Voxx Accessories PNJ50 SMART LIGHT & SOUND SOOTHER User Manual
Voxx Accessories Corp. SMART LIGHT & SOUND SOOTHER
User Manual
![](/img.php?id=3586170&img=bg1.png)
Back of the
Dreamweaver
What’s in the box?
(1) Dreamweaver Sound Soother Speaker
(1) Charging Cable
2. TURN ON THE DREAMWEAVER
Getting started
1. CHARGE THE DREAMWEAVER
Before you start using the
Dreamweaver for the first time,
it’s a good idea to charge it
completely.
To charge the Dreamweaver:
Open the DC IN flap on the
back of the Dreamweaver. Plug
the included charging cable
into the jack behind this flap.
Plug the other end into a power
source, like a computer or a USB
charging adapter. The indicator
above this jack turns red to show
the Dreamweaver is charging.
Press and hold the button on
the back of the Dreamweaver.
Everyday use
PLAYING SOUNDS
The Project Nursery Dreamweaver offers a variety of
soothing lullabies and nature sounds, as well as white noise,
to calm baby.
To cycle through these sounds:
Press the button on the back
of the Dreamweaver. Each press
goes to a different selection.
To adjust the volume: Press the
– or + button.
To turn sounds off: Press and
hold the button on the back
of the Dreamweaver. (If lights
are on, they remain on.)
Flap open
Back of the Dreamweaver
Back of the Dreamweaver
PAIRING WITH YOUR PHONE
(BLUETOOTH)
The Project Nursery Dreamweaver can also play music from
your smartphone or other Bluetooth device. Here’s how to
set it up.
With the Dreamweaver on, give
a short press to the button on
the back of the Dreamweaver. The
blue indicator light on the back of
the Dreamweaver starts blinking.
Enable Bluetooth on your
smartphone or other device (if it
isn’t already enabled).
Choose “PN Dreamweaver” from the list of pairing options
on your smartphone. (If it’s not in the list, choose “Scan”
from your phone’s Bluetooth menu.)
The Dreamweaver gives an audio signal when it’s finished
pairing and connecting to your smartphone. The indicator turns
solid blue.
Note: The process of enabling Bluetooth and connecting varies from device to
device. See your device’s owners manual for more information and specific
instructions.
Back of the Dreamweaver
![](/img.php?id=3586170&img=bg2.png)
Quick Start Guide
USING THE TIMER
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is turned on.
• The Bluetooth wireless connection works up to a range of roughly 33 feet (10
meters). This range may vary, however, based on other factors, such as room
layout, wall material, obstacles, your device’s Bluetooth performance, etc. If
you’re having problems connecting to this speaker, move closer to it.
• If your device asks you for a password to connect, use “0000”.
The timer shuts the lights
and sound off automatically
after a set amount of time.
To set the timer: Press the
button on the back of the
Dreamweaver.
The minutes indicator on the
back of the Dreamweaver
shows the amount of time on
the timer: 15, 30, 45, or 60
minutes.
Press to cycle through
these options or turn the
timer off.
USING THE NIGHTLIGHT
The Dreamweaver offers four kinds
of fun, firefly light modes.
To turn the light on: Press the
button on the back of the
projector.
To change light modes or turn
off the light: Press the button
repeatedly to cycle through the
modes (fade, sparkle, dance, and
rhythm) and to turn the light off.
Questions?
Just call 1-844-393-7338 or visit ProjectNursery.com
©2017 Voxx Accessories Corp.
3502 Woodview Trace, Suite 220
Indianapolis, IN 46268 PNJ50 QSG 01
DREAMWEAVER
SMART LIGHT & SOUND SOOTHER
Back of the Dreamweaver
Back of the Dreamweaver
![](/img.php?id=3586170&img=bg3.png)
IMPORTANT INFORMATION
for Project Nursery PNJ50
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION Caution: To reduce the risk of electric shock, do not remove cover (or back).
No user serviceable parts inside. Refer servicing to qualified service personnel.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
7. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
8. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
9. Unplug this apparatus during lightning storms or
when unused for long periods of time.
10. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Care and Maintenance
• Always use a soft cloth to clean the speaker and transmitter. Never use any product containing alcohol or other
solvents as they may damage the surface.
• Use caution when plugging the power transformers in an AC outlet to avoid the risk of electric shock.
• If the speaker are used outside on a deck or patio, make sure you take them indoors in the event of a rainstorm to
prevent possible damage.
• Do not operate or store the system in extreme temperatures (below 32ºF/0ºC and above 122ºF/50ºC).
For PLUGGABLE EQUIPMENT, the socket-outlet shall
be installed near the equipment and shall be easily
accessible.
The power unit for this device should be plugged in so
that it stays vertical or lies flat.
The apparatus shall not be exposed to dripping or
splashing or placed near objects filled with liquids.
This product contains a non-removeable Lithium Ion
rechargeable battery.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference, and 2) This device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
PNJ50 Safety-Warranty 01
Ecology
At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this
product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product,
user’s guide and/or box indicates this.
Some of the product materials can be reused if you take them to a recycling point. By reusing some parts or raw
materials from used products you make an important contribution to the protection of the environment. Please
contact your local authorities in case you need more information on the collection points in your area. Dispose of the
battery pack in an environmentally-friendly manner according to your local regulations.
RF Exposure Warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for
this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide
with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Industry Canada Regulatory Information
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following
two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including
interference that may cause undesired operation of the device.
IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with
RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
Industry Canada Regulatory Information: CAN ICES-3 (B)/NMB-3 (B)
Avis d’Industrie Canada: CAN ICES-3 (B)/NMB-3 (B)
The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by VOXX Accessories Corporation is under license. Other trademarks and trade names are those of their
respective owners.
Product Information
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and
record the serial and model numbers in case you need them. These numbers are located on the product.
Model No.: _____________________________________________________________________
Purchase Date: _________________________________________________________________
Dealer/Address/Phone: ___________________________________________________________
12 Month Limited Warranty
Voxx Accessories Corporation (the “Company”) warrants to the original retail purchaser of this product that should this
product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12
months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product
(at the Company’s option) without charge for parts and repair labor. To obtain repair or replacement within the terms of the
warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s),
transportation prepaid, to an approved warranty station. For the location of the nearest warranty station to you, call toll-free
to our control office: 1-800-645-4994.
This Warranty is not transferable and does not cover product purchased, serviced or used outside the United States or
Canada. The warranty does not extend to the elimination of externally generated static, noise, or loss of range or audio/
video quality due to external factors, to costs incurred for the installation, removal or reinstallation of the product, or to
damage to digital media devices or memory. The warranty does not apply to any product or part thereof which, in the
opinion of the company, has suffered or been damaged through alteration, improper installation, mishandling, misuse,
neglect, accident or exposure to moisture. This warranty does not apply to damage caused by an AC adapter not provided
with the product or by removal or defacement of factory serial number/barcode labels. THE EXTENT OF THE COMPANY’S
LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO
EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO DURATION OF
THIS WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER, INCLUDING ANY IMPLIED WARRANTY,
MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE
SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person
or representative is authorized to assume for the Company any liability other than expressed herein in connection with the
sale of this product. Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or
limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty
gives you specific legal rights and you may also have other rights which vary from state/province to state/province.
©2017 Voxx Accessories Corp. 3502 Woodview Trace, Suite 220 Indianapolis, IN 46268
For customer service, call 1-844-393-7338
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by VOXX Accessories Corporation could void the user’s
authority to operate the equipment.
WARNING:
CHOKING HAZARD - Small parts
Not for children under 3 yrs.