ZAGG EXCHANGE Exchange Bluetooth Speaker User Manual ZAGG Exchange Speaker Instructions
ZAGG Inc. Exchange Bluetooth Speaker ZAGG Exchange Speaker Instructions
ZAGG >
Contents
- 1. User Manual
- 2. Speaker Instructions
User Manual
![](/img.php?id=2459680&img=bg1.png)
ZAGG Exchange Speaker Instructions
MODEL:ZGEXSP-BS0
Input Current:5V---,0.5A
![](/img.php?id=2459680&img=bg2.png)
®
Your ZAGG Exchange Bluetooth speaker comes with a one-year
manufacturer's warranty. Please keep your purchase receipt and
register your Exchange on our website (purchases made on our
website are automatically registered). Replacement products must
be mailed back as soon as your new product arrives; you may incur
postage fees as a result. See our website FAQs for further details.
The ZAGG Exchange speaker is the tiny, do-it-all wireless
Bluetooth speaker. Its powerful driver delivers big, crisp sound
that's ideal for all types of music; and with its easy call controls,
built-in mic, and magnetic visor clip it's ideal for taking conference
calls on the go. Read these instructions and keep them in a safe
place for future reference.
Warranty Registration
Introduction
Your ZAGG Exchange speaker is charged and ready to deliver up
to 10 hours of play and talk time. Simply turn it on, pair it, and begin
enjoying your music and calls in clear, high-fidelity audio that goes
everywhere. Here's how to turn on and pair your Exchange speaker.
Powering and Pairing
![](/img.php?id=2459680&img=bg3.png)
®
1. Make sure your device's Bluetooth connection in enabled. You
can do this on many devices by accessing the SETTINGS menu,
and then choosing GENERAL BLUETOOTH ON.
2. Press and hold the power button until you hear the power up tone.
The LED above the power button will light blue and flash every
seven seconds indicating the Exchange is on.
3. Select “ZAGG Exchange” in your list of available Bluetooth
devices. A tone will sound to indicate your Exchange has paired
successfully.
NOTE: When powered on, the Exchange speaker automatically
begins searching for devices to pair with. If no device is
discovered it will enter pairing mode and the LED above the
power button will alternate flashing red and blue for two minutes.
If no device is found after two minutes, the Exchange will enter
standby mode for three minutes and then begin pairing again.
This cycle will continue for fifteen minutes, or until the Exchange
pairs with a device. If it has not paired after fifteen minutes, the
Exchange speaker will automatically power off.
4. When you are ready to turn your ZAGG Exchange speaker off,
simply hold the power button for three seconds, or until you hear
the power off tone.
![](/img.php?id=2459680&img=bg4.png)
With your Exchange speaker paired, it is ready to deliver hours of
crystal clear music and calls. Here's how to control your tunes and
take calls.
(I thought we could include an image of the speaker here and use
callouts for its various functions. Callouts are listed below.)
Play/Pause/Power button – Press and hold to turn your
Exchange on and off. Press once to play music. With music
playing, press once to pause and resume.
Volume Up/Track Advance – Press and hold to increase the
volume. Press once to track forward on your selected playlist.
Mute/Check Battery – While on a call, press once to mute the
call (the left LED will light red until mute is turned off); press
again to resume your conversation. When not on a call, press
to check remaining battery power.
Battery Indicator (LED above the mute button) – The LED
flashes one of three colors to indicate remaining battery level.
Green indicates more than 66% battery life remaining. Yellow
indicates between 33-66% remaining. Red indicates you have
less than 33% battery life remaining.
Voice Activation – Press to activate your device's voice
activation program.
Volume Down/Track Back – Press and hold to decrease the
•
•
•
•
•
•
Music and Call Controls
![](/img.php?id=2459680&img=bg5.png)
volume. Press once to track backward on your selected playlist.
Answer/Disconnect Call – Press once to receive an incoming
call. Press again to disconnect the call.
•
Your ZAGG Exchange comes charged and ready to play. When
you need to charge it, here's how:
1. Connect the micro USB end of the included charging cable
to your Exchange speaker.
2. Connect the USB end of the charging cable to your preferred
charging solution.
3. The LED above the power button will light red to indicate the
Exchange is charging. Wait until this light turns off, indicating
a full charge. Charging the Exchange from zero to a full charge
takes approximately two hours.
4. When your Exchange is charged and ready for more play,
simply disconnect the charging cable and enjoy your music
and calls anywhere you go.
Charging Your ZAGG Exchange
![](/img.php?id=2459680&img=bg6.png)
Your ZAGG Exchange speaker is designed to go everywhere with
you. Here are some tips on how to best care for it.
1. Use the visor clip to attach the Exchange in the most convenient
spot for everyone to enjoy. If you don't need the visor clip,
simply remove it. The clip attaches magnetically so it's easy to
remove or replace. NOTE: While the magnet on the visor clip is
powerful, it may become dislodged with abrupt
2. force. Do not clip your Exchange speaker in a place where it
may come loose from the visor clip and fall or be exposed to
other harm.
3. Keep your Exchange speaker free from dirt and water. If your
Exchange is exposed to dirt and grime, wipe it clean using a
damp cloth. Do not expose the Exchange speaker or any of its
buttons or ports to water. If it does get water on it, wipe it clean
and consider placing it in a bag of rice, or other desiccant, to try
and remove any remaining moisture.
4. If your Exchange speaker is exposed to impact, examine it
closely for damage before using, or charging, it.
5. If your Exchange has trouble pairing or is performing oddly,
press and hold the power button for ten seconds to reset its
software.
Care and Maintenance
![](/img.php?id=2459680&img=bg7.png)
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
•
•
•
•
![](/img.php?id=2459680&img=bg8.png)
(1)Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type.
(2)Battery shall not be exposed to excessive heat such as sunshine,
fire or the like.
(/Battery's information):MLP383759, 3,7Vd.c., 950mAh
Caution:
For more help please see our FAQ at: www.ZAGG.com/faq
To reach a trained customer service representative, please use
one of the following:
ZAGG.com/support
questions@zagg.com
1-800-700-ZAGG [9244]
00-1-801-839-3906 for international customers
©2005 - 2014 ZAGG Inc | All Rights Reserved
NASDAQ: ZAGG | MADE IN CHINA
are trademarks or registered
trademarks of ZAGG Intellectual Property Holding Co., Inc.
®
Bluetooth is a registered trademark of Bluetooth, SIG.
®
ZAGG and ZAGG Exchange™