Scosche BTMS Bluetooth Speaker (BTMS) User Manual BTMS CP0 spread indd
Scosche Industries Inc Bluetooth Speaker (BTMS) BTMS CP0 spread indd
Scosche >
User Manual
![](/img.php?id=3834558&img=bg1.png)
![](/img.php?id=3834558&img=bg2.png)
16.
18. PROTECTIVE FILM STICKER
19.
![](/img.php?id=3834558&img=bg3.png)
![](/img.php?id=3834558&img=bg4.png)
![](/img.php?id=3834558&img=bg5.png)
![](/img.php?id=3834558&img=bg6.png)
![](/img.php?id=3834558&img=bg7.png)
![](/img.php?id=3834558&img=bg8.png)
![](/img.php?id=3834558&img=bg9.png)
![](/img.php?id=3834558&img=bga.png)
![](/img.php?id=3834558&img=bgb.png)
16
19.
18.
![](/img.php?id=3834558&img=bgc.png)
![](/img.php?id=3834558&img=bgd.png)
![](/img.php?id=3834558&img=bge.png)
Pile:Li-ion 2000mAh
16
19.
18.
![](/img.php?id=3834558&img=bgf.png)
![](/img.php?id=3834558&img=bg10.png)
![](/img.php?id=3834558&img=bg11.png)
![](/img.php?id=3834558&img=bg12.png)
![](/img.php?id=3834558&img=bg13.png)
FCC Warning:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation. Any Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.
ISEDC Warning:
This device complies with Innovation, Science, and
Economic Development Canad licence-exempt RSS
standard(s). Operation is subject to the following two
conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'
Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
![](/img.php?id=3834558&img=bg14.png)
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment..
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
ISEDC Radiation Exposure Statement:
The device is compliance with RF exposure guidelines,
users can obtain Canadian information on RF
exposure and compliance. Le présent appareil est
conforme Après examen de ce matériel aux conformité
ou aux limites d’intensité de champ RF,les utilisateurs
peuvent sur l’exposition aux radiofréquences et la
conformité and compliance d’acquérirles informations
correspondantes.