ST Microelectronics S R L BCOIN01 Bluetooth Module User Manual STEVAL BCNKT01V1
ST Microelectronics S.R.L. Bluetooth Module STEVAL BCNKT01V1
Users manual
STEVAL-BCNKT01V1 BlueCoin Starter kit Data brief Features Contains FCC ID: S9NBCOIN01 Contains module IC 8976C-BCOIN01 certified with PMN: STEVAL-BCNKT01V1; HVIN: STEVAL-BCNCS01V1; HMN: STEVAL-BCNCR01V1; FVIN: bluenrg_7_2_c_Mode_2-32MHzXO32K_4M.img The development kit package includes: BlueCoin module (STEVALBCNCS01V1) with STM32F446, LSM6DSM, LSM303AGR, LPS22HB, 4x MP34DT04-C1, BlueNRG-MS, BALF-NRG-01D3, STBC03JR CoinStation (STEVAL-BCNST01V1) board equipped with 2 x VL53L0X timeof-flight, LDK120M LDO, audio DAC, 3.5 mm audio jack, USB connector, battery connector and SWD programming interface BlueCoin Cradle (STEVALBCNCR01V1) with SD memory card slot, USB port, ST1S12XX step down DC-DC converter and battery connector 130 mAh Li-Po battery Plastic box for housing the BlueCoin cradle and the battery SWD programming cable Software libraries and tools: June 2017 STSW-BCNKT01 BlueCoin firmware package with raw sensor data streaming support via USB, data logging on SDCard, audio acquisition and audio streaming, time-of-flight example and BLE protocol to interface to a Smartphone App. It includes low level drivers for all the on-board devices FP-AUD-SMARTMIC1: smart audio INOUT software expansion for STM32Cube FP-SNS-ALLMEMS1: STM32 ODE function pack for BLE and sensors FP-AUD-BVLINK1: BLE and microphones software expansion for STM32Cube ST BlueMS: iOS™ and Android™ demo apps BlueST-SDK: iOS and Android software development kit Compatible with STM32 ecosystem through STM32Cube support Description The STEVAL-BCNKT01V1 integrated development and prototyping platform for augmented acoustic and motion sensing for IoT applications builds on the listening and balancing capabilities of the human ear. With the expanded capabilities of its starter kit, BlueCoin lets you explore advanced sensor fusion and signal processing functions for robotics and automation applications with a 4 digital MEMS microphone array, a high-performance 9-axis inertial and environmental sensor unit and time-of-flight ranging sensors. A high-performance STM32F446 180 MHz MCU enables real-time implementation of the very advanced sensor fusion algorithms like adaptive beamforming and sound source localization, with ready-to-use, royalty-free building blocks. The BlueCoin can connect via the on-board BLE link to any IoT and smart industry wireless sensor network. DocID030519 Rev 1 For further information contact your local STMicroelectronics sales office 1/8 www.st.com Content of the starter kit STEVAL-BCNKT01V1 Content of the starter kit Figure 1: STEVAL-BCNCS01V1 - BlueCoin Core System STEVAL-BCNCS01V1 - BlueCoin Core System board features 2/8 Very compact module for motion, audio and environmental sensing and Bluetooth low energy connectivity with a complete set of firmware examples Main components: STM32F446 – 32-bit high-performance MCU (ARM® Cortex®-M4 with FPU) 4x MP34DT04-C1 – 64dB SNR Digital MEMS microphone LSM6DSM – iNEMO inertial module: 3D accelerometer and 3D gyroscope LSM303AGR – ultra-compact high-performance eCompass module: ultra-low power 3D accelerometer and 3D magnetometer LPS22HB – MEMS nano pressure sensor: 260-1260 hPa absolute digital output barometer BlueNRG-MS – Bluetooth low energy network processor BALF-NRG-01D3 – 50 Ω balun with integrated harmonic filter STBC03JR – linear battery charger with 150 mA LDO 3.0 V External interfaces: UART, SPI, SAI (Serial Audio Interface), I²C, USB OTG, ADC, GPIOs, SDIO, CAN, I2S SWD interface for debugging and programming capability The Bluetooth radio power output is set by default to 0 dBm; the FCC and IC certifications refer to this operating value. The power output can be changed up to 8 dBm by reprogramming the device firmware, but this change will require an update of the FCC and IC certifications, with additional radio emission tests to be performed. DocID030519 Rev 1 STEVAL-BCNKT01V1 Content of the starter kit Figure 2: STEVAL-BCNCR01V1 - BlueCoin Cradle board STEVAL-BCNCR01V1 - BlueCoin Cradle board features BlueCoin Cradle board with BlueCoin connectors ST1S12XX – 3.3 V step down DC-DC converter USBLC6-2P6 – very low capacitance ESD protection USB type A to Mini-B USB connector for power supply and communication microSD card socket Figure 3: STEVAL-BCNST01V1 - CoinStation board DocID030519 Rev 1 3/8 Content of the starter kit STEVAL-BCNST01V1 - CoinStation board features 4/8 STEVAL-BCNKT01V1 CoinStation expansion board with BlueCoin connectors LDK120M-R – 200 mA low quiescent current very low noise LDO USBLC6-2P6 – very low capacitance ESD protection for USB 2x VL53L0X Time-of-Flight (ToF) ranging sensor 16-Bit, low-power stereo audio DAC and 3.5 mm jack socket Micro-USB connector for power supply and communication Reset button SWD connector for programming and debugging DocID030519 Rev 1 STEVAL-BCNKT01V1 Product notice Product notice FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Innovation, Science and Economic Development Canada Compliance This device complies with Innovation, Science and Economic Development RSS standards. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Conformité à Innovation, Sciences et Développement Économique Canada Cet appareil est conforme aux normes RSS d'Innovation, Science et Développement économique. L'utilisation est soumise aux deux conditions suivantes: (1) cet appareil ne doit pas causer d'interférences nuisibles, et (2) cet appareil doit accepter de recevoir tous les types d’interférence, y comprises les interférences susceptibles d'entraîner un fonctionnement indésirable. Les changements ou les modifications non expressément approuvés par le fabricant pourraient annuler le permis d'utiliser l'équipement. DocID030519 Rev 1 5/8 Schematic diagrams STEVAL-BCNKT01V1 Schematic diagrams Figure 4: Functional block diagram STBC03J Batt charger With 3V LDO Integrated antenna Vsys 4x MP34DT04-C1 MEMS microphones VDD 3 V 2.048 MHz VBat BALF-NRG-01D3 Integrated balun PDM Vin (4.5 -5.5 V) 16MHz LSM6DSM acc+gyro STM32F446 LSM303AGR acc+mag I2C Cortex-M4F 180MHz 400 KHz BlueNRG-MS SP I 4-wire Bluetooth 4.1 5 MHz LPS22HB barometer 32MHz NRST SP I UART I2C SDIO SWD I2S USB PDM Figure 5: BlueCoin power supply STEVAL_BCNC S01V1 STBC03J VIN [4.5V-5.5V] 150 mA max LDO SYS Bat VDD [3 V] VSYS VIN or VBat VDD 3V Battery Connector VBat 6/8 DocID030519 Rev 1 STM32F4 Sensors BlueNRG-MS STEVAL-BCNKT01V1 Revision history Revision history Table 1: Document revision history Date Version 08-Jun-2017 Changes Initial release. DocID030519 Rev 1 7/8 STEVAL-BCNKT01V1 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2017 STMicroelectronics – All rights reserved 8/8 DocID030519 Rev 1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 8 Language : en-US Tagged PDF : Yes Title : STEVAL-BCNKT01V1 Author : Content Technologies Subject : revision 6 Creator : Microsoft® Word 2013 Create Date : 2017:06:08 16:03:55+02:00 Modify Date : 2017:06:08 16:03:55+02:00 Producer : Microsoft® Word 2013EXIF Metadata provided by EXIF.tools