Sunrex Technology 0511 Laser Presenter User Manual ML0511
Sunrex Technology Corp Laser Presenter ML0511
Manual
![](/img.php?id=695884&img=bg1.png)
ML0511,A200,A300 User Manual
HOW TO USE THE LASER PRESENTER
1. Insert the receiver into the USB port.
2. Your operation system will start to install the receiver
automatically .And you can see the information as below display in your
computer.
3. In Win98/Me operation system you need to follow the instructions on
your screen .During the install process , the O/S may ask you to put
Win98 CD into the CD-ROM .
4. After the install process finished ,the presenter will be working .
Better than other competition:
1. RF (2.4GHz) Any angle ,up to 7 Meters.
2. 256 ID and RF-technique to Anti-interference .
3. No matter what PC Off or Battery Out ,The ID will not be lose.
4. Add PowerPoint Mode .
Notice:
If the precenter is not working :
1. Maybe no power , please check your battery .
2. Maybe different ID ,please link ID.
(1).push the button on Receiver.
(2).press “ID Link” within 10 SEC .
Function Button
CAUTION
LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.
CLASS II LASER PRODUCT.
NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS
PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE FROM A LASER
POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSON'S EYES, MAY CAUSE
TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A CAMERA FLASH BULB. ALTHOUGH THIS
CONDITION IS TEMPORARY, IT CAN BECOME MORE DANGEROUS IF THE EXPOSED PERSON IS ENGAGED
IN A VISION-CRITICAL ACTIVITY SUCH AS DRIVING.
Specifications
Electrical/Presenter
Interface USB
Buttons F5/Esc , Page Up , Page Down , GoDark , White Screen ,Laser , ID Link
Channel Number One
ID Number 256
Battery life Up to 60 days
Input power One AAA battery (1.5 Volt, DC)
Transmission Radio Frequency
Modulation frequency 2.4GHz
Effective distance Up to 23.1 feet (7 m)
Power consumption Laser – 68 mA
Sleep Mode 20 uA
Compatibility Fully Compatible with PC/AT
Compatibility software Windows® 98/Me/2000/XP operating system
Laser wavelength at
peak emission 645-665 nm
Laser Spot size at
16.5 feet (5 m) 0.16 to 0.32 inch (4 to 8 mm)
Laser Cw output power 1mW (maximum)
Weight (without battery) 60 g
Dimensions (L x W x H) 130 x 48 x 31 mm
Receiver
Interface USB
Power DC 5V, 100mA Max
Button ID Setting
Weight 12g
Dimension (L x W x H) 80 x 21.5 x 12 mm
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.