ZTE ZTEC330 800MHz CDMA2000 1X Mobile Phone User Manual ZTE C330
ZTE Corporation 800MHz CDMA2000 1X Mobile Phone ZTE C330
ZTE >
User Manual
![](/img.php?id=917051&img=bg1.png)
C330
CDMA 1X Digital Mobile Phone
User Manual
Copyright © 2007 by ZTE Corporation
All rights reserved.
No part of this publication may be excerpted, reproduced,
translated or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right
to make modifications on print errors or update specifications without
prior notice.
Version: Release 1.0
Date: Sep 2007
Manual number:0000000000
![](/img.php?id=917051&img=bg3.png)
i
Content
1 General Information....................................................... 1
1.1 Welcome....................................................................................1
1.2 Security.....................................................................................1
1.3 Safety Warnings ..............................................................2
1.4 Limit Warranty..........................................................................6
1.5 Limitation of Liability...............................................................7
2 Know Your Phone............................................................ 8
2.1 Keypad......................................................................................8
2.2 Instruction of Interface Icon....................................................11
2.3 Technical Parameters...............................................................11
2.4 Battery.....................................................................................12
2.4.1 Remove and Installation of Battery .................................12
2.4.2 Charging the Battery........................................................13
2.5 Connecting to the Network .....................................................15
2.5.1 UIM Card ........................................................................15
2.5.2 Insertion and Extraction of UIM Card.............................15
2.5.3 Power on/off Phone .........................................................16
2.5.4 PIN Code.........................................................................16
2.5.5 Connecting the Network..................................................17
![](/img.php?id=917051&img=bg4.png)
ii
3 Basic Operations............................................................ 18
3.1 Making a Call..........................................................................18
3.2 Answering a Call.....................................................................20
3.2.1 Setting Any Key Answer .................................................20
3.2.2 Incoming Call Silence .....................................................20
3.3 In Conversation.......................................................................21
3.3.1 Silence in Conversation...................................................21
3.3.2 Adjusting Volume in Conversation..................................21
3.3.3 Selecting Options in Conversation ..................................21
3.4 Menu Functions ......................................................................21
4 Names............................................................................. 23
4.1 Finding Records......................................................................23
4.2 Adding New Record................................................................24
4.3 Viewing Records.....................................................................26
4.4 Erasing Records ......................................................................27
4.4.1 Erasing a Record..............................................................27
4.4.2 Erasing All Contacts........................................................27
4.5 Editing Records.......................................................................28
4.6 Setting Speed Dial...................................................................28
4.7 Viewing and Making Speed Dial.............................................29
4.8 Editing Group..........................................................................29
4.9 Memory Status........................................................................30
![](/img.php?id=917051&img=bg5.png)
iii
5 Messages......................................................................... 31
5.1 Sending a New Message .........................................................31
5.2 Receiving Incoming Call while Editing Message ...................32
5.3 Reading Message ....................................................................32
5.4 Viewing OutBox .....................................................................33
5.5 Reading Voice Mail.................................................................33
5.6 Sending Templates Messages..................................................34
5.7 Setting Message Groups..........................................................34
5.8 Erasing Messages....................................................................35
5.8.1 Erasing a Message...........................................................35
5.8.2 Erasing All Messages ......................................................35
5.9 Message Settings.....................................................................36
5.9.1 Msg Priority.....................................................................36
5.9.2 Delivery Acknowledging.................................................36
5.9.3 Save Sent Message..........................................................36
5.9.4 Automatically Erasing Inbox...........................................37
5.9.5 Save Position...................................................................37
5.9.6 Memory Status.................................................................37
6 Call History.................................................................... 39
6.1 Viewing Recent Calls..............................................................39
6.2 Erasing Recent Calls List........................................................40
6.3 Call Duration...........................................................................40
![](/img.php?id=917051&img=bg6.png)
iv
7 Profiles............................................................................ 41
8 Display............................................................................ 42
8.1 Selecting Wallpaper.................................................................42
8.2 Setting Backlighting................................................................42
8.3 Setting Intensity ......................................................................43
8.4 Adjusting Contrast...................................................................43
8.5 Selecting Language.................................................................43
8.6 Setting Time Format................................................................43
8.7 Changing Banner.....................................................................43
9 Settings........................................................................... 45
9.1 Call..........................................................................................45
9.1.1 Call Waiting.....................................................................45
9.1.2 Call Forwarding...............................................................46
9.1.3 Anykey Answer ...............................................................47
9.1.4 Voice Privacy...................................................................47
9.1.5 International Call.............................................................47
9.1.6 Call Timer........................................................................48
9.1.7 Call Connect Alert...........................................................48
9.1.8 Fire Proof.........................................................................49
9.2 Security Settings .....................................................................50
9.2.1 Setting PIN Code.............................................................50
9.2.2 Setting Phone Lock..........................................................50
![](/img.php?id=917051&img=bg7.png)
v
9.2.3 Viewing Emergency Numbers.........................................51
9.2.4 Resetting..........................................................................51
9.3 Phone ......................................................................................51
9.3.1 Auto Key Guard...............................................................51
9.3.2 Alert.................................................................................52
9.3.3 Version.............................................................................53
10 Organiser ....................................................................... 54
10.1 Scheduler ..............................................................................54
10.2 Voice Memo..........................................................................54
10.2.1 Recording in Normal.....................................................55
10.2.2 Recording in Conversation ............................................55
10.2.3 Recording with Incoming Call/Message........................56
10.3 Alarm ....................................................................................56
10.4 Stopwatch..............................................................................57
10.5 Calculator..............................................................................57
11 Do More ......................................................................... 59
12 Games............................................................................. 60
13 Text Input....................................................................... 62
10.1 Multitap Input .......................................................................63
10.2 Numbers Input ......................................................................63
10.3 eHiText Input ........................................................................63
10.4 Symbols Input.......................................................................64
![](/img.php?id=917051&img=bg8.png)
vi
14 Troubleshooting............................................................. 65
![](/img.php?id=917051&img=bg9.png)
1
1 General Information
1.1 Welcome
Thank you for choosing C330 CDMA 1X Digital Mobile Phone.
To guarantee the mobile phone always in its best condition, please
read this manual carefully and keep it for future use.
The pictures, symbols and contents in this manual are just for your
reference. They might not be completely identical with your phone.
Please subject to the real object. ZTE operates a policy of continuous
development and reserves the right to update and modify the technical
specifications in this document at any time without prior notice.
1.2 Security
If your mobile phone is lost or stolen, please report to your service
provider or agencies of banning the use of your lost UIM card and
phone, which will protect you from economic losses resulted from
unauthorized use.
You need to provide the phone’s ESN number labeled. You can
see ESN number after removing the battery. Please keep ESN
number for future use.
To protect your mobile phone from illegal use, please take the
security measures as follows:
¾ Set PIN code of the UIM card.
![](/img.php?id=917051&img=bga.png)
2
¾ Take it with you as you can.
1.3 Safety Warnings
To the Owner
Some electronic devices are susceptible to electromagnetic
interference sent by mobile phone if inadequately shielded, such
as electronic system of vehicles. Please consult the manufacturer
on the device before using the phone if necessary.
Operating of mobile phone may interfere with medical devices like
hearing aides and pacemakers. Please always keep the mobile
phone more than 20 centimeters away from such medical devices
when the phone is powered on. Do not carry the mobile phone in
the breast pocket. Power the mobile phone off if necessary.
Consult a physician or the manufacturer on the medical device
before using the phone.
Be aware of the usage limitation when using a mobile phone at
places such as oil warehouses or chemical factories, where there
are explosive gases or explosive products being processed,
because even if your phone is in standby mode, it still transmits
radio frequency (RF) energy. Therefore, power off your phone if
required.
Pay attention to traffic safety. Do not use your mobile phone while
driving. Park before making or answering a call.
Store the phone out of the reach of little children. The phone may
![](/img.php?id=917051&img=bgb.png)
3
cause injury if used as a toy.
Mobile Phone
Please use original accessories or accessories that are
authorized by the manufacturer. Using any unauthorized
accessories may affect your mobile phone’s performance, and
violate related national regulations about telecom terminals, or
even endanger your body
If you want to clean your phone, please use clean fabric that is a
bit wet or anti-static. Do not use harsh chemical cleaning solvents
or strong detergents to clean it. Turn off your phone before you
clean it.
As your mobile phone can produce electromagnetic field, do not
place it near magnetic items such as computer disks.
Using the phone near electrical appliances such as TV, telephone,
radio and personal computer can cause interference, which
affects the function of the phone.
Do not expose your mobile phone to direct sunlight or store it in
hot areas. High temperatures can shorten the life of electronic
devices.
Prevent liquid from leaking into your phone.
Do not drop, knock or harshly treat your phone. Rough handling
can break internal circuit boards.
Do not connect the phone with other unauthorized peripheral
equipments.
![](/img.php?id=917051&img=bgc.png)
4
Do not attempt to disassemble the mobile phone and battery by
yourself. Non-expert handling of the devices may damage them.
Do not charge the mobile phone without battery.
On occasion of emergent calling, keep your phone in status of
power on and in area of service. On the condition of standby,
press the key to enter emergency phone number, and then press
Send key to make a phone call.
The user is cautioned that changes or modifications not expressly
approved by the manufacturer could void the user’s authority to operate
the equipment.
This device meets the government’s requirements for exposure to radio
waves. This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set by the
U.S. Federal Communications Commission.
The exposure standard for wireless devices employs a unit of
measurement known as the Specific Absorption Rate (SAR). The SAR
limit set by the FCC is 1.6 W/kg.
To comply with FCC RF exposure compliance requirements, this grant
is applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least
1.5 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
![](/img.php?id=917051&img=bgd.png)
5
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Battery Using
Do not short-circuit the battery, as this can cause excessive heat
and fire.
Do not store battery in hot areas or dispose of it in a fire to avoid
explosion.
Never use any charger or battery damaged or worn out.
Return the wear-out battery to the provider or put it in the
appointed recycle place. Do not put it in familial rubbish.
Declared that the product is installed with battery separately in
the box. The FCC ID label is placed on the mobile phone clearly
visible to all persons at the time of purchase.
Warning: If the battery is broken, keep away from content. If it
taints your skin, wash your skin with abundant fresh water and
ask doctor for help if necessary.
Safety and General Using in Vehicles
Before making or answering a call, you should pay attention to
the local laws about using wireless mobile phones and take them
into account in practical use.
![](/img.php?id=917051&img=bge.png)
6
Safety airbag, brake, speed control system and oil eject system
shouldn’t be affected by wireless transmitting. If you do meet
problems above, please contact your automobile provider.
Please power off your mobile phone when refueling your
automobile, and so do the place where duplex wireless
equipments are banned. Don’t put your phone together with
flammable or explosive items, as inner spark may cause fire.
In Aircraft
Follow the restrictions in aircraft. Wireless devices can cause
interference in aircraft.
Please power off your mobile phone before taking off till landing. In
order to protect airplane’s communication system from
interference, it is never allowed to use mobile phone when it is in
flight. Using mobile phone before the plane taking off should get
aircrew’s permission according to safety regulations.
1.4 Limit Warranty
The warranty does not apply to defects or errors in the product
caused by:
(a) Reasonable abrasion.
(b) Misuse including mishandling, physical damage, improper
installation, unauthorized disassembly of the product.
(c) Water or any other liquid damage.
![](/img.php?id=917051&img=bgf.png)
7
(d) Any unauthorized repair or modification.
(e) Power surges, lightning damage, fire, flood or other events
outside ZTE’s reasonable control.
(f) Use of the product with any unauthorized third party
products such as generic chargers.
(g) Any other cause beyond the range of normal usage for
products.
End User shall have no right to reject, return, or receive a
refund for any product from ZTE under the above-mentioned
situations.
This warranty is end user’s sole remedy and ZTE’s sole liability
for defective or nonconforming items, and is in lieu of all other
warranties, expressed, implied or statutory, including but not
limited to the implied warranties of merchantability and fitness for a
particular purpose, unless otherwise required under the mandatory
provisions of the law.
1.5 Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special,
incidental or consequential damages resulting from or arising out of or
in connection with using this product, whether or not ZTE had been
advised, knew or should have known the possibility of such damages.
![](/img.php?id=917051&img=bg10.png)
8
2 Know Your Phone
2.1 Keypad
Key Tip Function Description
Send
key
Make or answer a call.
Press Send key in standby mode to
enter all calls list.
Press Send key two times directly
to redial the last number.
Scroll key
End key
Right select key
Earpiece
LCD screen
Charger connector/Earphone
0~9 Number key
Microphone
Left select key
Send key
![](/img.php?id=917051&img=bg11.png)
9
End
key
End an active call or reject a call.
Power on/power off.
Exit from any interface to standby
mode.
Left
/Right
select
key
Enter main menu in standby mode.
Switch to the options of left/right
bottom submenu.
OK key
Confirm the commands and options
selected.
Confirm the character chosen while
character inputting.
Up/Dow
n key
(Scroll
key)
Scroll the cursor up and down.
Used as selection key up and down
for keying in commands and
selecting options shown on the
display.
In standby mode, hold Up key to
set Silence All; Press Down key
to enter Ring Tone menu.
Press Up key to enter Messages
menu.
Used as direction key in games.
Left/Rig Scroll the cursor left and right.
![](/img.php?id=917051&img=bg12.png)
10
ht key
(Scroll
key)
Used as selection key to scroll
cursor left and right for keying in
commands and selecting options
shown on the display.
In standby mode, press Left key
to enter MobileShop menu, press
Right key to enter Games menu.
Adjust volume in conversation.
Used as direction key in games.
~
0~9
Number
key
Key in numbers or characters.
Make a Speed Dial call.
*key,
#key
# key:
Hold # key in standby mode to lock
phone’s keypad.
Press # key to select text mode.
* key:
Hold
* key in standby mode to
enable/disable vibration.
Press
* key once to enter Symbols
mode in text input mode.
Note: To “press” the key in this manual means to press the key and
release it. To “hold” the key means to keep pressing the key for two
![](/img.php?id=917051&img=bg13.png)
11
seconds or more.
2.2 Instruction of Interface Icon
Icon Indication
Signal strength
Roaming
New message
Vibration
Silence All
Alarm
Power indicator
2.3 Technical Parameters
Handset
Type ZTE C330
Dimensions (Width×Height×Thickness)
45.4mm×104mm×13mm
Weight About 70g(Battery Included)
Battery
Continuous standby
time
About 80h~160h (Subject to Network)
Continuous talk time About 2h~4h (Subject to Network)
Note: Please refer to the real phone for other relative parameters
of the battery and charger.
![](/img.php?id=917051&img=bg14.png)
12
2.4 Battery
The attached Li-ion battery along with the phone can be used after
unpacking. For the first three times, please use up the power and
charge it fully for a new battery to perform well.
2.4.1 Remove and Installation of Battery
Remove:(1) Press and push the back-cover of the phone down to
release and remove it off the phone. (2) Put finger on the side
finger grips, and then lift up the battery from the finger grips to
remove the battery.
Installation:(1) Replace the battery into the battery slot, to be
noted that the lower end of the battery firstly inserted. (2) Put the
back-cover of the phone flatly upon the body of phone. Direct the
back cover towards the locking catches on the both sides of the
phone and push the back-cover of the phone upward to lock the
cover into its place.
![](/img.php?id=917051&img=bg15.png)
13
2.4.2 Charging the Battery
Plug out rubber away (turn 180° as shown in the picture) from
the jack on the bottom of the handset and connect the lead from
the charger to the socket on the bottom of the phone. (Note:
The side with arrow should be upright while connecting).
Connect the charger to a standard wall AC socket.
Meanwhile, the charging indicator in up-right corner of the
display flops cyclically, indicating the charging is going. In
power-off mode while charging, the display only shows the
charge indicator. If the battery is completely flat in storage or
![](/img.php?id=917051&img=bg16.png)
14
used up, it may take for a while before the charging indicator
appears on the display or any calls can be made.
When the charging indicator on the screen stops flopping, the
charging is completed. The charging takes usually up to 2~3
hours. In the process of charging, it is a normal phenomenon
that the battery, phone and charger get into hot accordingly.
After the completion of charging, disconnect the charger from
the phone and AC socket.
Note:
When it is in charge, place the phone on condition of good
ventilation and temperature between -5℃~+45℃. Ensure to
use the charger offered by the manufacturer. Using unauthorized
charger may cause danger and violate the authorization of the
phone and the guarantee article.
When the phone is automatically switched off or indicates the
alarm information of power shortage, please charge the battery in
time.
The duration time of the standby status or conversation of the
phone is based on ideal working environment. In practice, the
working time of battery varies with network condition, working
environment and application methods.
![](/img.php?id=917051&img=bg17.png)
15
2.5 Connecting to the Network
2.5.1 UIM Card
Before using the phone, please insert effective UIM (User Identity
Module) card into the phone.
All the information related to the network connection is recorded
in the metal plane area of UIM card together with the information you
stored in your Contacts in the UIM card. The UIM card can be inserted
into any CDMA phone to use (new phone automatically reads UIM
card).
Please do not touch the metal plane area of the card to avoid
missing and damaging information in the card and put UIM card in
place far away from electricity and magnetism.
Warning:Please power off the phone before taking out UIM card.
It is prohibited to insert or taking out UIM card in the condition of
connecting with external power.
2.5.2 Insertion and Extraction of UIM Card
Power off the phone, remove the battery and other external
power.
Insert UIM card into UIM card slot in the phone.
Pull out UIM card out of slot, as shown in picture hereinafter.
![](/img.php?id=917051&img=bg18.png)
16
2.5.3 Power on/off Phone
Press and hold End key to power on/off the phone.The phone will
check whether UIM card inserted well or not. And then follow the
prompt indication on the display:
Enter PIN——Key in PIN code of UIM card if it is set.
Searching——Search appropriate network connected.
2.5.4 PIN Code
To set PIN code (personal identification number) is to avoid the
illegal usage of UIM card.
To input PIN code of UIM card and press OK key to confirm to
start on using phone. If inputting wrong PIN three times continuously,
UIM card will be locked by network.
Note:The network provider offers you PIN code (four to eight
digits). You should change PIN code as soon as possible for security.
To set PIN code, see “9.2 Security Settings”.
![](/img.php?id=917051&img=bg19.png)
17
2.5.5 Connecting the Network
After powering on and inputting PIN code, the phone
automatically searches the network available and in state of standby
mode.
Besides sending and receiving calls, you can also do:
Press Left select key to enter main Menu.
Press Right select key to enter Find menu.
Hold # key to lock phone’s keypad.
Hold
* key to enable/disable viration mode.
Hold Up key to set the phone in Silence All.
Press Up key to enter Messages menu.
Press Left key to enter MobileShop menu.
Press Right key to Enter Games menu.
Press Send key to enter All Calls list.
![](/img.php?id=917051&img=bg1a.png)
18
3 Basic Operations
3.1 Making a Call
Please ensure that you are in the place where the signal can be
received. Examine network signal strength icon on the screen.
The more the indication bars, the stronger the intensity of receiving
signal is. If there is no bar, please move to the place where the intensity
of receiving signal is better. Sometimes, you only need to change the
direction.
Making a National Call
Press Number key to key in phone number, and add area code
when making a long distance call (no need to add area code
when dialing local number in some area). Press Send key to
call out. Press End key to end the call and conversation.
Making an International Call
Enter the country code, area code (without the leading 0) and
the complete telephone number you want to dial, press Send
![](/img.php?id=917051&img=bg1b.png)
19
key to call out.
Before the country code, hold 0 key to enter the international
prefix “+” (the character “+” replaces the international access
code) or key in international prefix e.g. “00” of international call
directly.
Making Recent Calls
All calls you recently dialed, received or missed are saved in
your phone. All numbers are grouped as Missed Calls,
Received Calls and Dialed Calls. When the list is full, the oldest
number will be erased automatically when new record is
coming.
You can check the list as follows:
In standby mode, press Send key to view All Recent Calls.
The number listed in can be directly dialed by pressing
Send key.
Making Pause Calls
You can make use of pause call to dial an extention or voice
service call.
E.g. Key in phone number, press OK key to select “P” on the
display (character “P” added accordingly), and then key in number
Country code + Area code + Telephone number
0086 755 26770000
![](/img.php?id=917051&img=bg1c.png)
20
afterwards. Press Send key to dial the first number, when connected,
press Send key again to dial the second number automatically. “P” can
be used for not once only.
3.2 Answering a Call
When a call is incoming in standby mode, the phone will offer
corresponding ringer or vibration to prompt according to your settings.
With the number already saved in Names, the phone also shows the
name of caller meanwhile.
• Press Send key to answer an incoming call.
• Press End key to end a call and the call time is temporarily
displayed.
See “9.1 Call” refer to other ways of answering calls for your option
as follows.
3.2.1 Setting Any Key Answer
• Select Menu→ Settings→ Call → Anykey Answer.
• Select On/Off, and press OK key.
An incoming call can be answered by pressing any key except End
key, Left /Right select key.
3.2.2 Incoming Call Silence
• When a call is coming, press Right select key to select
![](/img.php?id=917051&img=bg1d.png)
21
Mute/Unmute the ringer tone.
• This function silences the current incoming call only. The phone
will ring normally as next call coming.
3.3 In Conversation
3.3.1 Silence in Conversation
During conversation, you can select Option (Names, Messages,
Record) or Mute displayed. Select Mute to let the other party
temporarily not hear your voice; Select Unmute back to normal. You
can also enter Names, Messages or Record during a conversation.
3.3.2 Adjusting Volume in Conversation
Press Left/Right key to adjust volume of Earpiece during a call.
3.3.3 Selecting Options in Conversation
During a call, press Left/Right select key to select options of
Mute/Unmute, Option (Names, Messages or Record), etc.
Select Mute/Unmute to let the other party temporarily can
or can not hear your voice;
Select Option for selection in Menu, such as Names,
Messages or Record with no worry about the ending of
conversation.
3.4 Menu Functions
Main Menu Function:
![](/img.php?id=917051&img=bg1e.png)
22
i. In standby mode, press Left select key to enter main Menu. Scroll
Up/Down or Left/Right key through the menu and select
functions according to the prompt on the screen.
ii. If the menu contains submenus and further submenus, select
options and submenu you want according to the prompt on the
screen.
iii. Press OK key/Left select key or Right select key to set or return
to the previous menu. Press End key to exit to standby mode.
Bottom Menu Function:
If options are displayed on the bottom of the screen, press Left
select key to set and press Right select key to exit.
The functions of phone are mainly grouped in main Menu:
Names, Messages, Call History, Profiles, Display, Settings,
Orginiser, Do More and Games.
Please refer to the text hereinafter in this manual in detail.
![](/img.php?id=917051&img=bg1f.png)
23
4 Names
You can save contacts in phone and UIM card. Each contact in
phone’s memory has three phone numbers. Select Memory Status to
view memory of phone and UIM card.
4.1 Finding Records
You can search for a name or number in Names in pop-up window
by choosing:
In All Contacts
1. Select Menu → Names.
2. Select All List. You can key in the first characters of the name
you are searching for to view contact directly in All List.
3. Press Up/Down key to scroll though the corresponding name(s)
and records in the list. Scroll to the name you want, and press OK key
to view the details or select Option.
![](/img.php?id=917051&img=bg20.png)
24
Find
1. Select Menu → Names→Find.
2. Select
- Find Name: You can key in the first characters of the name you
are searching for to view contact directly in All List.
- Find Number: Key the phone number you are searching for to
view contact directly in All List.
- Find Group: Select group, UIM, No group, Family, Relatives,
Friends, Business, Colleagues, School, Club,VIP to view the records
in group.
In Standby Mode:
To quickly find phone number in Names in standby mode, press
Right select key.
All the contacts will be list by the letter of the name. If no contact in
the list, “No Record” will be displayed.
4.2 Adding New Record
Save to Phone:
1. Select Menu→ Names→ Add Name.
2. Select would-be added information: Name, Existing Name.
3. Select the save position the new information, Phone or UIM.
3. Press OK key/Left select key to Add Name/Group/Home
Number/Mobile Number/Office Number and set Call Alert/Sms
![](/img.php?id=917051&img=bg21.png)
25
Alert of the contact. See “13. Text Input” more instructions for
writing text and character.
4. After the completion of writing, press OK key/Left select key to
save the contact.
5. Scroll to the just-added phone number to reedit, press OK
key/Left select key. Further operation can be executed, such
as:
Edit: Edit the number.
Send Message: Send message to this number.
Make a call: Make a call to this number.
Send Name: Send the name and number of the contact as
a message.
Erase: Delete the number.
Copy to UIM: Copy the phone number to the UIM.
Move to UIM: Move this number to the UIM.
Set to Speed Dial: Assign a speed dial number to the
phone number.
Default Number: Set the number as the default number.
When you make setting, the other numbers in this contact
will be deleted.
Save to UIM:
1. Select Menu→ Names→ Add Name.
2. Select would-be added information: Name, Existing Name.
3. Select UIM and press OK key to add Name/Number. See “13.
![](/img.php?id=917051&img=bg22.png)
26
Text Input” more instructions for writing text and character.
4. After the completion of writing, press OK key/Left select key to
save the contact.
5. Scroll to the just-added phone number to reedit, press OK key
or select Option. Further operation can be executed, such as:
Edit: Edit the number.
Send Message: Send message to this number.
Make a call: Make a call to this number.
Send Name: Send the name and number of the contact as
a message.
Erase: Delete the number.
Copy to Phone: Copy the phone number to the Phone.
Move to Phone: Move this number to the Phone.
Note: In standby mode, key in phone number, press Left select
key to save.
If you save the same number again, the phone prompts to remind
you this number is already exist.
4.3 Viewing Records
1. Select Menu→ Names.
2. Select All List to see All records in phone and UIM card.
3. Press Left/Right key to see the contacts in UIM, or different
groups in No Group, Family, Relatives, Friends, Business,
Colleagues, School, Club and VIP. Scroll to the name you want, and
![](/img.php?id=917051&img=bg23.png)
27
press OK key to view the details or select Option.
Note: When there is no storage record in Contacts, it will indicate
“No item”.
4.4 Erasing Records
4.4.1 Erasing a Record
1. Select Menu → Names.
2. Select All List or Find to search for would-be erased record.
3. Scroll to the record you want to erase and press OK key.
4. Select Option to Erase contact, and press OK key/Left select
key. “Confirm to erase?” indicated on the display.
6. Press OK key/Left select key to confirm.
4.4.2 Erasing All Contacts
1. Select Menu → Names.
2. Select All List or Find to search for would-be erased record.
3. Scroll to the record you want to erase and press OK key/Left
select key.
4. Select Option to Erase All contact, and press OK key/Left
select key. “Erase All Records?” indicated on the display.
6. Press OK key/Left select key to confirm.
Note: There five built-in records which are very useful and can not
be erased.
![](/img.php?id=917051&img=bg24.png)
28
4.5 Editing Records
1. Select Menu→ Names.
2. Select All List or Find to search for would-be edited record.
3. Scroll to the record you want to edit and press OK key/Left
select key.
4. Select Option to Edit name, press OK key/Left select key to
confirm.
5. You can edit the Name/Group/Home Number/Mobile
Number/Office Number/ Call Alert/Sms Alert of the contact
6. Select Save, “Succeed to save”appears on the display.
4.6 Setting Speed Dial
In standby state, you can make a Speed Dial of stored number by
keying in one or two-digit digit (5-99).
1. Select Menu→ Contacts.
2. Select View All or Find to search for the record you want to set
as speed dial number, press OK key, and then move to the number in
window, and press OK key or Left select key.
3. Select Set to Speed Dial.
4. Select an Empty slot in list.
5. Press OK key.
Note: There four built-in records in Speed Dial List which are very
useful and can not be erased.
![](/img.php?id=917051&img=bg25.png)
29
4.7 Viewing and Making Speed Dial
Viewing:
Select Menu→ Names→ Speed Dial to view all Speed Dial list.
Dialing:
You can make a call by entering speed dial number in the standby
mode.
Method 1: Enter speed dial number, press Send Key to dial.
Method 2: Directly hold the Speed Dial Number digit key. If the
Speed Dial Number is one-digit, directly hold the digit key. If the Speed
Dial Number is two-digit, press first digit key and then hold the second
one. For example: If the Speed Dial Number is 25, you should press 2
key firstly, and then hold 5 key, thus it can dial directly.
Note: Some handset may not support method 1. Some handset
support only one-digit speed dial number, some support both one-digit
and two-digit speed dial number.
4.8 Editing Group
You can group the stored records into Names.
1. Select Menu→ Names→Groups.
2. Select the group you wand eidt, No Group, Family, Relatives,
Friends, Business, Colleagues, School, Club or VIP.
3. Select
-View Members: view members of the group in detail.
-Set Ring Tone: set the specific ring tone of the group.
![](/img.php?id=917051&img=bg26.png)
30
-Set Msg Tone: set the specific Msg tone of the group.
-Edit Title: Rename the group.
4.9 Memory Status
1. Select Menu→ Names→ Memory Status.
2. View the number of saved entries and maximum number of
entries saved in phone and UIM card.
For example: phone: 8/500, UIM Card: 4/500, indicating that 500
records entries in Max., out of which eight have be saved in phone. And
500 entries in Max., out of which four have been saved in UIM Card.
Please consult with service supplier for storage capacity of UIM card.
![](/img.php?id=917051&img=bg27.png)
31
5 Messages
This is introduction of how to send, receive and erase the
messages in your phone.
Note:The function introduced hereinafter may differ with different
service offered in your area. Please consult with your service provider
for more detailed information.
5.1 Sending a New Message
Please consult with the service provider to support the network
service of sending message. You can only send message to the mobile
phone which can receive message.
1. Select Menu→ Messages→ Write.
2. Write message text. See “13. Text Input” more instructions for
writing text and character.
3. Select Option to.
- Send: Input the receiver’s Phone Number, hold # key to input
“:”, you can input the multi-receiver’s phone number.
Select Send in Option to send the message.
Select Names in Option to select phone number from Names.
![](/img.php?id=917051&img=bg28.png)
32
Select SMS Groups in Option to select SMS group you have
already set.
- Save: Save the message in Draft.
- Templates: Select preformatted phrases and sentences as
message text.
- Names: View the details of Names.
- Priority: Set the message priority as Normal, Urgent or
Emergency.
- Delivery Ack: Select On or OFF for you phone can or can not
automatically receive message from network informing you whether you
have sent the message successfully.
Note: The SMS centers of some cities and regions do not support
messages longer than 160 characters.
5.2 Receiving Incoming Call while Editing Message
• If you do not want to receive the incoming call, press End key.
• If you want to receive the incoming call, press Send key. After
receiving the call, you can continue to edit and send the message.
5.3 Reading Message
On receipt of a new message, the phone prompts you by vibration
or ringer (up to silence and ringer in Settings). Erase old messages to
keep space for new messages.
1.Select Menu→ Messages→ Inbox.
2. Scroll to the message you want to read.
![](/img.php?id=917051&img=bg29.png)
33
3. Press OK key to read message. You also press Up/Down key
to scroll.
4. After reading, selection Option to:
-Reply:Reply message to sender.
-Forward: Forward the message to other recipients.
-Erase:Erase this message.
-Voice call:Call back to sender.
-Save number: select New to save sender’s number to contacts,
select Existing Name to save the sender’s number to existed records
in the contacts.
-Copy to UIM/Phone:Move message to UIM Card/phone
5.4 Viewing OutBox
1. Select Menu→ Messages→ OutBox.
2. Select Sent or Unsent.
3. Scroll to the message you want read and press OK key to read
message.
4. Press Right select key to return to the list. Press OK key or
Left select key to Erase, Forward (if the message has been sent
successfully, there is no this function) the message.
5.5 Reading Voice Mail
Before using Voice Mail, please consult with network provider to
confirm that the function of voice mail box has been activated. After
your successful setting, network will automatically transfer divert
![](/img.php?id=917051&img=bg2a.png)
34
incoming call(s) to your voice mail box, and send message(s) to your
phone.
Select Call Voicemail to read the message and then dial voice
mail box number to listen to the leaving message following guide
prompt.
Select Voice Mail Number to set the voicemail Number.
To read your voice mail, press for seconds to dial voice
mail box number in standby mode.
Note: The function needs network support.
5.6 Sending Templates Messages
The phone has a group of some common built-in phrases and
sentences, such as, “Please call”, “Where are you? Can we talk?” etc.
1. Select Menu→ Messages→ Templates.
2. Scroll to the message you want to send.
3. Press OK key or Left select key to View or Edit.
4. You can edit, save or send message, and set Priority and
Delivery Ack of message. For detail, pls see “5.1 Sending a new
message”.
5.7 Setting Message Groups
You can send messages to grouped mobile phone which can
receive message meanwhile.
1. Select Menu→ Messages→ Msg Groups.
2. Select any SMS Groups (1-5) and add receiver into those groups.
![](/img.php?id=917051&img=bg2b.png)
35
All the phone numbers displayed listed in pop-up window can be
reedited. The maximum of receivers not exceed 10 persons.
3. Select options to:
- Send: Send message to the recipient selected.
- Send To All: Send messages to all the recipients in group.
- Replace: Reedit the number in group.
- Remove Member: Erase the recipients in group.
- Clear Group: Clear all the recipients’ information in group.
- Add: Add new recipient in group.
5.8 Erasing Messages
Delete and erase old messages to release space for phone’s SMS
memory. You can select erasing messages when sending or reading
messages; erase messages one by one or all in Inbox, Outbox and UIM
Card.
5.8.1 Erasing a Message
1. Select Menu→ Messages.
2. Select messages location: Inbox, Outbox, Draft.
3. Press Up/down key to select to-be-erased messages.
4. Select Erase to erase messages. “Delete?” appears.
5. Select OK to erase this message.
5.8.2 Erasing All Messages
1. Select Menu→ Messages→ Erase Msgs.
![](/img.php?id=917051&img=bg2c.png)
36
2. Select an option in list:
- Inbox:Erase all messages in Inbox.
- Outbox: Erase all messages in Outbox.
- Draft: Erase all messages in Draft.
- All Messages:Erase all messages in phone and UIM card.
5.9 Message Settings
You can set your message box before you use it, such as, Text
Msg Setting and General.
5.9.1 Msg Priority
1. Select Menu→ Messages→ Msg Settings→Text Msg
Setting→ Priority.
2. Select Normal, Urgent, Emergency for sending message.
5.9.2 Delivery Acknowledging
1. Select Menu→ Messages→Msg Settings→Text Msg
Setting→ Delivery Ack.
2. Select On or Off for your phone can or can not automatically
receive message from network informing you whether you have sent
message successfully.
5.9.3 Save Sent Message
1. Select Menu→ Messages→Msg Settings→Text Msg
Setting→ Save Sent Msg.
![](/img.php?id=917051&img=bg2d.png)
37
2. Select On or Off for your phone can or can not automatically
save sent message.
5.9.4 Automatically Erasing Inbox
Set erasing the last read message in Inbox automatically when
Inbox is full.
1. Select Menu→ Message→Msg Settings→General→ Auto
Delete Inbox.
2. Select On or Off and press OK key/Left select key.
5.9.5 Save Position
1. Select Menu→ Message→Msg Settings→General→Save
Position.
2. Select UIM or Phone and press OK key/Left select key to save
message in UIM card or phone.
5.9.6 Memory Status
1. Select Menu→ Message→Msg Settings→General→Memory
Status.
2. View the number of saved messges and maximum number of
messages saved in Inbox, Outbox, Draft in Phone and in UIM card.
For example: UIM Card: 4/500, Phone Inbox: 8/100, Phone Outbox:
4/100, Draft: 2/20, indicating that 500 records entries in Max., out of
which eight have be saved in UIM card, 100 records entries in Max.,
out of which eight have been saved in Phone Inbox, 100 records entries
![](/img.php?id=917051&img=bg2e.png)
38
in Max., out of which four have been saved in Phone Outbox, 20
records entries in Max., out of which two have been saved in Phone
Draft. Please consult with service supplier for storage capacity of UIM
card.
![](/img.php?id=917051&img=bg2f.png)
39
6 Call History
6.1 Viewing Recent Calls
Information of Missed Calls, Received Calls, Dialed Calls, Call
Duration, Erase History including name, phone number, and call time
and conversation duration is saved in the Call History.
1. Select Menu→Call History.
2. Select Missed Calls, Received Calls, Dialed Calls.
3. Press OK key/Left select key.
4. Select one entry of the records and press OK key/Left select
key.
5. Select option:
- Call Information:Indicate name, number, time and conversation
duration information.
- SMS:Send message to this number.
- Save:Save the number in Names.
![](/img.php?id=917051&img=bg30.png)
40
- Delete:Erase the number from the list of Call History.
- Edit: Edit the number.
- Black List:Add this number to the Black List.
If the UIM Card does not support the function of Incoming Call
Indication, you can only see part of the above-mentioned options.
6.2 Erasing Recent Calls List
1. Select Menu→Call History→Clear All.
2. Select Erase Missed, Erase Received, Erase Dialed.
3. Press OK key/Left slect key to delete all the numbers from the
list.
6.3 Call Duration
1. Select Menu→ Call History→ Call Duration.
2. Select an option from the list and press OK Key.
-Last Dialed Call:Indicate the talk time of the last dialed call.
The time can be reset.
-All Dialed Calls:Indicate the talk time of all dialed call. The time
can be reset.
-All Calls:Indicate the talk time of all dialed and received call.
The time can be reset.
-Reset Call Duration:To reset the call duration.
![](/img.php?id=917051&img=bg31.png)
41
7 Profiles
You can personalise your phone. There are many ways to change
the sound and feel of your phone.
You can Set, Profile Edit or Rename the current profile of Vibrate,
Silent, General, outdoor, Meeting, Headset to Set, Edit or Rename
the profile. In Profile Edit, you can select Ring Type, Ring Tone,
Ringer Volume, Earpiece Volume, Key Beep Volume, and Message
Alert to make specific modification.
![](/img.php?id=917051&img=bg32.png)
42
8 Display
8.1 Selecting Wallpaper
1. Select Menu→ Display→Language.
2. Press Up/Down Key to select Preset Wallpaper or Download
Wallpaper.
3. Press Up/Down Key to scroll the list and press OK key/Left
Select Key to confirm.
8.2 Setting Backlighting
During a call or pressing keys, the display lights on. You can set
lighting duration.
1. Select Menu→ Display →Backlight.
2. Select an option in pop-up window:
-10 Sec:Keep backlighting for 10 seconds after last pressing.
-30 Sec:Keep backlighting for 30 seconds after last pressing.
3. Press OK key to confirm.
Note:In conversation, backlighting consumes the power quickly
and shortens continues conversation and standby time.
![](/img.php?id=917051&img=bg33.png)
43
8.3 Setting Intensity
1. Select Menu→ Display→ Intensity.
2. Press Left/Right key to adjust Intensity, and press OK key/Left
Select Key.
8.4 Adjusting Contrast
1. Select Menu→ Display→ Contrast
2. Press Left/Right key to adjust contrast, and press OK key/Left
Select Key.
8.5 Selecting Language
1. Select Menu→ Display→Language.
2. Select English which is available, and press OK key/Left
Select Key.
8.6 Setting Time Format
1. Select Menu→Display→ Time Format.
2. Select AM/PM or 24 HR, and press OK key/Left Select Key.
8.7 Changing Banner
View and edit phone’s greeting to which appears on the display to
your own.
1. Select Menu→Display→ Banner.
2. Press OK key/Left Select Key to Edit.
3. Key in character(s) and press Right Select key to erase
![](/img.php?id=917051&img=bg34.png)
44
character(s).
4. Press OK key/Left Select Key to Save.
![](/img.php?id=917051&img=bg35.png)
45
9 Settings
In main Menu pop-up window, select Settings to enter into.
Your phone has different functions in Settings to meet your
requirement. They are: Call, Security, and Phone.
9.1 Call
When network supports, you can use network services of call
waiting and call forwarding.
Note:The functions of Call Waiting and Call forwarding are
network services. Please consult with network service provider to get
corresponding service application.
9.1.1 Call Waiting
During a call, use Call Waiting to answer the waiting call prompted
by the network; Or dial another call meanwhile putting the first call on
hold. These calls can be shifted while you have calls in conversation.
Call Waiting lets you enjoy three-party conversation without
missing call.
![](/img.php?id=917051&img=bg36.png)
46
1. Select Menu→ Settings→ Call → Call Waiting.
2. Select Option:
- Enable: To activate the Call Waiting function. The network will
notify you of an incoming call while you have a call in progress. You can
press Send key to get through the waiting call and switch one call to
another.
- Disable: To cancel the Call Waiting function.
- Edit Feature Code: To edit the Call Waiting Enable or Disable
number.
9.1.2 Call Forwarding
Use Call Forwarding to forward the incoming call to a designated
phone number. After setting of call forwarding, phone will automatically
dial network to set the function in active.
1. Select Menu→ Settings→ Call → Call Forwarding.
2. Set type of Call Forwarding, press OK key.
-Immediate: All is diverted Immediately in all conditions.
-Busy(Divert when busy): When the phone is busy, divert.
-No Answer(Divert when no answer): When there is no
answer, divert.
-Disable All:Cancel All Call Forwarding.
3. Select Other Number and press OK key.
Enable: To activate Call Forwarding function, input the
number to which the phone will forward. And then
![](/img.php?id=917051&img=bg37.png)
47
Continue to press OK key. If the number has been set,
directly press OK key to select Enable.
E.g. To forward incoming call to 12345678, input:
12345678, press OK key twice and confirm.
Disable: To deactivate Call Forwarding function.
Edit Featue Code: To edit the call forwarding number of
To Enable and To Disable.
4. Select Voice Mail and press OK key. Select Enable /Disable
or Edit Featue Code to activate/deactivate forwarding call to voice mail
or edit the call forwarding to voice mail number.
9.1.3 Anykey Answer
1. Select Menu→ Settings→ Call → Anykey Answer.
2. Select On/Off, and press OK key/Left Select Key.
When you set to answer call by any key, the incoming call can be
answered by pressing any key except End key, Left /Right select key.
9.1.4 Voice Privacy
1.Select Menu→ Settings→ Call →Voice Privacy.
2.Select Enhanced or Standard to set voice encryption in
Standard or set voice encryption Enhanced.
3. Press OK Key/Left Select Key.
9.1.5 International Call
![](/img.php?id=917051&img=bg38.png)
48
ZTEC330 has two solutions for international country code prefix, either
for standard based area or for network where standard based solution
is not implemented.
1. Select Menu→Settings→ Call→ International Call
2. Select option,
- Auto: “Do you want to activate this function?” display and
press OK key to confirm. In standard based area, to activate
international prefix “+” function instead of keying in international call
prefix, e.g. “00”, otherwise, select “No”. See “3.1 Making a Call” for
detail description.
- Manual: To set and edit the certain digit number(s) as the
international prefix. As in some area, the network standard based
solution is not implemented.
9.1.6 Call Timer
1.Select Menu→ Settings→ Call → Call Timer.
2.Select On or OFF to set call timer on diplay or not when finishing
the call.
3. Press OK Key/Left Select Key.
9.1.7 Call Connect Alert
1.Select Menu→ Settings→ Call → Call Connect Alert.
2.Select On or OFF to set the phone alert when call connected.
3. Press OK Key/Left Select Key.
![](/img.php?id=917051&img=bg39.png)
49
9.1.8 Fire Proof
You can set Incoming calls bar in Fire Proof submenu including
Friend List, Black List, Current Settings.
Friend List
All the contacts will be listed by the letter of the name.
1. Select Menu→ Settings→Call →Fire Proof→Friend List.
2. Select options or scroll to one contact listed and select options:
Add: Add new contact in Friend List.
Edit: Edit this contact in Friend List.
Delete: Delete this contact in Friend List.
Clear All: Delete all the contacts in Friend List. If there is no
contact in the list, “List Empty” will be displayed.
Black List
All the contacts will be listed by the letter of the name.
1. Select Menu→ Settings→Call →Fire Proof→Black List.
2. Select options or scroll to one contact listed and select options:
Add: Add another new contact in Black List.
Edit: Edit this contact in Black List.
Delete: Delete this contact in Black List.
Clear All: Delete all the contacts in Black List. If there is no
contact in the list, “List Empty” will be displayed.
Current Settings
You can set barring applications as follows:
Bar All: Bar all incoming calls.
![](/img.php?id=917051&img=bg3a.png)
50
Bar Black List: Only bar numbers listed in Black List.
Bar All Except Friend List: Only numbers listed in Friend
List are not blocked.
Cancel All: Cancel barring setting.
9.2 Security Settings
Introduction to phone’s security options preventing others to avoid
illegal use or acquire your phone’s personal information. Please input
right phone Password and PIN code to enter.
Note:Consecutive inputting wrong PIN code for several times can
cause locking of UIM Card. To unlock, you need PUK. PIN code and
PUK Code may be offered together with the UIM Card. If not, please
contact with network operator. The default phone password is 0000, the
default PIN code is 1234, please change it to your own PIN code and
phone password as soon as possible.
9.2.1 Setting PIN Code
1. Select Menu→ Settings→ Security.
2. Input your phone password, press OK key/Left select key.
3. Move to PIN Lock, set On,Off or Change Lock, press OK
key/Left select key.
9.2.2 Setting Phone Lock
1. Select Menu→ Settings→ Security.
2. Input your phone password, press OK key/Left select key.
![](/img.php?id=917051&img=bg3b.png)
51
3. Move to Handset Lock, set On,Off or Change Lock, press OK
key/Left select key.
9.2.3 Viewing Emergency Numbers
1. Select Menu→ Settings→ Security.
2. Input your phone password, press OK key.
3. Move to Emergency Numbers to view.
9.2.4 Resetting
Your phone offers factory default phone setting. You may modify
some options when you use phone. You can also Restore Factory
Default to renew some modified options to the origin.
1. Select Menu→ Settings→ Security.
2. Input your phone password, press OK key.
3. Select Clear All Names, Reset Settings, or Reset Phone.
4. Select Ok to revert to confirm resetting or restoring factory
default or select Cancel to exit.
Note: Restoring the phone do not influence your phone password,
PIN code, Recent Calls, Contacts, InBox and OutBox.
Some setting, e.g. alarm, cannot be restored.
9.3 Phone
9.3.1 Auto Key Guard
1. Select Menu→ Settings→ Phone→ Key Guard to set phones’
![](/img.php?id=917051&img=bg3c.png)
52
key lock and time.
2. Select an option in pop-up window:
-Off:Deactivate the function of phones’ key lock.
-30 S auto-guard:Phones’ key locked automatically 30 seconds
after the last key pressing.
-2 M auto-guard:Phones’ key locked automatically 2 minutes
after the last key pressing.
3. Press OK key/Left select key to confirm.
Note:
- Hold # key to lock the keypad directly in standby mode.
- In state of key lock, to make use of phone, unlocking code should
be input prompted by phone on the display.
9.3.2 Alert
1. Select Menu→ Settings→ Phone→ Alert.
2. Select an option on display and press OK key.
-Service:When there are service available.
-Remind Minute:During a call, ten seconds ahead of every
minute, alert.
-Missed Call: When there are missed calls, alert.
-Roaming: When roam in active and handoff between service
areas or states occurs, alert.
For the function mentioned above, select On to operate; select Off
to cancel alert.
![](/img.php?id=917051&img=bg3d.png)
53
9.3.3 Version
PRL Version: Shows present PRL (Personal Roaming List)
version of phone.
SW Version: Shows present software version of phone.
HW Version: Shows present hardware version of phone.
![](/img.php?id=917051&img=bg3e.png)
54
10 Organiser
Extra offers two games: Hit Rat and Greedy Snake, as well as
tools, such as, Alarm Clock, Calculator, Calendar, Stopwatch, and
Radio.
10.1 Scheduler
1. Select Menu→Organiser→ Scheduler.
2. Press Left/Right key or Up/Down key to select exact date you
want to view in pop-up calendar window. Press OK key.
3. Scroll Up/Down key to select options.
10.2 Voice Memo
ZTEC330 supports Voice Memo function either in or not in
conversation with a capacity of saving 5 pcs records in max. When
there is no space in Voice Memo or Voice Memo is full, the phone
prompts.
![](/img.php?id=917051&img=bg3f.png)
55
10.2.1 Recording in Normal
1. Select Menu→Organiser→ Voice Memo.
2. Scroll Up/Down key to select:
Record – When you are not in conversation, select Start
to begin a new Recording, or Stop/ Pause recording.
After Record ended, select Option to Review, Re-record
or Save the file.
Review – see the Record list, press OK key to display.
Select Option to
Erase: to erase the record.
Erase all: to erase all record list.
Info: the title, length, size, and time information of the
record.
Note: The record saved in normal will be listed in Profiles→
Vibrate/Silent/General/Outdoor/Meeting/Handset→ Profile Edit
→Ring Tone→ Ring Type→ Record Ring as a kind of ringer
tone.You can select it or not as you like as ring of the phone. The
record can not be deleted as if it is activated as the ringer, unless you
cancel the record as the ring of the phone.
10.2.2 Recording in Conversation
When you are in conversation, select Record to pop-up window
of Voice Memo and select Start to begin a new Recording, or Stop,
Pause/Resume recording, without ending the call.
![](/img.php?id=917051&img=bg40.png)
56
The record will be saved automatically when the call is ended
without finishing recording, and exit back to interface of ending call.
10.2.3 Recording with Incoming Call/Message
With Incoming Call
While recording in state of non-conversation, receive a call
will stop recording. The record of phone will be saved
automatically and return to call interface.
With Message
While recording in state of non-conversation, receive a
message won’t stop recording. The phone prompts message alert
without display message interface.
With Others
- Alarm: Prompts later.
- Alert: Prompts later.
-Power off automatically while recording. Save record
automatically.
Note: In state of non-conversation, record voice via MIC; In state of
conversation, record voice via earpiece.
10.3 Alarm
Set alarm alert at a certain time. Alarm alerts only when the
phone is in power on.
1. Select Menu→Orginiser→ Alarm.
2. Select Set alarm to set, and press OK key. Select Alarms List
![](/img.php?id=917051&img=bg41.png)
57
to view the settings. Select Set rest day to set the date of
alarm. Select Delete all to delete all setting.
3. When alarm rings, select OFF to stop alarming or select
Snooze to postpone alarming time. Alarm rings again 10
minutes later.
10.4 Stopwatch
1. Select Menu→ Orginiser→ Stopwatch.
2. Select Start to make stopwatch timing.
3. Select Stop to stop timing.
4. Select Reset to clear the time record.
10.5 Calculator
Use calculator to execute basic math calculation.
1. Select Menu→ Orginiser→ Calculator.
Key in digits. Press Left/Right key or Up/Down key to choose
“+”“-”“x”“/”according to the prompt. Press # key to input decimal
point, and press * key to change digit to positive number or negative.
Press OK key to display the result.
/ Division Sign
- Subtraction Sign
= Equal Sign
+ Plus Sign
x Multiply Sign
![](/img.php?id=917051&img=bg42.png)
58
. Decimal Point
Press Right Select key to erase digit one by one and exit to
previous window, press Left Select key to erase all digits and reset,
press End key to exit to standby mode.
Note:This calculator has a limited accuracy and is designed for
simple calculations.
![](/img.php?id=917051&img=bg43.png)
59
11 Do More
This function needs network support by service provider. If your
UIM card can also support, menu of SMS Service or TATA zone
appears on the display. If UIM Card and network provider don’t support,
the function is invalid. The application of this function may ask for
extra fee. Please contact with network provider to acquire more
information.
![](/img.php?id=917051&img=bg44.png)
60
12 Games
12.1 Brick attack
In this game, paddle the bar to rebound the ball and attack bricks
with skill. And then enter next stage.
1. Select Menu→ Games→ Brick attack.
2. Press Left Select key or OK key, the display shows greeting
and play guide.
3.Select Newgame to start, press Left/Right key to move the
paddle bar left/right. Press Right select key to pause the game..
4. As passing a stage, select Continue to next stage, select Exit
to exit the game.
12.2 Push Box
In this game, pushing boxes with skill and locating them to stated
![](/img.php?id=917051&img=bg45.png)
61
locations. And then enter next stage.
1. Select Menu→ Games→ Push Box.
2. Press OK key, the display shows greeting and play guide.
3.Select New Game to start,select Stage and key in stage level.
Press OK key to start.
4. As passing a stage, select Replay to replay again, select Next
to enter next stage.
![](/img.php?id=917051&img=bg46.png)
62
13 Text Input
Your phone offers text input modes: Multitap Input (Abc/ABC),
Numbers Input (123), eHiText Input (eHi), and Symbol Input (Symbols).
Input mode includes capital letter and lowercase mode.
You can key in letters, digits, characters and symbols when writing
text or editing contact record information in Names or Messages etc.,
following the common instruction in hereinafter table.
Operation Method
Input Letters Multitap (Abc/ABC) Input—“Abc/ABC”,
press corresponding letter key till the letter
appears.
Input Words eHiText Input—“eHi”, press any key once
to key in any word.
Input Digits Numbers Input—“123”, press digit key
once.
Input Symbol Symbols Input — enter the symbols by
pressing corresponding digit key. Or press
“1” key till the symbol (common symbols)
appears except for Numbers Input mode.
Input Space Press 0 key, except for being in numbers
mode.
![](/img.php?id=917051&img=bg47.png)
63
Erase Character
Press Right select key .
Erase all the
characters Hold Right select key till all the
characters be erased.
Move cursor left or
right Press Left/Right key.
Change input mode
Press # key to select another text
mode.
Capitalization Press * key to switch between
capitalization and lowercase.
10.1 Multitap Input
Select Multitap Input (Abc/ABC) — Each key stands for multiple
letters. Press key till your letter appears. When the cursor moves, enter
the next letter.
10.2 Numbers Input
Select Numbers Input (123) — Press the corresponding key once
to input the number. In Numbers input mode, you can not enter space.
10.3 eHiText Input
Select eHiText Input (eHi) — Predictive word input is based on a
built-in dictionary.
![](/img.php?id=917051&img=bg48.png)
64
One letter asks for pressing only once.
Press the digit key corresponding to the letters once till the word
appears on the screen.
If the word displayed is not the word you want, press Up/Down key
to look for another matching word. Then press OK key to confirm.
10.4 Symbols Input
- Press 1 key to input till the symbol appears. Most common
punctuation marks and special characters are available.
Or select Symbols:
- Press Up/Down key to page down. And press digit key to enter
corresponding symbol.
![](/img.php?id=917051&img=bg49.png)
65
14 Troubleshooting
If your phone appears following phenomenon in the process of
application, please read following relative information at first. If the
problems still can not be solved, please contact with the distributor or
service provider.
Problem Check Point
When switching on the phone, it
prompts “Enter PIN”.
Please input your PIN Code which
offered with UIM Card together. If
you have changed PIN code,
please input new PIN Code. You
can also set PIN code
deactivated, see “9.2 Security
Settings”.
When switching on the phone, it
prompts “Insert card and restart
phone”.
Please check whether valid UIM
card is inserted or not.
No key beep on pressing keys. Please check the setting of Key
Beep in Settings.
When there is an incoming call,
the prompt ringer not rings.
Please check the setting of sound
Alert Type and ringer Volume in
Settings.
![](/img.php?id=917051&img=bg4a.png)
66
No prompt tone at alarm time. Please check relative sound
setting (Alert Type and ringer
Volume in Settings).
Messages cannot be sent. Please check the signal of
network.