Sonicwall 027 802.11b VPN Access point User Manual user1

Sonicwall, Inc. 802.11b VPN Access point user1

Contents

user1

Page 1SonicWALL Internet Security Appliance Regulatory Statement and Safety InstructionsModels APL04-016, APL04-017,1RK05-015, 1RK07-025, and 1RK08-026 are FCCClass A devices (for office use only), and the following statement is applicable to thesemodels*:FCC Part 15 Class A Notice NOTE: This equipment was tested and found to comply with the limits for a Class A digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference when the equipment is operated in a commercialenvironment. This equipment generates, uses, and can radiate radio frequency energy. And ifnot installed and used in accordance with the instruction manual, the device may cause harmfulinterference to radio communications. Operation of this equipment in a residential area is likelyto cause harmful interference in which case the user is required to correct the interference athis own expense. Complies with EN 55022 Class A and CISPR22 Class A. *Refer to the label on the bottom of the unit for device information including Class A or ClassB FCC information. Caution: Modifying this equipment or using this equipment for purposes not shown in thismanual without the written consent of SonicWALL, Inc. could void the user’s authority tooperate this equipment. Regulatory Model/Type Product NameAPL11-027 SOHO TZW (North America)APL11-031 SOHO TZW (International)APL10-01F TELE3 SP (Class B)APL04-01E TELE3 TZ and PRO 100 (Class B)APL11-024 TELE3 TZX (Class B)APL04-022 TELE3 (Class B) and SOHO3 (Class B)APL04-016 PRO 100 (Class A)APL04-017 TELE3 (Class A) and SOHO3 (Class A)1RK05-015 PRO 200 and PRO 3001RK07-025 PRO 2301RK08-026 PRO 330232-000330-03.fm Page 1 Thursday, April 3, 2003 10:31 AM
Page 2 BMSI Statement VCCI Statement Canadian Radio Frequency Emissions StatementThis Class A digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe A est conforme à toutes la norme NMB-003 du Canada.CISPR 22 (En 55022) Class AWarning: This is a class A product. In a domestic environment, this product may cause radiointerference in which case the user may be required to take adequate measures.Declaration of ConformityApplication of council Directive Directive 89/336/EEC (EMC) and 72/23/EEC (LVD)Standards to which conformity is declared EN 55022 (1998) Class AEN 55024 (1998) EN 61000-3-2 (1995) + A1, A2, A14EN 61000-3-3 (1994)EN 60950 (1992) + A1, A2, A4, A11National Deviations: AT, AU, BE, CH, CN, CZ, DE, DK, FI, FR, GB, GR, HU, IE, IL, IN, IT, JP, KR, NL, NO, PL, SE, SG, SI232-000330-03.fm Page 2 Thursday, April 3, 2003 10:31 AM
Page 3Class B InformationModels APL11-027, APL11-031, APL04-01E, APL10-01F, APL04-022, and APL11-024are Class B devices (for home and office use), and the following statement is applicable to thesemodels*:FCC Part 15 Class B NoticeNOTE:This equipment was tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy. And, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation. If the equipmentdoescause harmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try and correct the interferenceusing one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and the receiver.• Connect the equipment into an outlet on a circuit different from the receiver connection.• Consult SonicWALL for assistance. Complies with EN55022 Class B and CISPR22 Class B.*Refer to the label on the bottom of the unit for device information including Class A or ClassB FCC information.Canadian Radio Frequency Emissions StatementThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à toutes la norme NMB-003 du Canada.Declaration of ConformityApplication of council Directive Directive 89/336/EEC (EMC) and 72/23/EEC (LVD)Standards to which conformity is declared EN 55022 (1998) Class BEN 55024 (1998) EN 61000-3-2 (1995) + A1, A2, A14EN 61000-3-3 (1994)EN 60950 (1992) + A1, A2, A4, A11National Deviations: AT, AU, BE, CH, CN, CZ, DE, DK, FI, FR, GB, GR, HU, IE, IL, IN, IT, JP, KR, NL, NO, PL, SE, SG, SI232-000330-03.fm Page 3 Thursday, April 3, 2003 10:31 AM
Page 4 VCCI StatementFCC part 68 Telecom Information (Model APL10-01F)Repair Information - According to the FCC, only the modem vendor for the SonicWALL modemis allowed to service the modem. Contact SonicWALL Technical Support for any repairsincluding the modem. The FCC has established rules which permits this device to be directly connected to thetelephone network. If this device is malfunctioning, it may also cause harm to the telephonenetwork. This device should be disconnected until the source of the problem is determined andthe repair is made. If this is not done, the telephone company may temporarily disconnectservice. The telephone company may make changes in its technical operations and procedures. If suchchanges affect the compatability or use of this device, the telephone company is required togive adequate notice of the changes. If the telephone company requests information on theequipment connected to their lines, inform them of the following:• Telephone number of the line connected to the device.• The Ringer Equivalence Number (REN) located on the bottom of the device.• The device uses an RJ11-type jack. • The FCC Registration Number located on the bottom of the device. FCC RF Radiation Exposure Statement (Model APL11-027 and Model APL11-031)This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolledenvironment. This eequipment should be installed and operated with a minimum distance of20 centimeters (7.9 inches) between the radiator(antenna) and your body. This transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter. For more information regarding the above statement, please contact SonicWALL, Inc. at 1160Bordeaux Dr., Sunnyvale, CA 94089-1209 or 1-408-745-9600. 232-000330-03.fm Page 4 Thursday, April 3, 2003 10:31 AM
Page 5Lithium Battery Warning All ModelsThe Lithium Battery used in the SonicWALL Internet security appliance may not be replaced bythe user. The SonicWALL must be returned to a SonicWALL authorized service center forreplacement with the same or equivalent type recommended by the manufacturer. If, for anyreason, the battery or SonicWALL Internet security appliance must be disposed of, do sofollowing the battery manufacturer's instructions. Power Supply InformationModels APL04-016, APL04-017, APL04-01E, and APL04-022If the power supply is missing from your SonicWALL product package, please contactSonicWALL Technical Support at 408-752-7819 for a replacement. This product should only beused with a UL listed power supply marked “Class 2” or “LPS”, with an output rated 5V DC,minimum 1.5 A. Model APL11-027, APL11-031, and APL11-024If the power supply is missing from your SonicWALL product package, please contactSonicWALL Technical Support at 408-752-7819 for a replacement. This product should only beused with a UL listed power supply marked “Class 2” or “LPS”, with an output rated 5V DC,minimum 2.4 A.Mounting the SonicWALL PRO 200 , PRO 230, PRO 300, and PRO 330The SonicWALL PRO 200 and SonicWALL PRO 300 are designed to be mounted in a standard19-inch rack mount cabinet. The following conditions are required for proper installation:• Use the mounting hardware recommended by the rack manufacturer and ensure that the rack is adequate for the application.• Four mounting screws, compatible with the rack design, must be used and hand tight-ened to ensure secure installation. Choose a mounting location where all four mounting holes line up with those of the mounting bars of the 19-inch rack mount cabinet.• Mount in a location away from direct sunlight and sources of heat. A maximum ambient temperature of 104º F (40º C) is recommended.• Route cables away from power lines, fluorescent lighting fixtures, and sources of noise such as radios, transmitters, and broadband amplifiers• Ensure that no water or excessive moisture can enter the unit.• Allow unrestricted airflow around the unit and through the vents on the side of the unit. A minimum of 1 inch (25.44mm) clearance is recommended.232-000330-03.fm Page 5 Thursday, April 3, 2003 10:31 AM
Page 6 Mounting the SonicWALL SOHO TZWWall Mounting the SOHO TZWFollow the instructions below to mount the SOHO TZW on the wall.1. Using the mounting plate as a template, mark the places to insert the mounting anchors.2. Using a #2 Phillips screw driver, press the tip of the anchor into the marked places on the hollow wall. 3. Turn the screwdriver clockwise until the anchor is flush with the wall. Repeat for the second anchor.4. Insert a #6 x 11/4 pan head Phillips self-tapping screw into each anchor leaving a gap for the mounting plate.232-000330-03.fm Page 6 Thursday, April 3, 2003 10:31 AM
Page 7 5. Hang the mounting plate on the screws. 6. Slide the plate down to the narrowest part of the keyhole so that the mounting plate rests on the screws.7. Tighten the mounting screws to secure the mounting plate. 8. Snap the SOHO TZW onto the mounting plate. 232-000330-03.fm Page 7 Thursday, April 3, 2003 10:31 AM
Page 8 Mounting the SOHO TZW on the Ceiling1. Locate a metal support to hang the SOHO TZW.2. Using the mounting plate as a template, mark the places to insert the mounting anchors.3. Drill two holes for #6 x 1-1/4” screws in the marked location.4. Install the #6 x 1-1/4” self-tapping screws leaving a slight gap for the mounting plate. 5. Hang the mounting plate on the screws.6. Slide the plate down to the narrowest part of the keyhole so that the mounting plate rests on the screws.7. Tighten the mounting screws to secure the mounting plate.232-000330-03.fm Page 8 Thursday, April 3, 2003 10:31 AM
Page 9 8. Snap the SOHO TZW onto the mounting plate. Other Considerations for Mounting the SOHO TZW• Mount in a location away from direct sunlight and sources of heat. A maximum ambient temperature of 104º F (40º C) is recommended.• Route cables away from power lines, fluorescent lighting fixtures, and sources of noise such as radios, transmitters, and broadband amplifiers• Ensure that no water or excessive moisture can enter the unit.• Allow unrestricted airflow around the unit and through the vents on the side of the unit. Aminimum of 1 inch (25.44mm) clearance is recommended.232-000330-03.fm Page 9 Thursday, April 3, 2003 10:31 AM
Page 10 SonicWALL, Inc.1143 Borregas DriveSunnyvale, CA 94089Tel: (408) 745-9600Fax: (408) 745-9300E-mail: info@sonicwall.comWeb: www.sonicwall.comP/N 232-000330-03 Rev A. 4/03232-000330-03.fm Page 10 Thursday, April 3, 2003 10:31 AM

Navigation menu