SOUNDMAX ELECTRONICS NA105 Car Audio System Player User Manual NA105C ENG ESP IM T140808
Soundmax Electronics Limited Car Audio System Player NA105C ENG ESP IM T140808
User Manual
NA105 Car Audio System Player INSTRUCTION MANUAL CD MP3 WMA USB AUX-IN BT 1A USB Universal Charge Safety WARNING Stop the car before operating the unit. Important to know... To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. Caution: Adjust the volume so that you can hear sounds outside the car. Driving with the volume too high may cause an accident. Condensation: When the car is air-conditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate. The illustrations in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the illustrations may differ from what appears on the actual equipment. If you experience problems during installation, consult your Nakamichi dealer. When you purchase external components, check with your Nakamichi dealer to make sure that they work with your model and in your area. Maintenance Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit. Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a cotton swab or cloth. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. EN 1 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. Preparation What’s in the box How to attach/detach the faceplate Check and identify the contents of your package: Attach Detach Main unit (with sleeve) Front panel Trim plate Do not expose the faceplate to direct sunlight, excessive heat, or humidity. Also avoid places with too much dust or the possibility of water splashing. Keep the faceplate in its casing while detached. The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers. Carrying case (for front panel) Remote control Disassembly tool (2pcs) Screw x 4pcs ISO male connector User manual How to reset your unit Reset If this unit fails to operate properly, press the reset button. The unit returns to factory settings when the reset button is pressed. 2 EN Installation / Connection Caution Basic Procedure If your car’s ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, as with battery wires, the battery may die. Install this unit in the console of your vehicle. Make sure the faceplate will not hit the lid of the console (if any) when closing and opening. After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. Mount the unit so that the mounting angle is 30° or less. If the fuse blows, first make sure the wires are not touching to cause a short circuit, then replace the old fuse with one that has the same rating. Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the wires or ground them to any metal part in the car. 1 Remove the key from the ignition switch, then disconnect the terminal of the car battery. 2 Make proper input and output wire connections. 3 Install the unit to your car. 4 Reconnect the terminal of the car battery. 5 Reset the unit. Warning The unit can only be installed in a car with a 12 V DC power supply, negative ground. If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. Disconnect the battery’s negative terminal and make all electrical connections before installing the unit. Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. Be sure to ground this unit to the car’s chassis again after installation. If the power is not turned ON, the speaker wire may have a short-circuit or touched the chassis of the vehicle and the protection function may have been activated. Therefore, the speaker wire should be checked. When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). Mounting and wiring this product requires skills and experience. For safety’s sake, leave this work to professionals. If you experience problems during installation, consult your Nakamichi dealer. Wiring Connection External Mic FM/AM Antenna Socket Rear RCA Output (Left) Rear RCA Output (Right) REAR Antenna Jack(not included) ISO Connector ISO Connector Wiring Chart Pin Color and function Pin B1/B2 Yellow Battery(+) A5 Blue Connect to system control terminal B3/B4 of the power AMP or auto antenna relaycontrol terminal(Max 150MA 12VDC) A7 A8 Red Black Ignition(ACC) Ground A4 EN 3 B5/B6 B7/B8 Color and function Grey + / Grey/Black Right rear speaker Right front speaker White + / White/Black Green + / Green/Black Left front speaker Left rear speaker Violet + / Violet/Black Installing the unit Bend the appropriate tabs to hold the sleeve firmly in place. Sleeve Trim plate Control panel Before attaching, make sure the direction of the escutcheon is correct. (Wider hooks on the bottom side.) 18 2m 53 mm Dashboard Screw ( not included in this packing ) Sleeve Trim plate Control panel Removing the unit 1 Detach the control panel. 2 Engage the catch pin on the removal tools into the holes on both sides of the escutcheon, then pull it out. 3 Insert the disassembly tools deeply into the slots on each side, then follow the arrows instructions as shown on the right. Disassembly Trim plate Sleeve Disassembly Control panel 4 EN Basic Operation Loading slot Encoder Volume Knob BAND Ejects the disc DBSS EQ XBASS SRC MENU Detaches the control panel Power / Mute Display window AUX IN Push open the cover USB terminal Aux-In jack When you press or hold the following button(s)... Main unit General operation Select the available sources (Radio, Disc, USB , Aux-In ), if the power is turned on. SRC Rotate it to increase or decrease the volume. Rotatory Volume knob Select items. ■ Turn mute or restore volume. ■ Turn the unit on. Press and hold again to turn the unit off. Power / Mute ■ Confirms selection. ■ Select the FM bands (FM1/ FM2/ FM3) or AM1 (MW1) / AM2 (MW2) ■ Under media playback to access into search mode. BAND ■ Press and hold to activate the Auto Store function. Pause/resume playback of a Disc, USB. ■ Under Radio mode to enter into the Auto Seek mode, press and hold to enter into the Manual Seek mode. ■ Under Media playback mode to skip track / file, press and hold to fast forward / backward. To access into the Audio Menu mode, press and hold to enter into the System Menu mode. MENU Press to turn On or Off dynamic bass boost sound. DBSS ■ To view the Clock. ■ Under Media playback mode to view play informations. ■ To adjust the EQ (Preset Equalizer) setting. EQ / XBASS ■ Turn On or Off the Xbass bosster function. ■ To answer / accept the call. ■ During the talking, press and hold to transfer the call. ■ To reject / end the call. ■ Returns to the previous item. EN 5 Function Settings 1 Press MENU to access into the [AUDIO MENU] mode, press and hold to enter into the [MENU] mode. 2 Press repeatedly to select the item to be adjusted. 3 Turn the encoder volume knob to select a value / option. [AUDIO MENU]... Item BASS ADJUST BASS LEVEL TREBLE ADJUST TREBLE LEVEL BALANCE FADER Selectable Setting Adjust the level -7 to +7. Adjust the level -7 to +7. Adjust the balance between the right and left speakers from 12R (full right) to 12L (full left). Adjust the fader between the front and rear speakers from 12R (full rear) to 12L (full front). [MENU]... Item CLOCK CLOCK SET CLOCK FORMAT Selectable Setting BEEP TONE Adjust the Hours and Minutes Select the time format 12H or 24H Turn On or Off this beep sound DIMMER Adjust the LCD display backlight level between Hight or Low 6 EN Listening to the Radio DBSS BAND EQ XBASS SRC MENU ■ ■ AUX IN Hold for about 2 seconds to memorize the current station . Press briefly to recall memorized station. 1 Press BAND repeatedly to a band ( FM1, FM2, FM3, AM1(MW1) or AM2 (Mw2)). 2 Press to search for a station. Adjust [MENU] mode settings While listening to the radio... 1 Press and hold 2 Press MENU to enter into the [MENU] mode. repeatedly to select the item to be adjusted. 3 Turn the encoder volume knob to select a value / option. Item AUTO STORE AREA LOCAL SEEK EN 7 Selectable Setting Press the to access into Auto Store mode, the six strongest stations of the selected band are saved in preset channel automatically: FM1, FM2, FM3(1-6), AM1, AM2. Select suitable country region of the radio: USA; LATIN; EUROPE; RUSSIA(Oirt); M-EAST; ASIA; JAPAN; AUST (Australia) To receive more radio stations or only stations with strong signal, you can adjust the radio sensitivity. Listening to a Disc/ USB device Detaches the control panel ■ ■ Press to select a track / file. Press and hold for fast forward / backward. ■ ■ Press to repeat one track, press again to repeat all tracks. Press and hold repeat a folder. Ejects the disc DBSS BAND EQ USB terminal XBASS SRC MENU AUX IN Press into search mode Press to pause. Press again to resume playback. Press to move next/previous folder. ■ Press to start random play, press again to cancel random play. ■ Press and hold random a folder. Playing a disc USB Smart Phone 1A charging Insert the disc into the Disc Slot with label side facing up, the 1 Slide the USB socket to left. unit will play starts automatically. 2 Insert the iPhone or Smart Phone device into the USB socket. 3 Once the iPhone or Smart Phone is connected and recognized, the iPhone/Smart Phone begins to charge. Playing a USB device 1 Slide the USB socket cover market to the left. 2 Insert the USB device into the USB socket. 3 Press the SRC to select USB mode.The unit starts playing from the USB device automatically. Listening to the other external components Auxiliary input jack BAND EQ XBASS SRC DBSS MENU 1 Press the SRC to select AUX-IN mode. 2 Turn on the external component and start playing. AUX IN 3.5 mm Cable (not included) 8 EN Operation of Bluetooth Hands-Free ■ ■ Press to answer / accept the call. Press and hold to transfer the call. DBSS BAND EQ XBASS SRC MENU Press to reject / end the call. AUX IN Press to change to "BT AUDIO" mode You can make or receive phone calls with Bluetooth-enabled To redial number phones through the unit. You can also listen to music from a 1 Press on front panel to redial. Bluetooth-enabled device. 2 The unit will display [CALLING], and the unit starts dialing the number dialed last time. Getting Started Before use the Bluetooth device, you need to pair the device to Remark: To make an outgoing call on this unit, the bluetooth the unit. Pairing needs only to be done once. connection between the unit and the phone must be active. Pairing the Bluetooth devices 1 Open your mobile phone and switch bluetooth on. Receiving a Call 2 Search for other bluetooth device with your device. 1 If there is incoming call, the phone number is displayed. if the incoming call has no phone number, [PHONE IN] is displayed. 3 Select “NAKAMICHI” in the pairing list. 4 Input the password “0000” 2 Press to answer / accept the call. 5 [Pairing OK] will be displayed on the panel if pairing is to terminate the call. successful, and the paired device will connect to the car audio 3 When conversation ends, press system automatically. Disconnect the bluetooth Call Transfer You can transfer voice from loudspeaker to mobile phones during 1 Press and hold MENU to enter into the [MENU] mode. call. 2 Once the [BT DISCONN] is displayed, press to activate During talking, press and hold voice transfers from the manual Disconnect mode. loudspeaker to mobile phone. Re-connect the bluetooth 1 Press and hold MENU to enter into the [MENU] mode. Bluetooth Audio Streaming A2DP 2 Once the [BT CONNECT] is displayed, press to activate If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on the manual Re-connect mode. the device through the unit. If the device also supports Audio Video Remote Control Profile (AVRCP) profile, you can use the control on the unit or its remote control to play music stored on Making a Call the device. You can dial number through the mobile phone. 1 Press SRC repeatedly to select [BT AUDIO]. 1 Use the Mobile Phone to dial and make an outgoing call. Press to start play, press it again to pause. 2 Once completed the dialing, [CALLING] is displayed. EN 9 3 To track up/down, press Remote Control Operation SRC AUDIO When you press or hold the following button(s)... Main unit General operation Turn mute or restore volume. Press turn the unit on or off. Press increas the volume. Press decreas the volume. ■ ■ SRC AUDIO Under Radio mode to enter into the Auto Seek mode, press and hold to enter into the Manual Seek mode. Under Media playback mode to skip track / file, press and hold to fast forward / backward. Selects the available sources (Radio, Disc, USB, BT AUDIO or Aux-In ), if the power is turned on. Press to access into the Audio Menu mode. 10 EN Product Information General Power Supply: 12V DC (10.5-14.4V), negative ground Fuse: 15A Suitable Speaker Impedance: 4 -8 Aux-In level: 500mV Audio Section Maximum Power Output: 50W x 4 Channels Continous Power Output: 20W x 4 RMS Pre-AMP Output Voltage: 1.5 V Bluetooth Output power: Class 2 Frequency band: 2.4000GHz-2.4835GHz ISM Band Range: 3 meters (free space) Standard: Bluetooth 2.0 specification About Audio file ■ ■ ■ ■ FM tuner section Frequency Range: 87.5 -107.9MHz (USA) 87.5 - 108MHz (ASIA) 87.5 - 108MHz (Europe) Usable Sensitivity: Better than 8dB at S/N 30dB AM tuner section Frequency Range: 530 - 1710KHz (USA) 522 - 1620KHz (ASIA) 522 - 1620KHz (Europe) Usable Sensitivity: Better than 40dB at S/N 20dB USB devices USB Flash Memory: USB 1.1 & 2.0 Compatible EN 11 ■ USB or memory file system: FAT16, FAT32 MP3/WMA bit rate: 32-320kbps and varible bit rate MP3 sampling frequencies: 8-48kHz WMA sampling frequencies: 32kHz, 44.1kHz, 48kHz ID3 tag v1.0 or later USB Smart Phone 1A charging Output Voltage : 5 V DC Output Current : 1000 mA (1A) www.nakamichicaraudio.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Warning : Invalid xref tableEXIF Metadata provided by EXIF.tools