Xiaomi Communications RM6117 Mobile Phone User Manual 2AFZZ RM6117
Xiaomi Communications Co., Ltd. Mobile Phone 2AFZZ RM6117
Contents
- 1. 2AFZZ-RM6117 User Manual
- 2. 2AFZZ-RM6117_Mi Phone User Guide
2AFZZ-RM6117 User Manual
![](/img.php?id=3192355&img=bg1.png)
紫兴128g高白无光铜
pantone cool gray 8c
Xiaomi Communications Co., Ltd.
Model: 2016117
All rights reserved by Xiaomi Inc. 000000000000-A
Thank you for choosing Redmi 4A
Long press the power button to turn on the device.
Follow the instructions on the screen to configure
your device.
For more information
Visit our official website: www.mi.com.
MIUI
Redmi 4A is pre-loaded with MIUI, our customised
Android-based OS which pushes out frequent updates and
user friendly features suggested by over 200 million active
users globally. Visit www.miui.com for more information.
Correct Disposal of this product. This marking indicates
that this product should not be disposed with other
household wastes throughout the EU.
To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly
to promote the sustainable reuse of material resources.
To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
To prevent possible hearing damage,
do not listen at high volume levels for long periods.
Model: 2016117 SAR 10g limit:2.0W/Kg,
SAR Value:Head: 0.525W/Kg,
Body: 1.181W/Kg (MAX, 5mm distance)
Important safety information
About Dual SIM:
When 2 SIM cards are in use, only one SIM will have
4G/3G/2G while the other SIM will be on 3G/2G.
Tray 1 supports Micro-SIM card;
Tray 2 supports Nano-SIM card / MicroSD card.
SIM Card Tray:
Micro-SIM Micro-SIM
Nano-SIM Micro SD
Temperature: 0℃—40℃
Adapter shall be installed near the equipment
and shall be easily accessible.
Redmi 4A
Volume
Button
Power
Button
Home Button
USB Port
Back
Button
Menu
Button
填写供应商对应单品料号
(此处应为入门指南料号)
R&TTE Declaration of Conformity
We, Xiaomi Communications Co., Ltd.
The Rainbow City of China Resources, NO.68, Qinghe Middle Street,
Haidian District, Beijing, China
100085
Hereby, Xiaomi Communications Co., Ltd. declares that this GSM/
GPRS/EDGE/UMTS/LTE Digital Mobile Phone with Bluetooth
and WiFi 2 0 16 117 is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
The declaration of conformity be consulted at
www.mi.com/en/certication
Body-worn SAR testing has been carried out at a separation distance of
5 mm(2016117). To meet RF exposure guidelines during
body-worn operation, the device should be positioned at least this distance
away from the body.
If you are not using an approved accessory ensure that whatever product
is used is free of any metal and that it positions the phone the indicated
distance away from the body.
Ensure that the power adapter used meets the requirements of Clause 2.5 in
IEC60950-1/EN60950-1 and has been tested and approved according to national or
local standards.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to
radio waves.This device is designed and manufactured not to
exceed the emission limits for exposure to radio frequency (RF)
energy.The exposure standard for wireless device employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg.
The highest SAR value for the model device as reported to the
FCC when tested for use at the ear is 0.54 W/kg and when worn
on the body, as described in this user guide, is 0.82 W/kg (Body-
worn measurements differ among device models, depending upon
available accessories and FCC requirements), and hotspot mode
is 0.82 W/kg.
For body worn operation, this device has been tested and meets
the FCC RF exposure guidelines for use with an accessory that
contains no metal and be positioned a minimum of 1.0cm from the
body. Use of other accessories may not ensure compliance with
FCC RF exposure guidelines. If you do not use a body-worn
accessory and are not holding the device at the ear, position the
handset a minimum of 1.0cm from your body when the device is
switched on.
FCC Regulations:
This mobile phone complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
a residential installation. This equipment generates, uses and can radiated radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Note:
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user‘s authority to operate
the equipment.
This mobile phone has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in