse Technologies, Ltd.. Date: 5 November 2013 Page 11 of 12 Precyse Technologies Inc Ha'amal 11 Haamal 11 Rosh Haayin Rosh Ha'ayin, 48092 Israel Unit definitions: Base station, referred to as PBS: A radio device that transmits data to and from the tag (SAT) to a personal computer (PC), also provides synchronization signal. The unit is powered by a DC power supply. Beacon, referred to as PBC: A radio device that defines a location. Location detection can be realized through one or more PBCs. The unit is powered by a DC power supply. Tag (SAT): A radio device that is used to track and monitor assets. It communicates with the PBS and can detect the PBC signals. Precyse Technologies, Ltd.. Date: 5 November 2013 Page 12 of 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 12 Language : en-US Tagged PDF : Yes Title : 915 Smart Tag Author : Yossi Nurok Subject : User Manual Creator : Microsoft® Word 2010 Create Date : 2013:11:05 15:07:29+02:00 Modify Date : 2013:11:05 15:07:29+02:00 Producer : Microsoft® Word 2010EXIF Metadata provided by EXIF.tools