Sivantos MIM001 In Ear hearing aid module User Manual Integration Manual
Sivantos GmbH In Ear hearing aid module Integration Manual
Sivantos >
Integration Manual
Integration manual for module “e2e 3.5” The “e2e 3.5” radio module contains a radio transceiver running at 3.28 MHz which is implemented in a single hardware platform. The radio consists of a nearfield inductive magnetic transceiver. It uses time division duplex and runs on a single channel with phase modulation. The signal is transmitted by a coil antenna. The intended use of this radio is to exchange data between two hearing aids or to communicate with a proprietary accessory. The main part of the module is a set of an analog and a digital ASIC which contain the radio. These ASICs are mounted on a flex PCB. In addition to that the module comprises the coil antenna for the nearfield inductive magnetic system and one crystals. On the flex PCB additional components are mounted and connected to the radio module. These include microphones, the connector to the external speaker, push buttons, the telecoil and the battery connector. The system is powered by a coin cell battery, all necessary voltage regulators are included in the module. The PCB with the module and all other components of the hearing aid are arranged in a plastic frame that is not user serviceable or user modifiable. The outer housing may be replaced by field service but this is not relevant for the wireless module. The module is thus not installed but instead assembled at the same time as the host is. The position of components and interconnection through the PCB are decided during the project phase for the different hosts and following the best practice of the engineering team in order to assure an optimal integration of the module. Several validation steps are done through the development to assure the full compliance with all the regulatory requirements. Sivantos GmbH - R&D PFD WS-L - Richard Rose Page 1 of 2 Erlangen, 2017-02-26 The user guide must contain the FCC ID Contains FCC ID: SGI-MIM001 and following statements: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ■ Reorient or relocate the receiving antenna. ■ Increase the separation between the equipment and receiver. ■ Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. ■ Consult the dealer or an experienced radio/TV technician for help. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with the legal manufacturer’s accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Sivantos GmbH - R&D PFD WS-L - Richard Rose Page 2 of 2 Erlangen, 2017-02-26
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Page Count : 2 Language : de-DE Tagged PDF : Yes XMP Toolkit : 3.1-701 Producer : Microsoft® Word 2016 Creator : schaulu5 Creator Tool : Microsoft® Word 2016 Create Date : 2018:02:26 02:31:09+01:00 Modify Date : 2018:02:26 02:31:09+01:00 Document ID : uuid:D8D59AE0-9EEA-48E0-83EA-03ABF2D7261F Instance ID : uuid:D8D59AE0-9EEA-48E0-83EA-03ABF2D7261F Author : schaulu5EXIF Metadata provided by EXIF.tools